Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=7595): Process ended prematurely: osmo-stp_10.42.42.5(pid=7595) [trial-2391↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7595)]
Standard Output
---------------------------------------------- trial-2391 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 16:48:43.139964 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:48:43.151308 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 16:48:43.299274 tst cs_paging_gprs_active.py: using LAC 34945 16:48:43.427802 tst cs_paging_gprs_active.py: using RAC 10 16:48:43.558670 tst cs_paging_gprs_active.py: using CellId 34945 16:48:43.687755 tst cs_paging_gprs_active.py: using BVCI 34946 16:48:43.713484 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:48:43.724715 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:48:43.735765 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:48:43.746883 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:48:43.758668 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:48:43.770103 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:48:43.781663 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:48:43.792859 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:48:43.804397 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 16:48:43.924196 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 16:48:44.228650 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:48:44.369108 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:48:44.716670 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7585): Launched 16:48:45.006535 run iperf3-srv_10.42.42.10(pid=7586): Launched 16:48:45.211381 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:48:45.350688 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:48:45.699390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7587): Launched 16:48:46.023463 run iperf3-srv_10.42.42.10(pid=7588): Launched 16:48:46.233378 tst cs_paging_gprs_active.py:38: start network... 16:48:46.377371 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:48:46.953526 run create_hlr_db(pid=7589): Launched 16:48:47.138615 bus /sierra_2: Setting Powered False 16:48:48.155472 run create_hlr_db(pid=7589): Terminated: ok {rc=0} 16:48:48.573864 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7591): Launched 16:48:48.889601 run osmo-hlr_10.42.42.2(pid=7592): Launched 16:48:49.009342 run osmo-stp_10.42.42.5: Starting osmo-stp 16:48:49.553092 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7594): Launched 16:48:49.868923 run osmo-stp_10.42.42.5(pid=7595): Launched 16:48:49.983199 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:48:50.531295 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7597): Launched 16:48:50.642777 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:48:50.919128 run patchelf(pid=7598): Launched 16:48:51.102583 run osmo-stp_10.42.42.5(pid=7595): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7595)] 16:48:51.236322 run osmo-stp_10.42.42.5(pid=7595): stdout: | (launched: 2022-12-13_16:48:49.712353) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:48:51.370530 run osmo-stp_10.42.42.5(pid=7595): stderr: | �[0;m�[38;5;43m20221213164849885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213164849885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213164849885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213164849886 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213164849886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213164849886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213164849886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:48:51.499825 run osmo-stp_10.42.42.5(pid=7595): stdout: | (launched: 2022-12-13_16:48:49.712353) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:48:51.628274 run osmo-stp_10.42.42.5(pid=7595): stderr: | �[0;m�[38;5;43m20221213164849885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213164849885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213164849885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213164849886 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213164849886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213164849886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213164849886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:48:51.778141 run patchelf(pid=7598): Terminating (SIGINT) 16:48:51.954723 run patchelf(pid=7598): Terminated: ok {rc=0} 16:48:51.987025 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7595): Process ended prematurely: osmo-stp_10.42.42.5(pid=7595) [trial-2391↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7595)] [trial-2391↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 16:48:51.996371 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 16:48:52.056502 run osmo-hlr_10.42.42.2(pid=7592): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7592)] 16:48:52.105560 run osmo-hlr_10.42.42.2(pid=7592): stdout: | (launched: 2022-12-13_16:48:48.733572) 16:48:52.155000 run osmo-hlr_10.42.42.2(pid=7592): stderr: | �[0;m�[1;31m20221213164848918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213164848918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213164848918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213164848918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213164848918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213164848918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213164848930 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213164848939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213164848939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213164848939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:48:52.197476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7585): Terminating (SIGTERM) 16:48:52.237311 run iperf3-srv_10.42.42.10(pid=7586): Terminating (SIGTERM) 16:48:52.277148 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7587): Terminating (SIGTERM) 16:48:52.316932 run iperf3-srv_10.42.42.10(pid=7588): Terminating (SIGTERM) 16:48:52.357360 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7591): Terminating (SIGTERM) 16:48:52.397222 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7594): Terminating (SIGTERM) 16:48:52.437032 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7597): Terminating (SIGTERM) 16:48:52.446051 --- ParallelTerminationStrategy: PID 7585 died... 16:48:52.499301 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7585): Terminated: ok {rc=0} 16:48:52.508938 --- ParallelTerminationStrategy: PID 7586 died... 16:48:52.562210 run iperf3-srv_10.42.42.10(pid=7586): Terminated {rc=256} 16:48:52.571781 --- ParallelTerminationStrategy: PID 7587 died... 16:48:52.625112 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7587): Terminated: ok {rc=0} 16:48:52.634684 --- ParallelTerminationStrategy: PID 7588 died... 16:48:52.687971 run iperf3-srv_10.42.42.10(pid=7588): Terminated {rc=256} 16:48:52.697695 --- ParallelTerminationStrategy: PID 7591 died... 16:48:52.751192 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7591): Terminated: ok {rc=0} 16:48:52.760771 --- ParallelTerminationStrategy: PID 7594 died... 16:48:52.814042 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7594): Terminated: ok {rc=0} 16:48:52.823643 --- ParallelTerminationStrategy: PID 7597 died... 16:48:52.876829 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7597): Terminated: ok {rc=0} 16:48:52.960311 bus /gobi_0: Setting Powered False 16:48:54.067686 bus /gobi_0: Setting Powered False 16:48:55.175964 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7595): Process ended prematurely: osmo-stp_10.42.42.5(pid=7595) [trial-2391↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7595)]