Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=15100): Process ended prematurely: osmo-stp_10.42.42.5(pid=15100) [trial-2389↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15100)]
Standard Output
---------------------------------------------- trial-2389 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 11:40:49.432096 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:40:49.443113 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:40:49.590993 tst cs_paging_gprs_active.py: using LAC 33694 11:40:49.715882 tst cs_paging_gprs_active.py: using RAC 34 11:40:49.839650 tst cs_paging_gprs_active.py: using CellId 33694 11:40:49.970733 tst cs_paging_gprs_active.py: using BVCI 33695 11:40:49.996641 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:40:50.008346 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:40:50.019854 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:40:50.031327 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:40:50.043001 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:40:50.055126 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:40:50.067239 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:40:50.078932 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:40:50.090926 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:40:50.209493 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:40:50.513146 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:40:50.652733 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:40:51.000267 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15089): Launched 11:40:51.288333 run iperf3-srv_10.42.42.10(pid=15090): Launched 11:40:51.493591 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:40:51.633484 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:40:51.987225 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15092): Launched 11:40:52.275147 run iperf3-srv_10.42.42.10(pid=15093): Launched 11:40:52.479940 tst cs_paging_gprs_active.py:38: start network... 11:40:52.619132 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:40:53.145215 run create_hlr_db(pid=15094): Launched 11:40:53.339239 bus /gobi_6: Setting Powered False 11:40:54.359346 run create_hlr_db(pid=15094): Terminated: ok {rc=0} 11:40:54.779759 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15096): Launched 11:40:55.093553 run osmo-hlr_10.42.42.2(pid=15097): Launched 11:40:55.217128 run osmo-stp_10.42.42.5: Starting osmo-stp 11:40:55.767316 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15099): Launched 11:40:56.081348 run osmo-stp_10.42.42.5(pid=15100): Launched 11:40:56.194462 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:40:56.741399 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15102): Launched 11:40:56.851978 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:40:57.124885 run patchelf(pid=15103): Launched 11:40:57.306700 run osmo-stp_10.42.42.5(pid=15100): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15100)] 11:40:57.439983 run osmo-stp_10.42.42.5(pid=15100): stdout: | (launched: 2022-12-13_11:40:55.925428) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:40:57.573785 run osmo-stp_10.42.42.5(pid=15100): stderr: | �[0;m�[38;5;43m20221213114056100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213114056100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213114056100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213114056101 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213114056103 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213114056103 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213114056103 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:40:57.702086 run osmo-stp_10.42.42.5(pid=15100): stdout: | (launched: 2022-12-13_11:40:55.925428) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:40:57.829635 run osmo-stp_10.42.42.5(pid=15100): stderr: | �[0;m�[38;5;43m20221213114056100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213114056100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213114056100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213114056101 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213114056103 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213114056103 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213114056103 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:40:57.977967 run patchelf(pid=15103): Terminating (SIGINT) 11:40:58.152554 run patchelf(pid=15103): Terminated: ok {rc=0} 11:40:58.184482 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15100): Process ended prematurely: osmo-stp_10.42.42.5(pid=15100) [trial-2389↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15100)] [trial-2389↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 11:40:58.193903 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 11:40:58.253731 run osmo-hlr_10.42.42.2(pid=15097): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15097)] 11:40:58.302750 run osmo-hlr_10.42.42.2(pid=15097): stdout: | (launched: 2022-12-13_11:40:54.938165) 11:40:58.352280 run osmo-hlr_10.42.42.2(pid=15097): stderr: | �[0;m�[1;31m20221213114055120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213114055120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213114055120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213114055120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213114055120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213114055120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213114055133 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213114055142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213114055142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213114055142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:40:58.394340 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15089): Terminating (SIGTERM) 11:40:58.433793 run iperf3-srv_10.42.42.10(pid=15090): Terminating (SIGTERM) 11:40:58.473329 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15092): Terminating (SIGTERM) 11:40:58.512859 run iperf3-srv_10.42.42.10(pid=15093): Terminating (SIGTERM) 11:40:58.552557 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15096): Terminating (SIGTERM) 11:40:58.592104 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15099): Terminating (SIGTERM) 11:40:58.631579 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15102): Terminating (SIGTERM) 11:40:58.640714 --- ParallelTerminationStrategy: PID 15089 died... 11:40:58.693872 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15089): Terminated: ok {rc=0} 11:40:58.703397 --- ParallelTerminationStrategy: PID 15090 died... 11:40:58.756205 run iperf3-srv_10.42.42.10(pid=15090): Terminated {rc=256} 11:40:58.765725 --- ParallelTerminationStrategy: PID 15092 died... 11:40:58.818324 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15092): Terminated: ok {rc=0} 11:40:58.827869 --- ParallelTerminationStrategy: PID 15093 died... 11:40:58.880487 run iperf3-srv_10.42.42.10(pid=15093): Terminated {rc=256} 11:40:58.890050 --- ParallelTerminationStrategy: PID 15096 died... 11:40:58.943086 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15096): Terminated: ok {rc=0} 11:40:58.952561 --- ParallelTerminationStrategy: PID 15099 died... 11:40:59.005412 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15099): Terminated: ok {rc=0} 11:40:59.014945 --- ParallelTerminationStrategy: PID 15102 died... 11:40:59.067703 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15102): Terminated: ok {rc=0} 11:40:59.155850 bus /gobi_0: Setting Powered False 11:41:00.258543 bus /gobi_0: Setting Powered False 11:41:01.391374 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15100): Process ended prematurely: osmo-stp_10.42.42.5(pid=15100) [trial-2389↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15100)]