Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13222): Process ended prematurely: osmo-stp_10.42.42.5(pid=13222) [trial-2392↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13222)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 17:53:05.550015 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:53:05.560819 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 17:53:05.726372 tst cs_paging_gprs_active.py: using LAC 35261 17:53:05.855263 tst cs_paging_gprs_active.py: using RAC 71 17:53:05.985578 tst cs_paging_gprs_active.py: using CellId 35261 17:53:06.116323 tst cs_paging_gprs_active.py: using BVCI 35262 17:53:06.141716 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:53:06.153350 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:53:06.164784 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:53:06.176289 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:53:06.188182 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:53:06.200097 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:53:06.212115 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:53:06.224025 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:53:06.236102 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:53:06.357016 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:53:06.662369 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:53:06.801062 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:53:07.143472 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13212): Launched 17:53:07.428999 run iperf3-srv_10.42.42.10(pid=13213): Launched 17:53:07.630712 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:53:07.768652 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:53:08.111019 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13214): Launched 17:53:08.395001 run iperf3-srv_10.42.42.10(pid=13215): Launched 17:53:08.596263 tst cs_paging_gprs_active.py:38: start network... 17:53:08.734139 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:53:09.250924 run create_hlr_db(pid=13216): Launched 17:53:09.441319 bus /gobi_6: Setting Powered False 17:53:10.462645 run create_hlr_db(pid=13216): Terminated: ok {rc=0} 17:53:10.878312 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13218): Launched 17:53:11.186996 run osmo-hlr_10.42.42.2(pid=13219): Launched 17:53:11.302004 run osmo-stp_10.42.42.5: Starting osmo-stp 17:53:11.835697 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13221): Launched 17:53:12.142701 run osmo-stp_10.42.42.5(pid=13222): Launched 17:53:12.253497 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:53:12.791097 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13224): Launched 17:53:12.900175 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:53:13.171083 run patchelf(pid=13225): Launched 17:53:13.350914 run osmo-stp_10.42.42.5(pid=13222): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13222)] 17:53:13.482496 run osmo-stp_10.42.42.5(pid=13222): stdout: | (launched: 2022-12-13_17:53:11.991967) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:53:13.614331 run osmo-stp_10.42.42.5(pid=13222): stderr: | �[0;m�[38;5;43m20221213175312160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213175312160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213175312160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213175312161 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213175312161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213175312161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213175312162 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:53:13.741072 run osmo-stp_10.42.42.5(pid=13222): stdout: | (launched: 2022-12-13_17:53:11.991967) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:53:13.866545 run osmo-stp_10.42.42.5(pid=13222): stderr: | �[0;m�[38;5;43m20221213175312160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213175312160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213175312160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213175312161 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213175312161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213175312161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213175312162 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:53:14.014369 run patchelf(pid=13225): Terminating (SIGINT) 17:53:14.188601 run patchelf(pid=13225): Terminated: ok {rc=0} 17:53:14.220517 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13222): Process ended prematurely: osmo-stp_10.42.42.5(pid=13222) [trial-2392↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13222)] [trial-2392↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 17:53:14.229903 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 17:53:14.290180 run osmo-hlr_10.42.42.2(pid=13219): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13219)] 17:53:14.339813 run osmo-hlr_10.42.42.2(pid=13219): stdout: | (launched: 2022-12-13_17:53:11.035579) 17:53:14.390054 run osmo-hlr_10.42.42.2(pid=13219): stderr: | �[0;m�[1;31m20221213175311213 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213175311213 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213175311213 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213175311213 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213175311213 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213175311213 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213175311225 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213175311236 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213175311236 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213175311236 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:53:14.432325 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13212): Terminating (SIGTERM) 17:53:14.472031 run iperf3-srv_10.42.42.10(pid=13213): Terminating (SIGTERM) 17:53:14.511828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13214): Terminating (SIGTERM) 17:53:14.551614 run iperf3-srv_10.42.42.10(pid=13215): Terminating (SIGTERM) 17:53:14.591668 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13218): Terminating (SIGTERM) 17:53:14.631590 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13221): Terminating (SIGTERM) 17:53:14.671646 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13224): Terminating (SIGTERM) 17:53:14.680816 --- ParallelTerminationStrategy: PID 13212 died... 17:53:14.734349 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13212): Terminated: ok {rc=0} 17:53:14.743886 --- ParallelTerminationStrategy: PID 13213 died... 17:53:14.797223 run iperf3-srv_10.42.42.10(pid=13213): Terminated {rc=256} 17:53:14.806836 --- ParallelTerminationStrategy: PID 13214 died... 17:53:14.860304 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13214): Terminated: ok {rc=0} 17:53:14.869899 --- ParallelTerminationStrategy: PID 13215 died... 17:53:14.922918 run iperf3-srv_10.42.42.10(pid=13215): Terminated {rc=256} 17:53:14.932412 --- ParallelTerminationStrategy: PID 13218 died... 17:53:14.985815 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13218): Terminated: ok {rc=0} 17:53:14.995557 --- ParallelTerminationStrategy: PID 13221 died... 17:53:15.049337 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13221): Terminated: ok {rc=0} 17:53:15.058935 --- ParallelTerminationStrategy: PID 13224 died... 17:53:15.112349 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13224): Terminated: ok {rc=0} 17:53:15.197289 bus /gobi_0: Setting Powered False 17:53:16.324089 bus /gobi_0: Setting Powered False 17:53:17.435804 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13222): Process ended prematurely: osmo-stp_10.42.42.5(pid=13222) [trial-2392↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13222)]