Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=24820): Process ended prematurely: osmo-stp_10.42.42.5(pid=24820) [trial-2390↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24820)]
Standard Output
---------------------------------------------- trial-2390 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 13:10:04.803747 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:04.815237 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:10:04.976715 tst cs_paging_gprs_active.py: using LAC 34160 13:10:05.110852 tst cs_paging_gprs_active.py: using RAC 245 13:10:05.241672 tst cs_paging_gprs_active.py: using CellId 34160 13:10:05.371459 tst cs_paging_gprs_active.py: using BVCI 34161 13:10:05.397404 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:05.408737 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:05.419961 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:05.431153 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:05.442648 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:05.454174 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:05.465805 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:05.477340 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:05.489139 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:10:05.609012 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:10:05.915183 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:10:06.056038 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:10:06.407505 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24810): Launched 13:10:06.697531 run iperf3-srv_10.42.42.10(pid=24811): Launched 13:10:06.902510 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:10:07.042508 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:10:07.390196 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24812): Launched 13:10:07.681503 run iperf3-srv_10.42.42.10(pid=24813): Launched 13:10:07.886686 tst cs_paging_gprs_active.py:38: start network... 13:10:08.026653 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:10:08.558729 run create_hlr_db(pid=24814): Launched 13:10:08.752362 bus /gobi_6: Setting Powered False 13:10:09.773504 run create_hlr_db(pid=24814): Terminated: ok {rc=0} 13:10:10.195533 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24816): Launched 13:10:10.511972 run osmo-hlr_10.42.42.2(pid=24817): Launched 13:10:10.635478 run osmo-stp_10.42.42.5: Starting osmo-stp 13:10:11.189417 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24819): Launched 13:10:11.504318 run osmo-stp_10.42.42.5(pid=24820): Launched 13:10:11.619130 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:10:12.166811 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24822): Launched 13:10:12.279261 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:10:12.554769 run patchelf(pid=24823): Launched 13:10:12.737502 run osmo-stp_10.42.42.5(pid=24820): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24820)] 13:10:12.870708 run osmo-stp_10.42.42.5(pid=24820): stdout: | (launched: 2022-12-13_13:10:11.348443) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:10:13.004025 run osmo-stp_10.42.42.5(pid=24820): stderr: | �[0;m�[38;5;43m20221213131011523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213131011523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213131011523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213131011523 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213131011524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213131011524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213131011524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:10:13.132775 run osmo-stp_10.42.42.5(pid=24820): stdout: | (launched: 2022-12-13_13:10:11.348443) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:10:13.260661 run osmo-stp_10.42.42.5(pid=24820): stderr: | �[0;m�[38;5;43m20221213131011523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213131011523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213131011523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213131011523 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213131011524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213131011524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213131011524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:10:13.410198 run patchelf(pid=24823): Terminating (SIGINT) 13:10:13.585971 run patchelf(pid=24823): Terminated: ok {rc=0} 13:10:13.618242 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24820): Process ended prematurely: osmo-stp_10.42.42.5(pid=24820) [trial-2390↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24820)] [trial-2390↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 13:10:13.627472 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 13:10:13.687837 run osmo-hlr_10.42.42.2(pid=24817): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24817)] 13:10:13.737120 run osmo-hlr_10.42.42.2(pid=24817): stdout: | (launched: 2022-12-13_13:10:10.355660) 13:10:13.786885 run osmo-hlr_10.42.42.2(pid=24817): stderr: | �[0;m�[1;31m20221213131010537 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213131010537 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213131010538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213131010538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213131010538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213131010538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213131010551 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213131010562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213131010562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213131010562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:10:13.829811 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24810): Terminating (SIGTERM) 13:10:13.870068 run iperf3-srv_10.42.42.10(pid=24811): Terminating (SIGTERM) 13:10:13.910462 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24812): Terminating (SIGTERM) 13:10:13.950594 run iperf3-srv_10.42.42.10(pid=24813): Terminating (SIGTERM) 13:10:13.990704 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24816): Terminating (SIGTERM) 13:10:14.030866 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24819): Terminating (SIGTERM) 13:10:14.071009 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24822): Terminating (SIGTERM) 13:10:14.080288 --- ParallelTerminationStrategy: PID 24810 died... 13:10:14.134173 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24810): Terminated: ok {rc=0} 13:10:14.143732 --- ParallelTerminationStrategy: PID 24811 died... 13:10:14.196928 run iperf3-srv_10.42.42.10(pid=24811): Terminated {rc=256} 13:10:14.206519 --- ParallelTerminationStrategy: PID 24812 died... 13:10:14.260808 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24812): Terminated: ok {rc=0} 13:10:14.270422 --- ParallelTerminationStrategy: PID 24813 died... 13:10:14.323970 run iperf3-srv_10.42.42.10(pid=24813): Terminated {rc=256} 13:10:14.333610 --- ParallelTerminationStrategy: PID 24816 died... 13:10:14.387176 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24816): Terminated: ok {rc=0} 13:10:14.396728 --- ParallelTerminationStrategy: PID 24819 died... 13:10:14.450032 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24819): Terminated: ok {rc=0} 13:10:14.459644 --- ParallelTerminationStrategy: PID 24822 died... 13:10:14.513107 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24822): Terminated: ok {rc=0} 13:10:14.602064 bus /gobi_0: Setting Powered False 13:10:15.706933 bus /gobi_0: Setting Powered False 13:10:16.814832 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24820): Process ended prematurely: osmo-stp_10.42.42.5(pid=24820) [trial-2390↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24820)]