Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=1691): Process ended prematurely: osmo-stp_10.42.42.5(pid=1691) [trial-2391↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1691)]
Standard Output
---------------------------------------------- trial-2391 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 15:46:48.282177 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:46:48.294927 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 15:46:48.443490 tst ping_idle_ping.py: using LAC 34620 15:46:48.565765 tst ping_idle_ping.py: using RAC 195 15:46:48.685512 tst ping_idle_ping.py: using CellId 34620 15:46:48.805901 tst ping_idle_ping.py: using BVCI 34621 15:46:48.829839 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:46:48.840719 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:46:48.851365 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:46:48.862167 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:46:48.873167 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:46:48.884120 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:46:48.895415 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:46:48.906520 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 15:46:49.193908 tst ping_idle_ping.py:24: start network... 15:46:49.323925 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:46:49.821152 run create_hlr_db(pid=1685): Launched 15:46:50.003014 bus /gobi_6: Setting Powered False 15:46:51.023561 run create_hlr_db(pid=1685): Terminated: ok {rc=0} 15:46:51.471730 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1687): Launched 15:46:51.810380 run osmo-hlr_10.42.42.2(pid=1688): Launched 15:46:51.933380 run osmo-stp_10.42.42.5: Starting osmo-stp 15:46:52.516223 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1690): Launched 15:46:52.852752 run osmo-stp_10.42.42.5(pid=1691): Launched 15:46:52.974285 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:46:53.557824 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1693): Launched 15:46:53.676618 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:46:53.971543 run patchelf(pid=1694): Launched 15:46:54.166659 run osmo-stp_10.42.42.5(pid=1691): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1691)] 15:46:54.309135 run osmo-stp_10.42.42.5(pid=1691): stdout: | (launched: 2022-12-13_15:46:52.686556) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:46:54.451956 run osmo-stp_10.42.42.5(pid=1691): stderr: | �[0;m�[38;5;43m20221213154652885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213154652885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213154652885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213154652886 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213154652886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213154652886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213154652886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:46:54.589519 run osmo-stp_10.42.42.5(pid=1691): stdout: | (launched: 2022-12-13_15:46:52.686556) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:46:54.725555 run osmo-stp_10.42.42.5(pid=1691): stderr: | �[0;m�[38;5;43m20221213154652885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213154652885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213154652885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213154652886 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213154652886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213154652886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213154652886 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:46:54.885339 run patchelf(pid=1694): Terminating (SIGINT) 15:46:55.071984 run patchelf(pid=1694): Terminated: ok {rc=0} 15:46:55.105779 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=1691): Process ended prematurely: osmo-stp_10.42.42.5(pid=1691) [trial-2391↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1691)] [trial-2391↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 15:46:55.115306 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 15:46:55.178616 run osmo-hlr_10.42.42.2(pid=1688): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1688)] 15:46:55.230781 run osmo-hlr_10.42.42.2(pid=1688): stdout: | (launched: 2022-12-13_15:46:51.642869) 15:46:55.283404 run osmo-hlr_10.42.42.2(pid=1688): stderr: | �[0;m�[1;31m20221213154651842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213154651842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213154651842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213154651842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213154651842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213154651842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213154651855 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213154651867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213154651867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213154651867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:46:55.328795 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1687): Terminating (SIGTERM) 15:46:55.372200 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1690): Terminating (SIGTERM) 15:46:55.415325 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1693): Terminating (SIGTERM) 15:46:55.425257 --- ParallelTerminationStrategy: PID 1687 died... 15:46:55.482870 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1687): Terminated: ok {rc=0} 15:46:55.493136 --- ParallelTerminationStrategy: PID 1690 died... 15:46:55.550696 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1690): Terminated: ok {rc=0} 15:46:55.561183 --- ParallelTerminationStrategy: PID 1693 died... 15:46:55.618044 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1693): Terminated: ok {rc=0} 15:46:55.706699 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1691): Process ended prematurely: osmo-stp_10.42.42.5(pid=1691) [trial-2391↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1691)]