Failed
gprs:trx-sysmocell5000.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000)
Stacktrace
osmo-stp_10.42.42.5(pid=18095): Process ended prematurely: osmo-stp_10.42.42.5(pid=18095) [trial-2389↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18095)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-sysmocell5000 cs_paging_gprs_active.py ---------------------------------------------- 12:04:28.700022 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 12:04:28.710865 tst gprs:trx-sysmocell5000: Using 1 x bts (candidates: 1) 12:04:28.853080 tst cs_paging_gprs_active.py: using LAC 33819 12:04:28.973946 tst cs_paging_gprs_active.py: using RAC 159 12:04:29.093788 tst cs_paging_gprs_active.py: using CellId 33819 12:04:29.218244 tst cs_paging_gprs_active.py: using BVCI 33820 12:04:29.241827 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 12:04:29.252686 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 12:04:29.263400 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 12:04:29.274150 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 12:04:29.284722 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 12:04:29.295318 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 12:04:29.306089 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 12:04:29.316551 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 12:04:29.327390 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 12:04:29.448721 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 12:04:29.749813 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:04:29.888722 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:04:30.234176 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18085): Launched 12:04:30.521015 run iperf3-srv_10.42.42.10(pid=18086): Launched 12:04:30.725531 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:04:30.881222 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:04:31.225136 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18087): Launched 12:04:31.515151 run iperf3-srv_10.42.42.10(pid=18088): Launched 12:04:31.710602 tst cs_paging_gprs_active.py:38: start network... 12:04:31.844769 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:04:32.354610 run create_hlr_db(pid=18089): Launched 12:04:32.533559 bus /sierra_2: Setting Powered False 12:04:33.554518 run create_hlr_db(pid=18089): Terminated: ok {rc=0} 12:04:33.968436 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18091): Launched 12:04:34.279343 run osmo-hlr_10.42.42.2(pid=18092): Launched 12:04:34.399355 run osmo-stp_10.42.42.5: Starting osmo-stp 12:04:34.943158 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18094): Launched 12:04:35.254280 run osmo-stp_10.42.42.5(pid=18095): Launched 12:04:35.366030 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:04:35.908539 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18097): Launched 12:04:36.018455 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:04:36.292091 run patchelf(pid=18098): Launched 12:04:36.473674 run osmo-stp_10.42.42.5(pid=18095): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18095)] 12:04:36.606217 run osmo-stp_10.42.42.5(pid=18095): stdout: | (launched: 2022-12-13_12:04:35.101612) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:04:36.739034 run osmo-stp_10.42.42.5(pid=18095): stderr: | �[0;m�[38;5;43m20221213120435273 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213120435273 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213120435273 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213120435274 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213120435274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213120435274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213120435274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:04:36.867120 run osmo-stp_10.42.42.5(pid=18095): stdout: | (launched: 2022-12-13_12:04:35.101612) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:04:36.994092 run osmo-stp_10.42.42.5(pid=18095): stderr: | �[0;m�[38;5;43m20221213120435273 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213120435273 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213120435273 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213120435274 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213120435274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213120435274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213120435274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:04:37.142606 run patchelf(pid=18098): Terminating (SIGINT) 12:04:37.316223 run patchelf(pid=18098): Terminated: ok {rc=0} 12:04:37.348256 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18095): Process ended prematurely: osmo-stp_10.42.42.5(pid=18095) [trial-2389↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18095)] [trial-2389↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38] 12:04:37.357678 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 12:04:37.417700 run osmo-hlr_10.42.42.2(pid=18092): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18092)] 12:04:37.466664 run osmo-hlr_10.42.42.2(pid=18092): stdout: | (launched: 2022-12-13_12:04:34.126453) 12:04:37.516535 run osmo-hlr_10.42.42.2(pid=18092): stderr: | �[0;m�[1;31m20221213120434307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213120434307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213120434307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213120434307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213120434307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213120434307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213120434319 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-sysmocell5000/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213120434328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213120434329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213120434329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:04:37.559103 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18085): Terminating (SIGTERM) 12:04:37.598995 run iperf3-srv_10.42.42.10(pid=18086): Terminating (SIGTERM) 12:04:37.644721 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18087): Terminating (SIGTERM) 12:04:37.687213 run iperf3-srv_10.42.42.10(pid=18088): Terminating (SIGTERM) 12:04:37.729823 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18091): Terminating (SIGTERM) 12:04:37.772335 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18094): Terminating (SIGTERM) 12:04:37.815224 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18097): Terminating (SIGTERM) 12:04:37.824932 --- ParallelTerminationStrategy: PID 18085 died... 12:04:37.881932 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18085): Terminated: ok {rc=0} 12:04:37.892067 --- ParallelTerminationStrategy: PID 18086 died... 12:04:37.948427 run iperf3-srv_10.42.42.10(pid=18086): Terminated {rc=256} 12:04:37.958556 --- ParallelTerminationStrategy: PID 18087 died... 12:04:38.015165 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18087): Terminated: ok {rc=0} 12:04:38.025364 --- ParallelTerminationStrategy: PID 18088 died... 12:04:38.081927 run iperf3-srv_10.42.42.10(pid=18088): Terminated {rc=256} 12:04:38.091927 --- ParallelTerminationStrategy: PID 18091 died... 12:04:38.148455 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18091): Terminated: ok {rc=0} 12:04:38.158535 --- ParallelTerminationStrategy: PID 18094 died... 12:04:38.215499 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18094): Terminated: ok {rc=0} 12:04:38.225884 --- ParallelTerminationStrategy: PID 18097 died... 12:04:38.282922 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18097): Terminated: ok {rc=0} 12:04:38.370795 bus /gobi_0: Setting Powered False 12:04:39.473228 bus /gobi_0: Setting Powered False 12:04:40.580771 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18095): Process ended prematurely: osmo-stp_10.42.42.5(pid=18095) [trial-2389↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18095)]