Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=23043): Process ended prematurely: osmo-stp_10.42.42.5(pid=23043) [trial-2393↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23043)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 19:34:58.346391 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:34:58.357228 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 19:34:58.489772 tst cs_paging_gprs_active.py: using LAC 35796 19:34:58.607580 tst cs_paging_gprs_active.py: using RAC 96 19:34:58.726470 tst cs_paging_gprs_active.py: using CellId 35796 19:34:58.844044 tst cs_paging_gprs_active.py: using BVCI 35797 19:34:58.866965 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:34:58.877794 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:34:58.888435 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:34:58.899051 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:34:58.909901 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:34:58.920771 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:34:58.931936 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:34:58.942819 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:34:58.953567 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 19:34:59.068533 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 19:34:59.364325 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:34:59.501372 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:34:59.838116 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23030): Launched 19:35:00.118481 run iperf3-srv_10.42.42.10(pid=23031): Launched 19:35:00.318489 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:35:00.454525 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:35:00.790677 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23032): Launched 19:35:01.098280 run iperf3-srv_10.42.42.10(pid=23033): Launched 19:35:01.289447 tst cs_paging_gprs_active.py:38: start network... 19:35:01.419820 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:35:01.965378 run create_hlr_db(pid=23034): Launched 19:35:02.142818 bus /sierra_2: Setting Powered False 19:35:03.161197 run create_hlr_db(pid=23034): Terminated: ok {rc=0} 19:35:03.561982 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23039): Launched 19:35:03.862107 run osmo-hlr_10.42.42.2(pid=23040): Launched 19:35:03.975885 run osmo-stp_10.42.42.5: Starting osmo-stp 19:35:04.499950 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23042): Launched 19:35:04.800243 run osmo-stp_10.42.42.5(pid=23043): Launched 19:35:04.908730 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:35:05.433951 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23045): Launched 19:35:05.541530 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:35:05.803975 run patchelf(pid=23046): Launched 19:35:05.979991 run osmo-stp_10.42.42.5(pid=23043): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23043)] 19:35:06.108631 run osmo-stp_10.42.42.5(pid=23043): stdout: | (launched: 2022-12-13_19:35:04.652791) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:35:06.237569 run osmo-stp_10.42.42.5(pid=23043): stderr: | �[0;m�[38;5;43m20221213193504821 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213193504821 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213193504821 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213193504822 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213193504822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213193504822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213193504822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:35:06.361749 run osmo-stp_10.42.42.5(pid=23043): stdout: | (launched: 2022-12-13_19:35:04.652791) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:35:06.484568 run osmo-stp_10.42.42.5(pid=23043): stderr: | �[0;m�[38;5;43m20221213193504821 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213193504821 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213193504821 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213193504822 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213193504822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213193504822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213193504822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:35:06.628239 run patchelf(pid=23046): Terminating (SIGINT) 19:35:06.797501 run patchelf(pid=23046): Terminated: ok {rc=0} 19:35:06.828480 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23043): Process ended prematurely: osmo-stp_10.42.42.5(pid=23043) [trial-2393↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23043)] [trial-2393↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 19:35:06.837653 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 19:35:06.897617 run osmo-hlr_10.42.42.2(pid=23040): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23040)] 19:35:06.946085 run osmo-hlr_10.42.42.2(pid=23040): stdout: | (launched: 2022-12-13_19:35:03.714419) 19:35:06.995032 run osmo-hlr_10.42.42.2(pid=23040): stderr: | �[0;m�[1;31m20221213193503886 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213193503886 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213193503887 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213193503887 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213193503887 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213193503887 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213193503899 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213193503908 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213193503909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213193503909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:35:07.036643 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23030): Terminating (SIGTERM) 19:35:07.075815 run iperf3-srv_10.42.42.10(pid=23031): Terminating (SIGTERM) 19:35:07.115139 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23032): Terminating (SIGTERM) 19:35:07.154201 run iperf3-srv_10.42.42.10(pid=23033): Terminating (SIGTERM) 19:35:07.193479 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23039): Terminating (SIGTERM) 19:35:07.232593 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23042): Terminating (SIGTERM) 19:35:07.271866 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23045): Terminating (SIGTERM) 19:35:07.281177 --- ParallelTerminationStrategy: PID 23030 died... 19:35:07.334181 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23030): Terminated: ok {rc=0} 19:35:07.343797 --- ParallelTerminationStrategy: PID 23031 died... 19:35:07.396012 run iperf3-srv_10.42.42.10(pid=23031): Terminated {rc=256} 19:35:07.405685 --- ParallelTerminationStrategy: PID 23032 died... 19:35:07.457979 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23032): Terminated: ok {rc=0} 19:35:07.467533 --- ParallelTerminationStrategy: PID 23033 died... 19:35:07.520157 run iperf3-srv_10.42.42.10(pid=23033): Terminated {rc=256} 19:35:07.529811 --- ParallelTerminationStrategy: PID 23039 died... 19:35:07.582227 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23039): Terminated: ok {rc=0} 19:35:07.591797 --- ParallelTerminationStrategy: PID 23042 died... 19:35:07.644188 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23042): Terminated: ok {rc=0} 19:35:07.653886 --- ParallelTerminationStrategy: PID 23045 died... 19:35:07.706319 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23045): Terminated: ok {rc=0} 19:35:07.788405 bus /gobi_0: Setting Powered False 19:35:08.893679 bus /gobi_0: Setting Powered False 19:35:09.998849 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23043): Process ended prematurely: osmo-stp_10.42.42.5(pid=23043) [trial-2393↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23043)]