Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=1708): Process ended prematurely: osmo-stp_10.42.42.5(pid=1708) [trial-2391↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1708)]
Standard Output
---------------------------------------------- trial-2391 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 15:46:57.836470 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:57.848078 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 15:46:58.027690 tst cs_paging_gprs_active.py: using LAC 34621 15:46:58.161734 tst cs_paging_gprs_active.py: using RAC 196 15:46:58.293739 tst cs_paging_gprs_active.py: using CellId 34621 15:46:58.426275 tst cs_paging_gprs_active.py: using BVCI 34622 15:46:58.452274 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:58.463801 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:58.475223 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:58.486652 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:58.498050 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:58.509476 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:58.521009 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:58.532259 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:58.543799 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:46:58.665717 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:46:58.975402 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:46:59.117342 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:46:59.468540 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1698): Launched 15:46:59.763159 run iperf3-srv_10.42.42.10(pid=1699): Launched 15:46:59.971453 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:47:00.113049 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:47:00.464878 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1700): Launched 15:47:00.757806 run iperf3-srv_10.42.42.10(pid=1701): Launched 15:47:00.970616 tst cs_paging_gprs_active.py:38: start network... 15:47:01.114996 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:47:01.680269 run create_hlr_db(pid=1702): Launched 15:47:01.881470 bus /gobi_6: Setting Powered False 15:47:02.895596 run create_hlr_db(pid=1702): Terminated: ok {rc=0} 15:47:03.322083 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1704): Launched 15:47:03.644574 run osmo-hlr_10.42.42.2(pid=1705): Launched 15:47:03.762292 run osmo-stp_10.42.42.5: Starting osmo-stp 15:47:04.315066 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1707): Launched 15:47:04.635674 run osmo-stp_10.42.42.5(pid=1708): Launched 15:47:04.751328 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:47:05.306927 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1710): Launched 15:47:05.419924 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:47:05.700119 run patchelf(pid=1711): Launched 15:47:05.885829 run osmo-stp_10.42.42.5(pid=1708): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1708)] 15:47:06.021542 run osmo-stp_10.42.42.5(pid=1708): stdout: | (launched: 2022-12-13_15:47:04.476380) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:47:06.157397 run osmo-stp_10.42.42.5(pid=1708): stderr: | �[0;m�[38;5;43m20221213154704649 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213154704650 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213154704650 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213154704650 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213154704651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213154704651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213154704651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:47:06.288124 run osmo-stp_10.42.42.5(pid=1708): stdout: | (launched: 2022-12-13_15:47:04.476380) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:47:06.417923 run osmo-stp_10.42.42.5(pid=1708): stderr: | �[0;m�[38;5;43m20221213154704649 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213154704650 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213154704650 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213154704650 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213154704651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213154704651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213154704651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:47:06.569447 run patchelf(pid=1711): Terminating (SIGINT) 15:47:06.747693 run patchelf(pid=1711): Terminated: ok {rc=0} 15:47:06.780199 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1708): Process ended prematurely: osmo-stp_10.42.42.5(pid=1708) [trial-2391↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1708)] [trial-2391↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 15:47:06.789669 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 15:47:06.850987 run osmo-hlr_10.42.42.2(pid=1705): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1705)] 15:47:06.901246 run osmo-hlr_10.42.42.2(pid=1705): stdout: | (launched: 2022-12-13_15:47:03.484379) 15:47:06.952148 run osmo-hlr_10.42.42.2(pid=1705): stderr: | �[0;m�[1;31m20221213154703665 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213154703665 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213154703665 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213154703665 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213154703665 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213154703665 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213154703679 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213154703687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213154703687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213154703687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:47:06.996158 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1698): Terminating (SIGTERM) 15:47:07.036802 run iperf3-srv_10.42.42.10(pid=1699): Terminating (SIGTERM) 15:47:07.077716 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1700): Terminating (SIGTERM) 15:47:07.118521 run iperf3-srv_10.42.42.10(pid=1701): Terminating (SIGTERM) 15:47:07.159297 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1704): Terminating (SIGTERM) 15:47:07.199888 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1707): Terminating (SIGTERM) 15:47:07.240546 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1710): Terminating (SIGTERM) 15:47:07.250029 --- ParallelTerminationStrategy: PID 1698 died... 15:47:07.304722 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1698): Terminated: ok {rc=0} 15:47:07.314462 --- ParallelTerminationStrategy: PID 1699 died... 15:47:07.368696 run iperf3-srv_10.42.42.10(pid=1699): Terminated {rc=256} 15:47:07.378497 --- ParallelTerminationStrategy: PID 1700 died... 15:47:07.433032 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1700): Terminated: ok {rc=0} 15:47:07.442752 --- ParallelTerminationStrategy: PID 1701 died... 15:47:07.496828 run iperf3-srv_10.42.42.10(pid=1701): Terminated {rc=256} 15:47:07.506682 --- ParallelTerminationStrategy: PID 1704 died... 15:47:07.560933 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1704): Terminated: ok {rc=0} 15:47:07.570710 --- ParallelTerminationStrategy: PID 1707 died... 15:47:07.624939 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1707): Terminated: ok {rc=0} 15:47:07.634618 --- ParallelTerminationStrategy: PID 1710 died... 15:47:07.689028 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1710): Terminated: ok {rc=0} 15:47:07.773266 bus /gobi_0: Setting Powered False 15:47:08.881716 bus /gobi_0: Setting Powered False 15:47:09.990784 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1708): Process ended prematurely: osmo-stp_10.42.42.5(pid=1708) [trial-2391↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1708)]