Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=15586): Process ended prematurely: osmo-stp_10.42.42.5(pid=15586) [trial-2389↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15586)]
Standard Output
---------------------------------------------- trial-2389 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:47:47.934728 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:47.945989 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:47:48.073302 tst cs_paging_gprs_active.py: using LAC 33731 11:47:48.194568 tst cs_paging_gprs_active.py: using RAC 71 11:47:48.316454 tst cs_paging_gprs_active.py: using CellId 33731 11:47:48.436844 tst cs_paging_gprs_active.py: using BVCI 33732 11:47:48.460595 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:48.471440 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:48.482272 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:48.492875 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:48.503354 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:48.513854 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:48.524661 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:48.535206 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:47:48.545905 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:47:48.670200 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:47:48.954372 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:47:49.084102 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:47:49.405867 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15576): Launched 11:47:49.674863 run iperf3-srv_10.42.42.10(pid=15577): Launched 11:47:49.862869 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:47:49.991020 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:47:50.314307 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15578): Launched 11:47:50.582586 run iperf3-srv_10.42.42.10(pid=15579): Launched 11:47:50.770012 tst cs_paging_gprs_active.py:38: start network... 11:47:50.898233 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:47:51.399745 run create_hlr_db(pid=15580): Launched 11:47:51.578781 bus /gobi_6: Setting Powered False 11:47:52.599556 run create_hlr_db(pid=15580): Terminated: ok {rc=0} 11:47:53.013967 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15582): Launched 11:47:53.324813 run osmo-hlr_10.42.42.2(pid=15583): Launched 11:47:53.446738 run osmo-stp_10.42.42.5: Starting osmo-stp 11:47:53.991857 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15585): Launched 11:47:54.303956 run osmo-stp_10.42.42.5(pid=15586): Launched 11:47:54.417708 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:47:54.959024 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15588): Launched 11:47:55.069751 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:47:55.342242 run patchelf(pid=15589): Launched 11:47:55.523150 run osmo-stp_10.42.42.5(pid=15586): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15586)] 11:47:55.655403 run osmo-stp_10.42.42.5(pid=15586): stdout: | (launched: 2022-12-13_11:47:54.148753) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:47:55.788256 run osmo-stp_10.42.42.5(pid=15586): stderr: | �[0;m�[38;5;43m20221213114754319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213114754319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213114754319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213114754320 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213114754322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213114754322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213114754322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:47:55.915912 run osmo-stp_10.42.42.5(pid=15586): stdout: | (launched: 2022-12-13_11:47:54.148753) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:47:56.041970 run osmo-stp_10.42.42.5(pid=15586): stderr: | �[0;m�[38;5;43m20221213114754319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213114754319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213114754319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213114754320 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213114754322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213114754322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213114754322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:47:56.189545 run patchelf(pid=15589): Terminating (SIGINT) 11:47:56.362941 run patchelf(pid=15589): Terminated: ok {rc=0} 11:47:56.394681 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15586): Process ended prematurely: osmo-stp_10.42.42.5(pid=15586) [trial-2389↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15586)] [trial-2389↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:47:56.404048 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 11:47:56.464383 run osmo-hlr_10.42.42.2(pid=15583): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15583)] 11:47:56.513772 run osmo-hlr_10.42.42.2(pid=15583): stdout: | (launched: 2022-12-13_11:47:53.171297) 11:47:56.563848 run osmo-hlr_10.42.42.2(pid=15583): stderr: | �[0;m�[1;31m20221213114753351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213114753351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213114753351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213114753351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213114753351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213114753351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213114753364 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213114753372 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213114753373 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213114753373 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:47:56.606529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15576): Terminating (SIGTERM) 11:47:56.646799 run iperf3-srv_10.42.42.10(pid=15577): Terminating (SIGTERM) 11:47:56.686899 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15578): Terminating (SIGTERM) 11:47:56.726793 run iperf3-srv_10.42.42.10(pid=15579): Terminating (SIGTERM) 11:47:56.766819 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15582): Terminating (SIGTERM) 11:47:56.806827 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15585): Terminating (SIGTERM) 11:47:56.847048 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15588): Terminating (SIGTERM) 11:47:56.856230 --- ParallelTerminationStrategy: PID 15576 died... 11:47:56.909843 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15576): Terminated: ok {rc=0} 11:47:56.919438 --- ParallelTerminationStrategy: PID 15577 died... 11:47:56.972327 run iperf3-srv_10.42.42.10(pid=15577): Terminated {rc=256} 11:47:56.981748 --- ParallelTerminationStrategy: PID 15578 died... 11:47:57.035199 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15578): Terminated: ok {rc=0} 11:47:57.044843 --- ParallelTerminationStrategy: PID 15579 died... 11:47:57.097933 run iperf3-srv_10.42.42.10(pid=15579): Terminated {rc=256} 11:47:57.107355 --- ParallelTerminationStrategy: PID 15582 died... 11:47:57.160166 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15582): Terminated: ok {rc=0} 11:47:57.170043 --- ParallelTerminationStrategy: PID 15585 died... 11:47:57.222839 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15585): Terminated: ok {rc=0} 11:47:57.232236 --- ParallelTerminationStrategy: PID 15588 died... 11:47:57.285488 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15588): Terminated: ok {rc=0} 11:47:57.374309 bus /gobi_0: Setting Powered False 11:47:58.478578 bus /gobi_0: Setting Powered False 11:47:59.591902 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15586): Process ended prematurely: osmo-stp_10.42.42.5(pid=15586) [trial-2389↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15586)]