Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=3605): Process ended prematurely: osmo-stp_10.42.42.5(pid=3605) [trial-2391↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3605)]
Standard Output
---------------------------------------------- trial-2391 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 16:02:43.976942 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:43.988427 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 16:02:44.160133 tst cs_paging_gprs_active.py: using LAC 34704 16:02:44.291371 tst cs_paging_gprs_active.py: using RAC 24 16:02:44.424935 tst cs_paging_gprs_active.py: using CellId 34704 16:02:44.558963 tst cs_paging_gprs_active.py: using BVCI 34705 16:02:44.584818 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:44.596307 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:44.607626 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:44.618925 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:44.630460 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:44.642167 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:44.653914 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:44.665444 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:44.677131 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:02:44.797549 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:02:45.102817 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:02:45.243222 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:02:45.594610 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3595): Launched 16:02:45.888512 run iperf3-srv_10.42.42.10(pid=3596): Launched 16:02:46.104323 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:02:46.248690 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:02:46.615320 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3597): Launched 16:02:46.925277 run iperf3-srv_10.42.42.10(pid=3598): Launched 16:02:47.136722 tst cs_paging_gprs_active.py:38: start network... 16:02:47.280939 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:02:47.812785 run create_hlr_db(pid=3599): Launched 16:02:48.007176 bus /gobi_6: Setting Powered False 16:02:49.028012 run create_hlr_db(pid=3599): Terminated: ok {rc=0} 16:02:49.454052 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3601): Launched 16:02:49.773651 run osmo-hlr_10.42.42.2(pid=3602): Launched 16:02:49.897560 run osmo-stp_10.42.42.5: Starting osmo-stp 16:02:50.456069 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3604): Launched 16:02:50.773997 run osmo-stp_10.42.42.5(pid=3605): Launched 16:02:50.889209 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:02:51.438553 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3607): Launched 16:02:51.550617 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:02:51.828487 run patchelf(pid=3608): Launched 16:02:52.012817 run osmo-stp_10.42.42.5(pid=3605): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3605)] 16:02:52.147346 run osmo-stp_10.42.42.5(pid=3605): stdout: | (launched: 2022-12-13_16:02:50.615903) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:02:52.282680 run osmo-stp_10.42.42.5(pid=3605): stderr: | �[0;m�[38;5;43m20221213160250791 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213160250791 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213160250791 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213160250792 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213160250792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213160250792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213160250792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:02:52.412699 run osmo-stp_10.42.42.5(pid=3605): stdout: | (launched: 2022-12-13_16:02:50.615903) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:02:52.543169 run osmo-stp_10.42.42.5(pid=3605): stderr: | �[0;m�[38;5;43m20221213160250791 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213160250791 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213160250791 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213160250792 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213160250792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213160250792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213160250792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:02:52.693996 run patchelf(pid=3608): Terminating (SIGINT) 16:02:52.871014 run patchelf(pid=3608): Terminated: ok {rc=0} 16:02:52.903400 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3605): Process ended prematurely: osmo-stp_10.42.42.5(pid=3605) [trial-2391↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3605)] [trial-2391↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 16:02:52.912792 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 16:02:52.973095 run osmo-hlr_10.42.42.2(pid=3602): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3602)] 16:02:53.022884 run osmo-hlr_10.42.42.2(pid=3602): stdout: | (launched: 2022-12-13_16:02:49.614604) 16:02:53.073183 run osmo-hlr_10.42.42.2(pid=3602): stderr: | �[0;m�[1;31m20221213160249798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213160249798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213160249798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213160249798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213160249798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213160249798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213160249809 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213160249817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213160249817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213160249817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:02:53.115894 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3595): Terminating (SIGTERM) 16:02:53.156043 run iperf3-srv_10.42.42.10(pid=3596): Terminating (SIGTERM) 16:02:53.200097 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3597): Terminating (SIGTERM) 16:02:53.242712 run iperf3-srv_10.42.42.10(pid=3598): Terminating (SIGTERM) 16:02:53.285605 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3601): Terminating (SIGTERM) 16:02:53.327876 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3604): Terminating (SIGTERM) 16:02:53.370718 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3607): Terminating (SIGTERM) 16:02:53.380342 --- ParallelTerminationStrategy: PID 3595 died... 16:02:53.437769 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3595): Terminated: ok {rc=0} 16:02:53.447953 --- ParallelTerminationStrategy: PID 3596 died... 16:02:53.504632 run iperf3-srv_10.42.42.10(pid=3596): Terminated {rc=256} 16:02:53.515109 --- ParallelTerminationStrategy: PID 3597 died... 16:02:53.571532 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3597): Terminated: ok {rc=0} 16:02:53.581648 --- ParallelTerminationStrategy: PID 3598 died... 16:02:53.637836 run iperf3-srv_10.42.42.10(pid=3598): Terminated {rc=256} 16:02:53.647859 --- ParallelTerminationStrategy: PID 3601 died... 16:02:53.704325 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3601): Terminated: ok {rc=0} 16:02:53.714342 --- ParallelTerminationStrategy: PID 3604 died... 16:02:53.770865 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3604): Terminated: ok {rc=0} 16:02:53.780915 --- ParallelTerminationStrategy: PID 3607 died... 16:02:53.837495 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3607): Terminated: ok {rc=0} 16:02:53.926236 bus /gobi_0: Setting Powered False 16:02:55.031189 bus /gobi_0: Setting Powered False 16:02:56.139961 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3605): Process ended prematurely: osmo-stp_10.42.42.5(pid=3605) [trial-2391↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3605)]