Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=1641): Process ended prematurely: osmo-stp_10.42.42.5(pid=1641) [trial-2391↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1641)]
Standard Output
---------------------------------------------- trial-2391 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 15:45:55.934862 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:45:55.946308 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 15:45:56.104009 tst cs_paging_gprs_active.py: using LAC 34616 15:45:56.236243 tst cs_paging_gprs_active.py: using RAC 191 15:45:56.370951 tst cs_paging_gprs_active.py: using CellId 34616 15:45:56.504426 tst cs_paging_gprs_active.py: using BVCI 34617 15:45:56.530587 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:45:56.542101 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:45:56.553419 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:45:56.564737 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:45:56.575989 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:45:56.587321 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:45:56.598756 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:45:56.609991 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:45:56.621439 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 15:45:56.742219 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 15:45:57.050321 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:45:57.191813 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:45:57.544369 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1631): Launched 15:45:57.836707 run iperf3-srv_10.42.42.10(pid=1632): Launched 15:45:58.044687 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:45:58.185974 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:45:58.538055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1633): Launched 15:45:58.830153 run iperf3-srv_10.42.42.10(pid=1634): Launched 15:45:59.038489 tst cs_paging_gprs_active.py:38: start network... 15:45:59.179766 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:45:59.724114 run create_hlr_db(pid=1635): Launched 15:45:59.920418 bus /gobi_6: Setting Powered False 15:46:00.945192 run create_hlr_db(pid=1635): Terminated: ok {rc=0} 15:46:01.413402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1637): Launched 15:46:01.858483 run osmo-hlr_10.42.42.2(pid=1638): Launched 15:46:02.042477 run osmo-stp_10.42.42.5: Starting osmo-stp 15:46:02.656803 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1640): Launched 15:46:02.999665 run osmo-stp_10.42.42.5(pid=1641): Launched 15:46:03.122879 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:46:03.715421 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1643): Launched 15:46:03.836360 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:46:04.135307 run patchelf(pid=1644): Launched 15:46:04.333322 run osmo-stp_10.42.42.5(pid=1641): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1641)] 15:46:04.478467 run osmo-stp_10.42.42.5(pid=1641): stdout: | (launched: 2022-12-13_15:46:02.829826) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:46:04.623196 run osmo-stp_10.42.42.5(pid=1641): stderr: | �[0;m�[38;5;43m20221213154603024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213154603024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213154603024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213154603025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213154603025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213154603025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213154603025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:46:04.762851 run osmo-stp_10.42.42.5(pid=1641): stdout: | (launched: 2022-12-13_15:46:02.829826) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:46:04.901650 run osmo-stp_10.42.42.5(pid=1641): stderr: | �[0;m�[38;5;43m20221213154603024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213154603024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213154603024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213154603025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213154603025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213154603025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213154603025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:46:05.063650 run patchelf(pid=1644): Terminating (SIGINT) 15:46:05.254444 run patchelf(pid=1644): Terminated: ok {rc=0} 15:46:05.289046 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1641): Process ended prematurely: osmo-stp_10.42.42.5(pid=1641) [trial-2391↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1641)] [trial-2391↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 15:46:05.298985 tst cs_paging_gprs_active.py:38: Test FAILED (9.4 sec) 15:46:05.362728 run osmo-hlr_10.42.42.2(pid=1638): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1638)] 15:46:05.414943 run osmo-hlr_10.42.42.2(pid=1638): stdout: | (launched: 2022-12-13_15:46:01.582738) 15:46:05.467741 run osmo-hlr_10.42.42.2(pid=1638): stderr: | �[0;m�[1;31m20221213154601877 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213154601877 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213154601877 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213154601877 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213154601877 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213154601877 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213154601901 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213154601916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213154601916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213154601928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:46:05.512846 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1631): Terminating (SIGTERM) 15:46:05.555454 run iperf3-srv_10.42.42.10(pid=1632): Terminating (SIGTERM) 15:46:05.598489 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1633): Terminating (SIGTERM) 15:46:05.640752 run iperf3-srv_10.42.42.10(pid=1634): Terminating (SIGTERM) 15:46:05.683806 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1637): Terminating (SIGTERM) 15:46:05.726307 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1640): Terminating (SIGTERM) 15:46:05.768873 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1643): Terminating (SIGTERM) 15:46:05.778742 --- ParallelTerminationStrategy: PID 1631 died... 15:46:05.835328 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1631): Terminated: ok {rc=0} 15:46:05.845489 --- ParallelTerminationStrategy: PID 1632 died... 15:46:05.901804 run iperf3-srv_10.42.42.10(pid=1632): Terminated {rc=256} 15:46:05.911831 --- ParallelTerminationStrategy: PID 1633 died... 15:46:05.968010 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1633): Terminated: ok {rc=0} 15:46:05.978126 --- ParallelTerminationStrategy: PID 1634 died... 15:46:06.034336 run iperf3-srv_10.42.42.10(pid=1634): Terminated {rc=256} 15:46:06.044376 --- ParallelTerminationStrategy: PID 1637 died... 15:46:06.100856 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1637): Terminated: ok {rc=0} 15:46:06.111043 --- ParallelTerminationStrategy: PID 1640 died... 15:46:06.167132 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1640): Terminated: ok {rc=0} 15:46:06.177349 --- ParallelTerminationStrategy: PID 1643 died... 15:46:06.233111 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1643): Terminated: ok {rc=0} 15:46:06.321477 bus /gobi_0: Setting Powered False 15:46:07.428215 bus /gobi_0: Setting Powered False 15:46:08.538051 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1641): Process ended prematurely: osmo-stp_10.42.42.5(pid=1641) [trial-2391↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1641)]