Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=18311): Process ended prematurely: osmo-stp_10.42.42.5(pid=18311) [trial-2389↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18311)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 12:07:31.130152 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:07:31.144830 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 12:07:31.351974 tst cs_paging_gprs_active.py: using LAC 33834 12:07:31.496518 tst cs_paging_gprs_active.py: using RAC 174 12:07:31.645376 tst cs_paging_gprs_active.py: using CellId 33834 12:07:31.811231 tst cs_paging_gprs_active.py: using BVCI 33835 12:07:31.846689 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:07:31.864472 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:07:31.880599 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:07:31.897387 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:07:31.914129 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:07:31.927985 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:07:31.948768 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:07:31.969696 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:07:31.987072 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:07:32.110471 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:07:32.422553 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:07:32.563633 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:07:32.908922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18301): Launched 12:07:33.197853 run iperf3-srv_10.42.42.10(pid=18302): Launched 12:07:33.403157 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:07:33.543148 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:07:33.890846 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18303): Launched 12:07:34.178720 run iperf3-srv_10.42.42.10(pid=18304): Launched 12:07:34.383129 tst cs_paging_gprs_active.py:38: start network... 12:07:34.522692 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:07:35.046475 run create_hlr_db(pid=18305): Launched 12:07:35.239688 bus /gobi_6: Setting Powered False 12:07:36.258676 run create_hlr_db(pid=18305): Terminated: ok {rc=0} 12:07:36.701891 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18307): Launched 12:07:37.036702 run osmo-hlr_10.42.42.2(pid=18308): Launched 12:07:37.159029 run osmo-stp_10.42.42.5: Starting osmo-stp 12:07:37.738950 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18310): Launched 12:07:38.072761 run osmo-stp_10.42.42.5(pid=18311): Launched 12:07:38.193941 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:07:38.773479 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18313): Launched 12:07:38.891587 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:07:39.183347 run patchelf(pid=18314): Launched 12:07:39.377369 run osmo-stp_10.42.42.5(pid=18311): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18311)] 12:07:39.520040 run osmo-stp_10.42.42.5(pid=18311): stdout: | (launched: 2022-12-13_12:07:37.907611) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:07:39.662655 run osmo-stp_10.42.42.5(pid=18311): stderr: | �[0;m�[38;5;43m20221213120738099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213120738099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213120738099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213120738099 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213120738100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213120738100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213120738100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:07:39.799436 run osmo-stp_10.42.42.5(pid=18311): stdout: | (launched: 2022-12-13_12:07:37.907611) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:07:39.935050 run osmo-stp_10.42.42.5(pid=18311): stderr: | �[0;m�[38;5;43m20221213120738099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213120738099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213120738099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213120738099 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213120738100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213120738100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213120738100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:07:40.093419 run patchelf(pid=18314): Terminating (SIGINT) 12:07:40.278900 run patchelf(pid=18314): Terminated: ok {rc=0} 12:07:40.312779 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18311): Process ended prematurely: osmo-stp_10.42.42.5(pid=18311) [trial-2389↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18311)] [trial-2389↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 12:07:40.322922 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 12:07:40.386609 run osmo-hlr_10.42.42.2(pid=18308): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18308)] 12:07:40.438499 run osmo-hlr_10.42.42.2(pid=18308): stdout: | (launched: 2022-12-13_12:07:36.870785) 12:07:40.491582 run osmo-hlr_10.42.42.2(pid=18308): stderr: | �[0;m�[1;31m20221213120737069 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213120737070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213120737070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213120737070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213120737070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213120737070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213120737082 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213120737090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213120737090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213120737090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:07:40.536660 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18301): Terminating (SIGTERM) 12:07:40.579431 run iperf3-srv_10.42.42.10(pid=18302): Terminating (SIGTERM) 12:07:40.621824 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18303): Terminating (SIGTERM) 12:07:40.664318 run iperf3-srv_10.42.42.10(pid=18304): Terminating (SIGTERM) 12:07:40.706636 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18307): Terminating (SIGTERM) 12:07:40.748906 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18310): Terminating (SIGTERM) 12:07:40.791090 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18313): Terminating (SIGTERM) 12:07:40.800757 --- ParallelTerminationStrategy: PID 18301 died... 12:07:40.857507 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18301): Terminated: ok {rc=0} 12:07:40.867468 --- ParallelTerminationStrategy: PID 18302 died... 12:07:40.923901 run iperf3-srv_10.42.42.10(pid=18302): Terminated {rc=256} 12:07:40.933891 --- ParallelTerminationStrategy: PID 18303 died... 12:07:40.990047 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18303): Terminated: ok {rc=0} 12:07:40.999996 --- ParallelTerminationStrategy: PID 18304 died... 12:07:41.056143 run iperf3-srv_10.42.42.10(pid=18304): Terminated {rc=256} 12:07:41.066117 --- ParallelTerminationStrategy: PID 18307 died... 12:07:41.122331 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18307): Terminated: ok {rc=0} 12:07:41.132354 --- ParallelTerminationStrategy: PID 18310 died... 12:07:41.188535 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18310): Terminated: ok {rc=0} 12:07:41.198503 --- ParallelTerminationStrategy: PID 18313 died... 12:07:41.254625 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18313): Terminated: ok {rc=0} 12:07:41.342876 bus /gobi_0: Setting Powered False 12:07:42.449473 bus /gobi_0: Setting Powered False 12:07:43.557624 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18311): Process ended prematurely: osmo-stp_10.42.42.5(pid=18311) [trial-2389↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18311)]