Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=24458): Process ended prematurely: osmo-stp_10.42.42.5(pid=24458) [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24458)]
Standard Output
---------------------------------------------- trial-2393 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 19:51:12.269539 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:12.281471 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 19:51:12.425500 tst cs_paging_gprs_active.py: using LAC 35882 19:51:12.549864 tst cs_paging_gprs_active.py: using RAC 182 19:51:12.674796 tst cs_paging_gprs_active.py: using CellId 35882 19:51:12.799887 tst cs_paging_gprs_active.py: using BVCI 35883 19:51:12.824326 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:12.836121 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:12.848042 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:12.859679 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:12.871575 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:12.883463 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:12.895612 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:12.907622 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:12.919985 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:51:13.036607 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:51:13.328437 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:51:13.463033 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:51:13.794791 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24448): Launched 19:51:14.070160 run iperf3-srv_10.42.42.10(pid=24449): Launched 19:51:14.266956 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:51:14.400848 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:51:14.732263 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24450): Launched 19:51:15.007376 run iperf3-srv_10.42.42.10(pid=24451): Launched 19:51:15.204416 tst cs_paging_gprs_active.py:38: start network... 19:51:15.339287 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:51:15.854639 run create_hlr_db(pid=24452): Launched 19:51:16.045467 bus /gobi_6: Setting Powered False 19:51:17.066331 run create_hlr_db(pid=24452): Terminated: ok {rc=0} 19:51:17.499983 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24454): Launched 19:51:17.820278 run osmo-hlr_10.42.42.2(pid=24455): Launched 19:51:17.936667 run osmo-stp_10.42.42.5: Starting osmo-stp 19:51:18.495296 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24457): Launched 19:51:18.816594 run osmo-stp_10.42.42.5(pid=24458): Launched 19:51:18.933404 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:51:19.493698 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24460): Launched 19:51:19.608350 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:51:19.887179 run patchelf(pid=24461): Launched 19:51:20.074723 run osmo-stp_10.42.42.5(pid=24458): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24458)] 19:51:20.212050 run osmo-stp_10.42.42.5(pid=24458): stdout: | (launched: 2022-12-13_19:51:18.658715) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:51:20.349994 run osmo-stp_10.42.42.5(pid=24458): stderr: | �[0;m�[38;5;43m20221213195118846 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213195118846 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213195118846 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213195118847 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213195118847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213195118847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213195118847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:51:20.482745 run osmo-stp_10.42.42.5(pid=24458): stdout: | (launched: 2022-12-13_19:51:18.658715) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:51:20.614295 run osmo-stp_10.42.42.5(pid=24458): stderr: | �[0;m�[38;5;43m20221213195118846 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213195118846 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213195118846 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213195118847 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213195118847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213195118847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213195118847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:51:20.767506 run patchelf(pid=24461): Terminating (SIGINT) 19:51:20.947064 run patchelf(pid=24461): Terminated: ok {rc=0} 19:51:20.979921 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24458): Process ended prematurely: osmo-stp_10.42.42.5(pid=24458) [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24458)] [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 19:51:20.989844 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 19:51:21.053085 run osmo-hlr_10.42.42.2(pid=24455): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24455)] 19:51:21.104880 run osmo-hlr_10.42.42.2(pid=24455): stdout: | (launched: 2022-12-13_19:51:17.662777) 19:51:21.157208 run osmo-hlr_10.42.42.2(pid=24455): stderr: | �[0;m�[1;31m20221213195117856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213195117856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213195117856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213195117856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213195117856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213195117857 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213195117869 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213195117877 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213195117878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213195117878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:51:21.201858 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24448): Terminating (SIGTERM) 19:51:21.244532 run iperf3-srv_10.42.42.10(pid=24449): Terminating (SIGTERM) 19:51:21.286927 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24450): Terminating (SIGTERM) 19:51:21.328925 run iperf3-srv_10.42.42.10(pid=24451): Terminating (SIGTERM) 19:51:21.371014 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24454): Terminating (SIGTERM) 19:51:21.412934 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24457): Terminating (SIGTERM) 19:51:21.454995 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24460): Terminating (SIGTERM) 19:51:21.464526 --- ParallelTerminationStrategy: PID 24448 died... 19:51:21.521367 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24448): Terminated: ok {rc=0} 19:51:21.531340 --- ParallelTerminationStrategy: PID 24449 died... 19:51:21.587454 run iperf3-srv_10.42.42.10(pid=24449): Terminated {rc=256} 19:51:21.597398 --- ParallelTerminationStrategy: PID 24450 died... 19:51:21.653474 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24450): Terminated: ok {rc=0} 19:51:21.663721 --- ParallelTerminationStrategy: PID 24451 died... 19:51:21.719917 run iperf3-srv_10.42.42.10(pid=24451): Terminated {rc=256} 19:51:21.729918 --- ParallelTerminationStrategy: PID 24454 died... 19:51:21.785658 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24454): Terminated: ok {rc=0} 19:51:21.795548 --- ParallelTerminationStrategy: PID 24457 died... 19:51:21.851396 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24457): Terminated: ok {rc=0} 19:51:21.861392 --- ParallelTerminationStrategy: PID 24460 died... 19:51:21.917226 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24460): Terminated: ok {rc=0} 19:51:22.004860 bus /gobi_0: Setting Powered False 19:51:23.109262 bus /gobi_0: Setting Powered False 19:51:24.219904 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24458): Process ended prematurely: osmo-stp_10.42.42.5(pid=24458) [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24458)]