Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=30407): Process ended prematurely: osmo-stp_10.42.42.5(pid=30407) [trial-2390↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30407)]
Standard Output
---------------------------------------------- trial-2390 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 14:14:02.933908 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:02.945336 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 14:14:03.081958 tst cs_paging_gprs_active.py: using LAC 34499 14:14:03.201900 tst cs_paging_gprs_active.py: using RAC 74 14:14:03.322199 tst cs_paging_gprs_active.py: using CellId 34499 14:14:03.444633 tst cs_paging_gprs_active.py: using BVCI 34500 14:14:03.468285 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:03.479673 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:03.490941 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:03.502236 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:03.514037 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:03.525780 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:03.537768 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:03.549484 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:03.561499 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 14:14:03.684884 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 14:14:03.969648 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 14:14:04.097344 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:14:04.416361 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30397): Launched 14:14:04.682707 run iperf3-srv_10.42.42.10(pid=30398): Launched 14:14:04.869496 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 14:14:04.997181 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:14:05.316546 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30399): Launched 14:14:05.582995 run iperf3-srv_10.42.42.10(pid=30400): Launched 14:14:05.772294 tst cs_paging_gprs_active.py:38: start network... 14:14:05.901750 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:14:06.403493 run create_hlr_db(pid=30401): Launched 14:14:06.580676 bus /gobi_6: Setting Powered False 14:14:07.602480 run create_hlr_db(pid=30401): Terminated: ok {rc=0} 14:14:08.014205 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30403): Launched 14:14:08.322340 run osmo-hlr_10.42.42.2(pid=30404): Launched 14:14:08.439895 run osmo-stp_10.42.42.5: Starting osmo-stp 14:14:08.975941 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30406): Launched 14:14:09.284659 run osmo-stp_10.42.42.5(pid=30407): Launched 14:14:09.396187 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:14:09.932597 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30409): Launched 14:14:10.042132 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:14:10.312923 run patchelf(pid=30410): Launched 14:14:10.492204 run osmo-stp_10.42.42.5(pid=30407): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30407)] 14:14:10.623791 run osmo-stp_10.42.42.5(pid=30407): stdout: | (launched: 2022-12-13_14:14:09.132614) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:14:10.756578 run osmo-stp_10.42.42.5(pid=30407): stderr: | �[0;m�[38;5;43m20221213141409303 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213141409303 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213141409303 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213141409304 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213141409304 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213141409304 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213141409304 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:14:10.883796 run osmo-stp_10.42.42.5(pid=30407): stdout: | (launched: 2022-12-13_14:14:09.132614) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:14:11.009427 run osmo-stp_10.42.42.5(pid=30407): stderr: | �[0;m�[38;5;43m20221213141409303 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213141409303 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213141409303 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213141409304 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213141409304 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213141409304 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213141409304 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:14:11.155663 run patchelf(pid=30410): Terminating (SIGINT) 14:14:11.328242 run patchelf(pid=30410): Terminated: ok {rc=0} 14:14:11.360009 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30407): Process ended prematurely: osmo-stp_10.42.42.5(pid=30407) [trial-2390↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30407)] [trial-2390↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 14:14:11.369414 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 14:14:11.429098 run osmo-hlr_10.42.42.2(pid=30404): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30404)] 14:14:11.478075 run osmo-hlr_10.42.42.2(pid=30404): stdout: | (launched: 2022-12-13_14:14:08.170255) 14:14:11.528045 run osmo-hlr_10.42.42.2(pid=30404): stderr: | �[0;m�[1;31m20221213141408346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213141408346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213141408346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213141408346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213141408346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213141408346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213141408359 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213141408367 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213141408367 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213141408367 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:14:11.570186 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30397): Terminating (SIGTERM) 14:14:11.610572 run iperf3-srv_10.42.42.10(pid=30398): Terminating (SIGTERM) 14:14:11.650488 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30399): Terminating (SIGTERM) 14:14:11.690743 run iperf3-srv_10.42.42.10(pid=30400): Terminating (SIGTERM) 14:14:11.730779 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30403): Terminating (SIGTERM) 14:14:11.771287 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30406): Terminating (SIGTERM) 14:14:11.811515 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30409): Terminating (SIGTERM) 14:14:11.820772 --- ParallelTerminationStrategy: PID 30397 died... 14:14:11.873949 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30397): Terminated: ok {rc=0} 14:14:11.883831 --- ParallelTerminationStrategy: PID 30398 died... 14:14:11.937455 run iperf3-srv_10.42.42.10(pid=30398): Terminated {rc=256} 14:14:11.947101 --- ParallelTerminationStrategy: PID 30399 died... 14:14:11.999871 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30399): Terminated: ok {rc=0} 14:14:12.009307 --- ParallelTerminationStrategy: PID 30400 died... 14:14:12.062105 run iperf3-srv_10.42.42.10(pid=30400): Terminated {rc=256} 14:14:12.071657 --- ParallelTerminationStrategy: PID 30403 died... 14:14:12.124515 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30403): Terminated: ok {rc=0} 14:14:12.134076 --- ParallelTerminationStrategy: PID 30406 died... 14:14:12.186990 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30406): Terminated: ok {rc=0} 14:14:12.196514 --- ParallelTerminationStrategy: PID 30409 died... 14:14:12.249303 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30409): Terminated: ok {rc=0} 14:14:12.337937 bus /gobi_0: Setting Powered False 14:14:13.441072 bus /gobi_0: Setting Powered False 14:14:14.552937 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30407): Process ended prematurely: osmo-stp_10.42.42.5(pid=30407) [trial-2390↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30407)]