Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=4496): Process ended prematurely: osmo-stp_10.42.42.5(pid=4496) [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4496)]
Standard Output
---------------------------------------------- trial-2391 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 16:11:47.673920 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:11:47.685290 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 16:11:47.847373 tst cs_paging_gprs_active.py: using LAC 34751 16:11:47.971381 tst cs_paging_gprs_active.py: using RAC 71 16:11:48.096160 tst cs_paging_gprs_active.py: using CellId 34751 16:11:48.220678 tst cs_paging_gprs_active.py: using BVCI 34752 16:11:48.244403 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:11:48.255504 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:11:48.266480 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:11:48.277444 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:11:48.288304 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:11:48.299197 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:11:48.310297 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:11:48.321153 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:11:48.332101 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:11:48.454875 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:11:48.742991 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:11:48.872387 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:11:49.195735 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4486): Launched 16:11:49.467144 run iperf3-srv_10.42.42.10(pid=4487): Launched 16:11:49.657546 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:11:49.787379 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:11:50.114536 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4488): Launched 16:11:50.387018 run iperf3-srv_10.42.42.10(pid=4489): Launched 16:11:50.577247 tst cs_paging_gprs_active.py:38: start network... 16:11:50.707378 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:11:51.209036 run create_hlr_db(pid=4490): Launched 16:11:51.388064 bus /gobi_6: Setting Powered False 16:11:52.421319 run create_hlr_db(pid=4490): Terminated: ok {rc=0} 16:11:52.867977 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4492): Launched 16:11:53.204941 run osmo-hlr_10.42.42.2(pid=4493): Launched 16:11:53.328057 run osmo-stp_10.42.42.5: Starting osmo-stp 16:11:53.909399 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4495): Launched 16:11:54.245285 run osmo-stp_10.42.42.5(pid=4496): Launched 16:11:54.366714 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:11:54.951333 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4498): Launched 16:11:55.070805 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:11:55.365267 run patchelf(pid=4499): Launched 16:11:55.560251 run osmo-stp_10.42.42.5(pid=4496): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4496)] 16:11:55.703231 run osmo-stp_10.42.42.5(pid=4496): stdout: | (launched: 2022-12-13_16:11:54.079151) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:11:55.846100 run osmo-stp_10.42.42.5(pid=4496): stderr: | �[0;m�[38;5;43m20221213161154273 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213161154274 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213161154274 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213161154274 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213161154275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213161154275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213161154275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:11:55.983396 run osmo-stp_10.42.42.5(pid=4496): stdout: | (launched: 2022-12-13_16:11:54.079151) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:11:56.119963 run osmo-stp_10.42.42.5(pid=4496): stderr: | �[0;m�[38;5;43m20221213161154273 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213161154274 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213161154274 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213161154274 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213161154275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213161154275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213161154275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:11:56.278903 run patchelf(pid=4499): Terminating (SIGINT) 16:11:56.465805 run patchelf(pid=4499): Terminated: ok {rc=0} 16:11:56.499996 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4496): Process ended prematurely: osmo-stp_10.42.42.5(pid=4496) [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4496)] [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 16:11:56.510174 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 16:11:56.574186 run osmo-hlr_10.42.42.2(pid=4493): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4493)] 16:11:56.626114 run osmo-hlr_10.42.42.2(pid=4493): stdout: | (launched: 2022-12-13_16:11:53.038147) 16:11:56.679143 run osmo-hlr_10.42.42.2(pid=4493): stderr: | �[0;m�[1;31m20221213161153238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213161153238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213161153238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213161153238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213161153238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213161153238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213161153251 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213161153261 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213161153261 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213161153261 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:11:56.724602 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4486): Terminating (SIGTERM) 16:11:56.767858 run iperf3-srv_10.42.42.10(pid=4487): Terminating (SIGTERM) 16:11:56.811085 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4488): Terminating (SIGTERM) 16:11:56.854249 run iperf3-srv_10.42.42.10(pid=4489): Terminating (SIGTERM) 16:11:56.896595 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4492): Terminating (SIGTERM) 16:11:56.939047 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4495): Terminating (SIGTERM) 16:11:56.981579 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4498): Terminating (SIGTERM) 16:11:56.990934 --- ParallelTerminationStrategy: PID 4486 died... 16:11:57.047606 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4486): Terminated: ok {rc=0} 16:11:57.057739 --- ParallelTerminationStrategy: PID 4487 died... 16:11:57.113806 run iperf3-srv_10.42.42.10(pid=4487): Terminated {rc=256} 16:11:57.123719 --- ParallelTerminationStrategy: PID 4488 died... 16:11:57.179719 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4488): Terminated: ok {rc=0} 16:11:57.189742 --- ParallelTerminationStrategy: PID 4489 died... 16:11:57.245439 run iperf3-srv_10.42.42.10(pid=4489): Terminated {rc=256} 16:11:57.255352 --- ParallelTerminationStrategy: PID 4492 died... 16:11:57.311470 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4492): Terminated: ok {rc=0} 16:11:57.321886 --- ParallelTerminationStrategy: PID 4495 died... 16:11:57.378037 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4495): Terminated: ok {rc=0} 16:11:57.387969 --- ParallelTerminationStrategy: PID 4498 died... 16:11:57.444003 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4498): Terminated: ok {rc=0} 16:11:57.531370 bus /gobi_0: Setting Powered False 16:11:58.638841 bus /gobi_0: Setting Powered False 16:11:59.747985 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4496): Process ended prematurely: osmo-stp_10.42.42.5(pid=4496) [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4496)]