Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=11009): Process ended prematurely: osmo-stp_10.42.42.5(pid=11009) [trial-2392↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11009)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 17:32:41.394671 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:41.405732 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 17:32:41.551219 tst cs_paging_gprs_active.py: using LAC 35155 17:32:41.671276 tst cs_paging_gprs_active.py: using RAC 220 17:32:41.791454 tst cs_paging_gprs_active.py: using CellId 35155 17:32:41.913563 tst cs_paging_gprs_active.py: using BVCI 35156 17:32:41.937602 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:41.948253 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:41.958741 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:41.969111 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:41.979877 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:41.990236 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:42.001127 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:42.011625 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:42.022269 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 17:32:42.147471 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 17:32:42.435262 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:32:42.564690 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:32:42.890043 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10999): Launched 17:32:43.157635 run iperf3-srv_10.42.42.10(pid=11000): Launched 17:32:43.348089 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:32:43.477316 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:32:43.801886 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11001): Launched 17:32:44.069418 run iperf3-srv_10.42.42.10(pid=11002): Launched 17:32:44.258139 tst cs_paging_gprs_active.py:38: start network... 17:32:44.386937 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:32:44.884441 run create_hlr_db(pid=11003): Launched 17:32:45.063419 bus /sierra_2: Setting Powered False 17:32:46.118870 run create_hlr_db(pid=11003): Terminated: ok {rc=0} 17:32:46.597925 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11005): Launched 17:32:47.093695 run osmo-hlr_10.42.42.2(pid=11006): Launched 17:32:47.299336 run osmo-stp_10.42.42.5: Starting osmo-stp 17:32:47.877688 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11008): Launched 17:32:48.211272 run osmo-stp_10.42.42.5(pid=11009): Launched 17:32:48.333122 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:32:48.918109 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11011): Launched 17:32:49.037894 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:32:49.331772 run patchelf(pid=11012): Launched 17:32:49.528018 run osmo-stp_10.42.42.5(pid=11009): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11009)] 17:32:49.671191 run osmo-stp_10.42.42.5(pid=11009): stdout: | (launched: 2022-12-13_17:32:48.047263) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:32:49.814485 run osmo-stp_10.42.42.5(pid=11009): stderr: | �[0;m�[38;5;43m20221213173248236 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213173248237 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213173248237 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213173248237 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213173248238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213173248238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213173248238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:32:49.952890 run osmo-stp_10.42.42.5(pid=11009): stdout: | (launched: 2022-12-13_17:32:48.047263) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:32:50.090014 run osmo-stp_10.42.42.5(pid=11009): stderr: | �[0;m�[38;5;43m20221213173248236 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213173248237 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213173248237 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213173248237 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213173248238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213173248238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213173248238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:32:50.251270 run patchelf(pid=11012): Terminating (SIGINT) 17:32:50.441115 run patchelf(pid=11012): Terminated: ok {rc=0} 17:32:50.475713 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11009): Process ended prematurely: osmo-stp_10.42.42.5(pid=11009) [trial-2392↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11009)] [trial-2392↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 17:32:50.485834 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 17:32:50.550696 run osmo-hlr_10.42.42.2(pid=11006): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11006)] 17:32:50.603579 run osmo-hlr_10.42.42.2(pid=11006): stdout: | (launched: 2022-12-13_17:32:46.793469) 17:32:50.656931 run osmo-hlr_10.42.42.2(pid=11006): stderr: | �[0;m�[1;31m20221213173247051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213173247051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213173247051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213173247051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213173247051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213173247051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213173247071 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213173247084 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213173247084 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213173247084 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:32:50.702865 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10999): Terminating (SIGTERM) 17:32:50.745835 run iperf3-srv_10.42.42.10(pid=11000): Terminating (SIGTERM) 17:32:50.788715 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11001): Terminating (SIGTERM) 17:32:50.831552 run iperf3-srv_10.42.42.10(pid=11002): Terminating (SIGTERM) 17:32:50.874533 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11005): Terminating (SIGTERM) 17:32:50.917438 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11008): Terminating (SIGTERM) 17:32:50.960531 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11011): Terminating (SIGTERM) 17:32:50.970514 --- ParallelTerminationStrategy: PID 10999 died... 17:32:51.028823 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10999): Terminated: ok {rc=0} 17:32:51.039253 --- ParallelTerminationStrategy: PID 11000 died... 17:32:51.097072 run iperf3-srv_10.42.42.10(pid=11000): Terminated {rc=256} 17:32:51.107410 --- ParallelTerminationStrategy: PID 11001 died... 17:32:51.164811 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11001): Terminated: ok {rc=0} 17:32:51.174957 --- ParallelTerminationStrategy: PID 11002 died... 17:32:51.231998 run iperf3-srv_10.42.42.10(pid=11002): Terminated {rc=256} 17:32:51.242129 --- ParallelTerminationStrategy: PID 11005 died... 17:32:51.299545 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11005): Terminated: ok {rc=0} 17:32:51.309905 --- ParallelTerminationStrategy: PID 11008 died... 17:32:51.367129 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11008): Terminated: ok {rc=0} 17:32:51.377477 --- ParallelTerminationStrategy: PID 11011 died... 17:32:51.435157 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11011): Terminated: ok {rc=0} 17:32:51.524022 bus /gobi_0: Setting Powered False 17:32:52.633650 bus /gobi_0: Setting Powered False 17:32:53.748724 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11009): Process ended prematurely: osmo-stp_10.42.42.5(pid=11009) [trial-2392↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11009)]