Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=15653): Process ended prematurely: osmo-stp_10.42.42.5(pid=15653) [trial-2389↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15653)]
Standard Output
---------------------------------------------- trial-2389 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 11:48:47.562486 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:47.573939 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:48:47.728417 tst cs_paging_gprs_active.py: using LAC 33736 11:48:47.858056 tst cs_paging_gprs_active.py: using RAC 76 11:48:47.995315 tst cs_paging_gprs_active.py: using CellId 33736 11:48:48.125537 tst cs_paging_gprs_active.py: using BVCI 33737 11:48:48.150943 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:48.162411 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:48.173599 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:48.184675 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:48.196023 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:48.207605 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:48.219229 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:48.230695 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:48:48.242350 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:48:48.360437 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:48:48.660031 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:48:48.798557 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:48:49.143350 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15643): Launched 11:48:49.425868 run iperf3-srv_10.42.42.10(pid=15644): Launched 11:48:49.617001 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:48:49.746316 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:48:50.071752 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15645): Launched 11:48:50.342578 run iperf3-srv_10.42.42.10(pid=15646): Launched 11:48:50.532743 tst cs_paging_gprs_active.py:38: start network... 11:48:50.662648 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:48:51.165580 run create_hlr_db(pid=15647): Launched 11:48:51.345085 bus /gobi_6: Setting Powered False 11:48:52.365894 run create_hlr_db(pid=15647): Terminated: ok {rc=0} 11:48:52.809191 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15649): Launched 11:48:53.146608 run osmo-hlr_10.42.42.2(pid=15650): Launched 11:48:53.272589 run osmo-stp_10.42.42.5: Starting osmo-stp 11:48:53.848570 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15652): Launched 11:48:54.183673 run osmo-stp_10.42.42.5(pid=15653): Launched 11:48:54.304662 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:48:54.885946 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15655): Launched 11:48:55.004915 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:48:55.297353 run patchelf(pid=15656): Launched 11:48:55.491674 run osmo-stp_10.42.42.5(pid=15653): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15653)] 11:48:55.634551 run osmo-stp_10.42.42.5(pid=15653): stdout: | (launched: 2022-12-13_11:48:54.017793) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:48:55.777376 run osmo-stp_10.42.42.5(pid=15653): stderr: | �[0;m�[38;5;43m20221213114854214 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213114854214 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213114854214 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213114854215 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213114854215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213114854215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213114854215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:48:55.914389 run osmo-stp_10.42.42.5(pid=15653): stdout: | (launched: 2022-12-13_11:48:54.017793) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:48:56.050737 run osmo-stp_10.42.42.5(pid=15653): stderr: | �[0;m�[38;5;43m20221213114854214 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213114854214 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213114854214 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213114854215 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213114854215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213114854215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213114854215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:48:56.209783 run patchelf(pid=15656): Terminating (SIGINT) 11:48:56.395978 run patchelf(pid=15656): Terminated: ok {rc=0} 11:48:56.430105 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15653): Process ended prematurely: osmo-stp_10.42.42.5(pid=15653) [trial-2389↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15653)] [trial-2389↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 11:48:56.440121 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 11:48:56.504446 run osmo-hlr_10.42.42.2(pid=15650): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15650)] 11:48:56.556625 run osmo-hlr_10.42.42.2(pid=15650): stdout: | (launched: 2022-12-13_11:48:52.978827) 11:48:56.609713 run osmo-hlr_10.42.42.2(pid=15650): stderr: | �[0;m�[1;31m20221213114853178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213114853178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213114853178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213114853178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213114853178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213114853179 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213114853190 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213114853199 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213114853199 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213114853199 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:48:56.655044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15643): Terminating (SIGTERM) 11:48:56.698233 run iperf3-srv_10.42.42.10(pid=15644): Terminating (SIGTERM) 11:48:56.741699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15645): Terminating (SIGTERM) 11:48:56.784325 run iperf3-srv_10.42.42.10(pid=15646): Terminating (SIGTERM) 11:48:56.827698 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15649): Terminating (SIGTERM) 11:48:56.870248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15652): Terminating (SIGTERM) 11:48:56.912704 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15655): Terminating (SIGTERM) 11:48:56.922735 --- ParallelTerminationStrategy: PID 15643 died... 11:48:56.979972 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15643): Terminated: ok {rc=0} 11:48:56.990054 --- ParallelTerminationStrategy: PID 15644 died... 11:48:57.046767 run iperf3-srv_10.42.42.10(pid=15644): Terminated {rc=256} 11:48:57.056776 --- ParallelTerminationStrategy: PID 15645 died... 11:48:57.113452 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15645): Terminated: ok {rc=0} 11:48:57.123450 --- ParallelTerminationStrategy: PID 15646 died... 11:48:57.179906 run iperf3-srv_10.42.42.10(pid=15646): Terminated {rc=256} 11:48:57.189925 --- ParallelTerminationStrategy: PID 15649 died... 11:48:57.246874 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15649): Terminated: ok {rc=0} 11:48:57.256844 --- ParallelTerminationStrategy: PID 15652 died... 11:48:57.313485 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15652): Terminated: ok {rc=0} 11:48:57.323563 --- ParallelTerminationStrategy: PID 15655 died... 11:48:57.380272 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15655): Terminated: ok {rc=0} 11:48:57.467720 bus /gobi_0: Setting Powered False 11:48:58.574289 bus /gobi_0: Setting Powered False 11:48:59.687147 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15653): Process ended prematurely: osmo-stp_10.42.42.5(pid=15653) [trial-2389↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15653)]