Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=11288): Process ended prematurely: osmo-stp_10.42.42.5(pid=11288) [trial-2392↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11288)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 17:36:46.682372 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:46.699390 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 17:36:46.868560 tst cs_paging_gprs_active.py: using LAC 35175 17:36:47.022541 tst cs_paging_gprs_active.py: using RAC 240 17:36:47.151491 tst cs_paging_gprs_active.py: using CellId 35175 17:36:47.293936 tst cs_paging_gprs_active.py: using BVCI 35176 17:36:47.319374 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:47.331353 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:47.343128 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:47.354784 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:47.366759 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:47.378837 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:47.391205 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:47.403177 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:47.415204 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 17:36:47.541639 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 17:36:47.846696 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:36:47.986649 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:36:48.334534 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11278): Launched 17:36:48.623213 run iperf3-srv_10.42.42.10(pid=11279): Launched 17:36:48.829648 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:36:48.970089 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:36:49.318407 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11280): Launched 17:36:49.607971 run iperf3-srv_10.42.42.10(pid=11281): Launched 17:36:49.813489 tst cs_paging_gprs_active.py:38: start network... 17:36:49.953438 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:36:50.481263 run create_hlr_db(pid=11282): Launched 17:36:50.675503 bus /gobi_6: Setting Powered False 17:36:51.695129 run create_hlr_db(pid=11282): Terminated: ok {rc=0} 17:36:52.115050 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11284): Launched 17:36:52.427817 run osmo-hlr_10.42.42.2(pid=11285): Launched 17:36:52.543810 run osmo-stp_10.42.42.5: Starting osmo-stp 17:36:53.085303 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11287): Launched 17:36:53.399414 run osmo-stp_10.42.42.5(pid=11288): Launched 17:36:53.512212 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:36:54.056487 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11290): Launched 17:36:54.167402 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:36:54.440901 run patchelf(pid=11291): Launched 17:36:54.624103 run osmo-stp_10.42.42.5(pid=11288): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11288)] 17:36:54.757925 run osmo-stp_10.42.42.5(pid=11288): stdout: | (launched: 2022-12-13_17:36:53.244666) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:36:54.892027 run osmo-stp_10.42.42.5(pid=11288): stderr: | �[0;m�[38;5;43m20221213173653413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213173653414 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213173653414 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213173653414 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213173653415 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213173653415 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213173653415 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:36:55.021057 run osmo-stp_10.42.42.5(pid=11288): stdout: | (launched: 2022-12-13_17:36:53.244666) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:36:55.149252 run osmo-stp_10.42.42.5(pid=11288): stderr: | �[0;m�[38;5;43m20221213173653413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213173653414 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213173653414 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213173653414 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213173653415 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213173653415 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213173653415 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:36:55.300204 run patchelf(pid=11291): Terminating (SIGINT) 17:36:55.477315 run patchelf(pid=11291): Terminated: ok {rc=0} 17:36:55.509487 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11288): Process ended prematurely: osmo-stp_10.42.42.5(pid=11288) [trial-2392↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11288)] [trial-2392↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 17:36:55.518849 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 17:36:55.579661 run osmo-hlr_10.42.42.2(pid=11285): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11285)] 17:36:55.629231 run osmo-hlr_10.42.42.2(pid=11285): stdout: | (launched: 2022-12-13_17:36:52.274006) 17:36:55.679554 run osmo-hlr_10.42.42.2(pid=11285): stderr: | �[0;m�[1;31m20221213173652451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213173652451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213173652451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213173652451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213173652451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213173652451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213173652463 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213173652471 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213173652472 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213173652472 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:36:55.722577 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11278): Terminating (SIGTERM) 17:36:55.763156 run iperf3-srv_10.42.42.10(pid=11279): Terminating (SIGTERM) 17:36:55.803731 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11280): Terminating (SIGTERM) 17:36:55.844225 run iperf3-srv_10.42.42.10(pid=11281): Terminating (SIGTERM) 17:36:55.884636 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11284): Terminating (SIGTERM) 17:36:55.925175 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11287): Terminating (SIGTERM) 17:36:55.965676 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11290): Terminating (SIGTERM) 17:36:55.975067 --- ParallelTerminationStrategy: PID 11278 died... 17:36:56.029141 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11278): Terminated: ok {rc=0} 17:36:56.038838 --- ParallelTerminationStrategy: PID 11279 died... 17:36:56.092573 run iperf3-srv_10.42.42.10(pid=11279): Terminated {rc=256} 17:36:56.102241 --- ParallelTerminationStrategy: PID 11280 died... 17:36:56.156344 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11280): Terminated: ok {rc=0} 17:36:56.166038 --- ParallelTerminationStrategy: PID 11281 died... 17:36:56.219833 run iperf3-srv_10.42.42.10(pid=11281): Terminated {rc=256} 17:36:56.229619 --- ParallelTerminationStrategy: PID 11284 died... 17:36:56.283600 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11284): Terminated: ok {rc=0} 17:36:56.293356 --- ParallelTerminationStrategy: PID 11287 died... 17:36:56.347322 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11287): Terminated: ok {rc=0} 17:36:56.357147 --- ParallelTerminationStrategy: PID 11290 died... 17:36:56.411147 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11290): Terminated: ok {rc=0} 17:36:56.500297 bus /gobi_0: Setting Powered False 17:36:57.606105 bus /gobi_0: Setting Powered False 17:36:58.720705 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11288): Process ended prematurely: osmo-stp_10.42.42.5(pid=11288) [trial-2392↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11288)]