Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28231): Process ended prematurely: osmo-stp_10.42.42.5(pid=28231) [trial-2390↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28231)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:50:44.363637 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:50:44.375174 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:50:44.522484 tst cs_paging_gprs_active.py: using LAC 34376 13:50:44.650164 tst cs_paging_gprs_active.py: using RAC 206 13:50:44.778792 tst cs_paging_gprs_active.py: using CellId 34376 13:50:44.908259 tst cs_paging_gprs_active.py: using BVCI 34377 13:50:44.933122 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:50:44.944434 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:50:44.955589 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:50:44.966853 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:50:44.978295 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:50:44.989790 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:50:45.001549 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:50:45.013220 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:50:45.025218 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:50:45.142533 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:50:45.439876 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:50:45.577258 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:50:45.948624 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28221): Launched 13:50:46.247308 run iperf3-srv_10.42.42.10(pid=28222): Launched 13:50:46.450947 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:50:46.591027 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:50:46.995176 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28223): Launched 13:50:47.312108 run iperf3-srv_10.42.42.10(pid=28224): Launched 13:50:47.495629 tst cs_paging_gprs_active.py:38: start network... 13:50:47.622348 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:50:48.109876 run create_hlr_db(pid=28225): Launched 13:50:48.283959 bus /gobi_6: Setting Powered False 13:50:49.304776 run create_hlr_db(pid=28225): Terminated: ok {rc=0} 13:50:49.736104 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28227): Launched 13:50:50.062323 run osmo-hlr_10.42.42.2(pid=28228): Launched 13:50:50.180118 run osmo-stp_10.42.42.5: Starting osmo-stp 13:50:50.743062 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28230): Launched 13:50:51.067372 run osmo-stp_10.42.42.5(pid=28231): Launched 13:50:51.185413 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:50:51.753781 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28233): Launched 13:50:51.871819 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:50:52.156802 run patchelf(pid=28240): Launched 13:50:52.347782 run osmo-stp_10.42.42.5(pid=28231): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28231)] 13:50:52.486517 run osmo-stp_10.42.42.5(pid=28231): stdout: | (launched: 2022-12-13_13:50:50.907227) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:50:52.625925 run osmo-stp_10.42.42.5(pid=28231): stderr: | �[0;m�[38;5;43m20221213135051098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213135051098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213135051098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213135051099 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213135051099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213135051099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213135051099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:50:52.760044 run osmo-stp_10.42.42.5(pid=28231): stdout: | (launched: 2022-12-13_13:50:50.907227) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:50:52.893127 run osmo-stp_10.42.42.5(pid=28231): stderr: | �[0;m�[38;5;43m20221213135051098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213135051098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213135051098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213135051099 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213135051099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213135051099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213135051099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:50:53.048018 run patchelf(pid=28240): Terminating (SIGINT) 13:50:53.230328 run patchelf(pid=28240): Terminated: ok {rc=0} 13:50:53.263893 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28231): Process ended prematurely: osmo-stp_10.42.42.5(pid=28231) [trial-2390↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28231)] [trial-2390↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:50:53.273915 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 13:50:53.337025 run osmo-hlr_10.42.42.2(pid=28228): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28228)] 13:50:53.388048 run osmo-hlr_10.42.42.2(pid=28228): stdout: | (launched: 2022-12-13_13:50:49.901117) 13:50:53.439899 run osmo-hlr_10.42.42.2(pid=28228): stderr: | �[0;m�[1;31m20221213135050100 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213135050100 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213135050100 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213135050100 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213135050100 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213135050100 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213135050112 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213135050121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213135050121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213135050121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:50:53.484273 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28221): Terminating (SIGTERM) 13:50:53.526211 run iperf3-srv_10.42.42.10(pid=28222): Terminating (SIGTERM) 13:50:53.568108 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28223): Terminating (SIGTERM) 13:50:53.609933 run iperf3-srv_10.42.42.10(pid=28224): Terminating (SIGTERM) 13:50:53.652109 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28227): Terminating (SIGTERM) 13:50:53.693794 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28230): Terminating (SIGTERM) 13:50:53.735897 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28233): Terminating (SIGTERM) 13:50:53.745546 --- ParallelTerminationStrategy: PID 28221 died... 13:50:53.801346 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28221): Terminated: ok {rc=0} 13:50:53.811301 --- ParallelTerminationStrategy: PID 28222 died... 13:50:53.866827 run iperf3-srv_10.42.42.10(pid=28222): Terminated {rc=256} 13:50:53.876752 --- ParallelTerminationStrategy: PID 28223 died... 13:50:53.932516 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28223): Terminated: ok {rc=0} 13:50:53.942476 --- ParallelTerminationStrategy: PID 28224 died... 13:50:53.998117 run iperf3-srv_10.42.42.10(pid=28224): Terminated {rc=256} 13:50:54.008054 --- ParallelTerminationStrategy: PID 28227 died... 13:50:54.063655 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28227): Terminated: ok {rc=0} 13:50:54.073696 --- ParallelTerminationStrategy: PID 28230 died... 13:50:54.129481 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28230): Terminated: ok {rc=0} 13:50:54.139466 --- ParallelTerminationStrategy: PID 28233 died... 13:50:54.195307 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28233): Terminated: ok {rc=0} 13:50:54.281587 bus /gobi_0: Setting Powered False 13:50:55.387284 bus /gobi_0: Setting Powered False 13:50:56.494935 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28231): Process ended prematurely: osmo-stp_10.42.42.5(pid=28231) [trial-2390↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28231)]