Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=15027): Process ended prematurely: osmo-stp_10.42.42.5(pid=15027) [trial-2389↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15027)]
Standard Output
---------------------------------------------- trial-2389 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:39:48.391206 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:48.402183 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:39:48.536589 tst cs_paging_gprs_active.py: using LAC 33689 11:39:48.666649 tst cs_paging_gprs_active.py: using RAC 29 11:39:48.801992 tst cs_paging_gprs_active.py: using CellId 33689 11:39:48.932170 tst cs_paging_gprs_active.py: using BVCI 33690 11:39:48.957881 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:48.969307 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:48.980397 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:48.991640 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:49.003554 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:49.015378 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:49.027453 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:49.039451 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:39:49.051566 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:39:49.173127 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:39:49.457715 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:39:49.587972 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:39:49.914481 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15017): Launched 11:39:50.183986 run iperf3-srv_10.42.42.10(pid=15018): Launched 11:39:50.375037 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:39:50.505134 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:39:50.830450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15019): Launched 11:39:51.102079 run iperf3-srv_10.42.42.10(pid=15020): Launched 11:39:51.293066 tst cs_paging_gprs_active.py:38: start network... 11:39:51.422699 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:39:51.924419 run create_hlr_db(pid=15021): Launched 11:39:52.104199 bus /gobi_6: Setting Powered False 11:39:53.125571 run create_hlr_db(pid=15021): Terminated: ok {rc=0} 11:39:53.570604 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15023): Launched 11:39:53.908839 run osmo-hlr_10.42.42.2(pid=15024): Launched 11:39:54.030026 run osmo-stp_10.42.42.5: Starting osmo-stp 11:39:54.613065 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15026): Launched 11:39:54.950768 run osmo-stp_10.42.42.5(pid=15027): Launched 11:39:55.072305 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:39:55.659782 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15029): Launched 11:39:55.779287 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:39:56.073014 run patchelf(pid=15030): Launched 11:39:56.269433 run osmo-stp_10.42.42.5(pid=15027): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15027)] 11:39:56.412890 run osmo-stp_10.42.42.5(pid=15027): stdout: | (launched: 2022-12-13_11:39:54.783252) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:39:56.557077 run osmo-stp_10.42.42.5(pid=15027): stderr: | �[0;m�[38;5;43m20221213113954979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213113954979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213113954980 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213113954980 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213113954980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213113954981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213113954981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:39:56.695754 run osmo-stp_10.42.42.5(pid=15027): stdout: | (launched: 2022-12-13_11:39:54.783252) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:39:56.833313 run osmo-stp_10.42.42.5(pid=15027): stderr: | �[0;m�[38;5;43m20221213113954979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213113954979 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213113954980 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213113954980 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213113954980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213113954981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213113954981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:39:56.993554 run patchelf(pid=15030): Terminating (SIGINT) 11:39:57.180814 run patchelf(pid=15030): Terminated: ok {rc=0} 11:39:57.215236 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15027): Process ended prematurely: osmo-stp_10.42.42.5(pid=15027) [trial-2389↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15027)] [trial-2389↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:39:57.225391 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 11:39:57.289358 run osmo-hlr_10.42.42.2(pid=15024): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15024)] 11:39:57.341263 run osmo-hlr_10.42.42.2(pid=15024): stdout: | (launched: 2022-12-13_11:39:53.741362) 11:39:57.394038 run osmo-hlr_10.42.42.2(pid=15024): stderr: | �[0;m�[1;31m20221213113953944 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213113953945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213113953945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213113953945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213113953945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213113953945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213113954003 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213113954012 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213113954012 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213113954012 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:39:57.439195 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15017): Terminating (SIGTERM) 11:39:57.481599 run iperf3-srv_10.42.42.10(pid=15018): Terminating (SIGTERM) 11:39:57.523974 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15019): Terminating (SIGTERM) 11:39:57.566647 run iperf3-srv_10.42.42.10(pid=15020): Terminating (SIGTERM) 11:39:57.608848 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15023): Terminating (SIGTERM) 11:39:57.651337 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15026): Terminating (SIGTERM) 11:39:57.693690 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15029): Terminating (SIGTERM) 11:39:57.703083 --- ParallelTerminationStrategy: PID 15017 died... 11:39:57.759831 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15017): Terminated: ok {rc=0} 11:39:57.769942 --- ParallelTerminationStrategy: PID 15018 died... 11:39:57.826205 run iperf3-srv_10.42.42.10(pid=15018): Terminated {rc=256} 11:39:57.836169 --- ParallelTerminationStrategy: PID 15019 died... 11:39:57.892830 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15019): Terminated: ok {rc=0} 11:39:57.902886 --- ParallelTerminationStrategy: PID 15020 died... 11:39:57.959106 run iperf3-srv_10.42.42.10(pid=15020): Terminated {rc=256} 11:39:57.969167 --- ParallelTerminationStrategy: PID 15023 died... 11:39:58.025089 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15023): Terminated: ok {rc=0} 11:39:58.035456 --- ParallelTerminationStrategy: PID 15026 died... 11:39:58.091955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15026): Terminated: ok {rc=0} 11:39:58.102415 --- ParallelTerminationStrategy: PID 15029 died... 11:39:58.158805 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15029): Terminated: ok {rc=0} 11:39:58.246174 bus /gobi_0: Setting Powered False 11:39:59.348632 bus /gobi_0: Setting Powered False 11:40:00.459190 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15027): Process ended prematurely: osmo-stp_10.42.42.5(pid=15027) [trial-2389↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15027)]