Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=24873): Process ended prematurely: osmo-stp_10.42.42.5(pid=24873) [trial-2390↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24873)]
Standard Output
---------------------------------------------- trial-2390 gprs:sysmo+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 13:10:56.168183 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:56.180286 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:10:56.338064 tst ping_idle_ping.py: using LAC 34164 13:10:56.469759 tst ping_idle_ping.py: using RAC 249 13:10:56.601189 tst ping_idle_ping.py: using CellId 34164 13:10:56.732414 tst ping_idle_ping.py: using BVCI 34165 13:10:56.757880 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:56.769455 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:56.780724 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:56.792065 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:56.803650 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:56.815642 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:56.827588 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:10:56.839276 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:10:57.122620 tst ping_idle_ping.py:24: start network... 13:10:57.251014 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:10:57.749514 run create_hlr_db(pid=24867): Launched 13:10:57.929911 bus /gobi_6: Setting Powered False 13:10:58.948033 run create_hlr_db(pid=24867): Terminated: ok {rc=0} 13:10:59.360643 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24869): Launched 13:10:59.672823 run osmo-hlr_10.42.42.2(pid=24870): Launched 13:10:59.786138 run osmo-stp_10.42.42.5: Starting osmo-stp 13:11:00.326999 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24872): Launched 13:11:00.636787 run osmo-stp_10.42.42.5(pid=24873): Launched 13:11:00.749143 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:11:01.336034 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24875): Launched 13:11:01.447959 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:11:01.739350 run patchelf(pid=24876): Launched 13:11:01.923216 run osmo-stp_10.42.42.5(pid=24873): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24873)] 13:11:02.059469 run osmo-stp_10.42.42.5(pid=24873): stdout: | (launched: 2022-12-13_13:11:00.482666) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:11:02.194458 run osmo-stp_10.42.42.5(pid=24873): stderr: | �[0;m�[38;5;43m20221213131100658 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213131100658 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213131100659 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213131100659 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213131100660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213131100660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213131100660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:11:02.322425 run osmo-stp_10.42.42.5(pid=24873): stdout: | (launched: 2022-12-13_13:11:00.482666) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:11:02.448005 run osmo-stp_10.42.42.5(pid=24873): stderr: | �[0;m�[38;5;43m20221213131100658 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213131100658 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213131100659 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213131100659 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213131100660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213131100660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213131100660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:11:02.595041 run patchelf(pid=24876): Terminating (SIGINT) 13:11:02.768692 run patchelf(pid=24876): Terminated: ok {rc=0} 13:11:02.800288 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=24873): Process ended prematurely: osmo-stp_10.42.42.5(pid=24873) [trial-2390↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24873)] [trial-2390↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 13:11:02.808943 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 13:11:02.869435 run osmo-hlr_10.42.42.2(pid=24870): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24870)] 13:11:02.918917 run osmo-hlr_10.42.42.2(pid=24870): stdout: | (launched: 2022-12-13_13:10:59.518500) 13:11:02.969528 run osmo-hlr_10.42.42.2(pid=24870): stderr: | �[0;m�[1;31m20221213131059700 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213131059700 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213131059700 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213131059700 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213131059700 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213131059700 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213131059712 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:sysmo+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213131059721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213131059721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213131059721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:11:03.012426 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24869): Terminating (SIGTERM) 13:11:03.052710 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24872): Terminating (SIGTERM) 13:11:03.093232 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24875): Terminating (SIGTERM) 13:11:03.102630 --- ParallelTerminationStrategy: PID 24869 died... 13:11:03.156859 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24869): Terminated: ok {rc=0} 13:11:03.166672 --- ParallelTerminationStrategy: PID 24872 died... 13:11:03.220515 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24872): Terminated: ok {rc=0} 13:11:03.230380 --- ParallelTerminationStrategy: PID 24875 died... 13:11:03.284139 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24875): Terminated: ok {rc=0} 13:11:03.373792 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24873): Process ended prematurely: osmo-stp_10.42.42.5(pid=24873) [trial-2390↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24873)]