Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=25232): Process ended prematurely: osmo-stp_10.42.42.5(pid=25232) [trial-2390↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25232)]
Standard Output
---------------------------------------------- trial-2390 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:15:57.397048 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:15:57.407543 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:15:57.532561 tst cs_paging_gprs_active.py: using LAC 34192 13:15:57.653793 tst cs_paging_gprs_active.py: using RAC 22 13:15:57.781360 tst cs_paging_gprs_active.py: using CellId 34192 13:15:57.910771 tst cs_paging_gprs_active.py: using BVCI 34193 13:15:57.936014 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:15:57.947464 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:15:57.958629 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:15:57.969629 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:15:57.981063 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:15:57.992178 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:15:58.003821 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:15:58.015161 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:15:58.026706 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:15:58.144776 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:15:58.429069 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:15:58.555856 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:15:58.871391 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25222): Launched 13:15:59.135442 run iperf3-srv_10.42.42.10(pid=25223): Launched 13:15:59.319356 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:15:59.445222 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:15:59.759975 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25224): Launched 13:16:00.021532 run iperf3-srv_10.42.42.10(pid=25225): Launched 13:16:00.206689 tst cs_paging_gprs_active.py:38: start network... 13:16:00.333272 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:16:00.825353 run create_hlr_db(pid=25226): Launched 13:16:01.044588 bus /gobi_6: Setting Powered False 13:16:02.092107 run create_hlr_db(pid=25226): Terminated: ok {rc=0} 13:16:02.530786 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25228): Launched 13:16:02.834039 run osmo-hlr_10.42.42.2(pid=25229): Launched 13:16:02.954526 run osmo-stp_10.42.42.5: Starting osmo-stp 13:16:03.489516 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25231): Launched 13:16:03.793335 run osmo-stp_10.42.42.5(pid=25232): Launched 13:16:03.903440 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:16:04.432706 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25234): Launched 13:16:04.540624 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:16:04.805306 run patchelf(pid=25235): Launched 13:16:04.982383 run osmo-stp_10.42.42.5(pid=25232): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25232)] 13:16:05.112443 run osmo-stp_10.42.42.5(pid=25232): stdout: | (launched: 2022-12-13_13:16:03.643759) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:16:05.242113 run osmo-stp_10.42.42.5(pid=25232): stderr: | �[0;m�[38;5;43m20221213131603811 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213131603811 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213131603811 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213131603812 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213131603812 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213131603812 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213131603812 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:16:05.366735 run osmo-stp_10.42.42.5(pid=25232): stdout: | (launched: 2022-12-13_13:16:03.643759) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:16:05.490204 run osmo-stp_10.42.42.5(pid=25232): stderr: | �[0;m�[38;5;43m20221213131603811 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213131603811 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213131603811 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213131603812 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213131603812 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213131603812 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213131603812 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:16:05.634892 run patchelf(pid=25235): Terminating (SIGINT) 13:16:05.804888 run patchelf(pid=25235): Terminated: ok {rc=0} 13:16:05.836301 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25232): Process ended prematurely: osmo-stp_10.42.42.5(pid=25232) [trial-2390↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25232)] [trial-2390↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:16:05.845519 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 13:16:05.905015 run osmo-hlr_10.42.42.2(pid=25229): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25229)] 13:16:05.953711 run osmo-hlr_10.42.42.2(pid=25229): stdout: | (launched: 2022-12-13_13:16:02.685245) 13:16:06.003189 run osmo-hlr_10.42.42.2(pid=25229): stderr: | �[0;m�[1;31m20221213131602860 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213131602860 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213131602860 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213131602860 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213131602860 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213131602860 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213131602873 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213131602881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213131602882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213131602882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:16:06.045193 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25222): Terminating (SIGTERM) 13:16:06.084691 run iperf3-srv_10.42.42.10(pid=25223): Terminating (SIGTERM) 13:16:06.124364 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25224): Terminating (SIGTERM) 13:16:06.163796 run iperf3-srv_10.42.42.10(pid=25225): Terminating (SIGTERM) 13:16:06.203403 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25228): Terminating (SIGTERM) 13:16:06.242923 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25231): Terminating (SIGTERM) 13:16:06.282523 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25234): Terminating (SIGTERM) 13:16:06.291535 --- ParallelTerminationStrategy: PID 25222 died... 13:16:06.344444 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25222): Terminated: ok {rc=0} 13:16:06.353885 --- ParallelTerminationStrategy: PID 25223 died... 13:16:06.406096 run iperf3-srv_10.42.42.10(pid=25223): Terminated {rc=256} 13:16:06.415382 --- ParallelTerminationStrategy: PID 25224 died... 13:16:06.467551 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25224): Terminated: ok {rc=0} 13:16:06.476802 --- ParallelTerminationStrategy: PID 25225 died... 13:16:06.529178 run iperf3-srv_10.42.42.10(pid=25225): Terminated {rc=256} 13:16:06.538500 --- ParallelTerminationStrategy: PID 25228 died... 13:16:06.590936 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25228): Terminated: ok {rc=0} 13:16:06.600270 --- ParallelTerminationStrategy: PID 25231 died... 13:16:06.652862 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25231): Terminated: ok {rc=0} 13:16:06.662327 --- ParallelTerminationStrategy: PID 25234 died... 13:16:06.715212 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25234): Terminated: ok {rc=0} 13:16:06.803420 bus /gobi_0: Setting Powered False 13:16:07.908132 bus /gobi_0: Setting Powered False 13:16:09.015986 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25232): Process ended prematurely: osmo-stp_10.42.42.5(pid=25232) [trial-2390↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25232)]