Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12644): Process ended prematurely: osmo-stp_10.42.42.5(pid=12644) [trial-2392↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12644)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 17:44:46.870828 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:46.885426 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 17:44:47.084099 tst cs_paging_gprs_active.py: using LAC 35217 17:44:47.212114 tst cs_paging_gprs_active.py: using RAC 27 17:44:47.336533 tst cs_paging_gprs_active.py: using CellId 35217 17:44:47.458974 tst cs_paging_gprs_active.py: using BVCI 35218 17:44:47.482676 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:47.493732 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:47.504373 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:47.515130 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:47.526080 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:47.536744 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:47.547640 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:47.558389 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:47.569268 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:44:47.692245 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:44:47.976003 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:44:48.103712 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:44:48.424205 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12634): Launched 17:44:48.690043 run iperf3-srv_10.42.42.10(pid=12635): Launched 17:44:48.877665 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:44:49.006170 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:44:49.326861 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12636): Launched 17:44:49.593782 run iperf3-srv_10.42.42.10(pid=12637): Launched 17:44:49.781905 tst cs_paging_gprs_active.py:38: start network... 17:44:49.910089 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:44:50.403585 run create_hlr_db(pid=12638): Launched 17:44:50.581805 bus /gobi_6: Setting Powered False 17:44:51.602524 run create_hlr_db(pid=12638): Terminated: ok {rc=0} 17:44:52.042720 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12640): Launched 17:44:52.372753 run osmo-hlr_10.42.42.2(pid=12641): Launched 17:44:52.493345 run osmo-stp_10.42.42.5: Starting osmo-stp 17:44:53.067860 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12643): Launched 17:44:53.397858 run osmo-stp_10.42.42.5(pid=12644): Launched 17:44:53.517993 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:44:54.093404 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12646): Launched 17:44:54.211272 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:44:54.500091 run patchelf(pid=12647): Launched 17:44:54.694223 run osmo-stp_10.42.42.5(pid=12644): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12644)] 17:44:54.835752 run osmo-stp_10.42.42.5(pid=12644): stdout: | (launched: 2022-12-13_17:44:53.236176) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:44:54.977388 run osmo-stp_10.42.42.5(pid=12644): stderr: | �[0;m�[38;5;43m20221213174453427 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213174453427 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213174453427 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213174453427 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213174453428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213174453428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213174453428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:44:55.114007 run osmo-stp_10.42.42.5(pid=12644): stdout: | (launched: 2022-12-13_17:44:53.236176) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:44:55.249242 run osmo-stp_10.42.42.5(pid=12644): stderr: | �[0;m�[38;5;43m20221213174453427 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213174453427 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213174453427 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213174453427 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213174453428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213174453428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213174453428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:44:55.408065 run patchelf(pid=12647): Terminating (SIGINT) 17:44:55.595760 run patchelf(pid=12647): Terminated: ok {rc=0} 17:44:55.630060 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12644): Process ended prematurely: osmo-stp_10.42.42.5(pid=12644) [trial-2392↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12644)] [trial-2392↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 17:44:55.640005 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 17:44:55.704333 run osmo-hlr_10.42.42.2(pid=12641): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12641)] 17:44:55.756603 run osmo-hlr_10.42.42.2(pid=12641): stdout: | (launched: 2022-12-13_17:44:52.210991) 17:44:55.809584 run osmo-hlr_10.42.42.2(pid=12641): stderr: | �[0;m�[1;31m20221213174452406 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213174452406 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213174452406 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213174452406 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213174452406 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213174452406 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213174452419 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213174452428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213174452428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213174452428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:44:55.854994 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12634): Terminating (SIGTERM) 17:44:55.897768 run iperf3-srv_10.42.42.10(pid=12635): Terminating (SIGTERM) 17:44:55.940906 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12636): Terminating (SIGTERM) 17:44:55.983609 run iperf3-srv_10.42.42.10(pid=12637): Terminating (SIGTERM) 17:44:56.026820 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12640): Terminating (SIGTERM) 17:44:56.069422 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12643): Terminating (SIGTERM) 17:44:56.112005 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12646): Terminating (SIGTERM) 17:44:56.121848 --- ParallelTerminationStrategy: PID 12634 died... 17:44:56.179181 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12634): Terminated: ok {rc=0} 17:44:56.189327 --- ParallelTerminationStrategy: PID 12635 died... 17:44:56.246369 run iperf3-srv_10.42.42.10(pid=12635): Terminated {rc=256} 17:44:56.256438 --- ParallelTerminationStrategy: PID 12636 died... 17:44:56.313221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12636): Terminated: ok {rc=0} 17:44:56.323267 --- ParallelTerminationStrategy: PID 12637 died... 17:44:56.380001 run iperf3-srv_10.42.42.10(pid=12637): Terminated {rc=256} 17:44:56.390073 --- ParallelTerminationStrategy: PID 12640 died... 17:44:56.447289 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12640): Terminated: ok {rc=0} 17:44:56.457504 --- ParallelTerminationStrategy: PID 12643 died... 17:44:56.514634 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12643): Terminated: ok {rc=0} 17:44:56.524767 --- ParallelTerminationStrategy: PID 12646 died... 17:44:56.581701 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12646): Terminated: ok {rc=0} 17:44:56.669581 bus /gobi_0: Setting Powered False 17:44:57.777380 bus /gobi_0: Setting Powered False 17:44:58.885998 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12644): Process ended prematurely: osmo-stp_10.42.42.5(pid=12644) [trial-2392↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12644)]