Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=21808): Process ended prematurely: osmo-stp_10.42.42.5(pid=21808) [trial-2393↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21808)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 19:21:09.262166 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:21:09.273668 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:21:09.438206 tst cs_paging_gprs_active.py: using LAC 35722 19:21:09.563929 tst cs_paging_gprs_active.py: using RAC 22 19:21:09.691202 tst cs_paging_gprs_active.py: using CellId 35722 19:21:09.816798 tst cs_paging_gprs_active.py: using BVCI 35723 19:21:09.841601 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:21:09.852893 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:21:09.864161 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:21:09.875493 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:21:09.887076 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:21:09.898624 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:21:09.910367 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:21:09.921946 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:21:09.933715 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:21:10.050729 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:21:10.352398 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:21:10.488919 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:21:10.824275 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21798): Launched 19:21:11.103334 run iperf3-srv_10.42.42.10(pid=21799): Launched 19:21:11.302378 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:21:11.438700 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:21:11.772342 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21800): Launched 19:21:12.050798 run iperf3-srv_10.42.42.10(pid=21801): Launched 19:21:12.249985 tst cs_paging_gprs_active.py:38: start network... 19:21:12.385769 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:21:12.896058 run create_hlr_db(pid=21802): Launched 19:21:13.083129 bus /gobi_6: Setting Powered False 19:21:14.106048 run create_hlr_db(pid=21802): Terminated: ok {rc=0} 19:21:14.514013 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21804): Launched 19:21:14.817215 run osmo-hlr_10.42.42.2(pid=21805): Launched 19:21:14.935274 run osmo-stp_10.42.42.5: Starting osmo-stp 19:21:15.466440 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21807): Launched 19:21:15.768220 run osmo-stp_10.42.42.5(pid=21808): Launched 19:21:15.929524 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:21:16.501450 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21810): Launched 19:21:16.623621 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:21:16.930593 run patchelf(pid=21811): Launched 19:21:17.126889 run osmo-stp_10.42.42.5(pid=21808): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21808)] 19:21:17.268620 run osmo-stp_10.42.42.5(pid=21808): stdout: | (launched: 2022-12-13_19:21:15.619766) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:21:17.408669 run osmo-stp_10.42.42.5(pid=21808): stderr: | �[0;m�[38;5;43m20221213192115784 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213192115784 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213192115785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213192115785 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213192115786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213192115786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213192115786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:21:17.543050 run osmo-stp_10.42.42.5(pid=21808): stdout: | (launched: 2022-12-13_19:21:15.619766) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:21:17.676572 run osmo-stp_10.42.42.5(pid=21808): stderr: | �[0;m�[38;5;43m20221213192115784 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213192115784 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213192115785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213192115785 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213192115786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213192115786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213192115786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:21:17.831572 run patchelf(pid=21811): Terminating (SIGINT) 19:21:18.014039 run patchelf(pid=21811): Terminated: ok {rc=0} 19:21:18.047401 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21808): Process ended prematurely: osmo-stp_10.42.42.5(pid=21808) [trial-2393↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21808)] [trial-2393↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 19:21:18.057393 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 19:21:18.121460 run osmo-hlr_10.42.42.2(pid=21805): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21805)] 19:21:18.173452 run osmo-hlr_10.42.42.2(pid=21805): stdout: | (launched: 2022-12-13_19:21:14.668105) 19:21:18.226034 run osmo-hlr_10.42.42.2(pid=21805): stderr: | �[0;m�[1;31m20221213192114839 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213192114840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213192114840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213192114840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213192114840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213192114840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213192114852 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213192114863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213192114864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213192114864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:21:18.271234 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21798): Terminating (SIGTERM) 19:21:18.313684 run iperf3-srv_10.42.42.10(pid=21799): Terminating (SIGTERM) 19:21:18.356178 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21800): Terminating (SIGTERM) 19:21:18.398823 run iperf3-srv_10.42.42.10(pid=21801): Terminating (SIGTERM) 19:21:18.441077 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21804): Terminating (SIGTERM) 19:21:18.483768 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21807): Terminating (SIGTERM) 19:21:18.526650 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21810): Terminating (SIGTERM) 19:21:18.536243 --- ParallelTerminationStrategy: PID 21798 died... 19:21:18.593063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21798): Terminated: ok {rc=0} 19:21:18.603054 --- ParallelTerminationStrategy: PID 21799 died... 19:21:18.659492 run iperf3-srv_10.42.42.10(pid=21799): Terminated {rc=256} 19:21:18.669932 --- ParallelTerminationStrategy: PID 21800 died... 19:21:18.726587 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21800): Terminated: ok {rc=0} 19:21:18.736543 --- ParallelTerminationStrategy: PID 21801 died... 19:21:18.792983 run iperf3-srv_10.42.42.10(pid=21801): Terminated {rc=256} 19:21:18.802961 --- ParallelTerminationStrategy: PID 21804 died... 19:21:18.859460 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21804): Terminated: ok {rc=0} 19:21:18.869901 --- ParallelTerminationStrategy: PID 21807 died... 19:21:18.926496 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21807): Terminated: ok {rc=0} 19:21:18.936642 --- ParallelTerminationStrategy: PID 21810 died... 19:21:18.993252 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21810): Terminated: ok {rc=0} 19:21:19.082580 bus /gobi_0: Setting Powered False 19:21:20.188231 bus /gobi_0: Setting Powered False 19:21:21.295978 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21808): Process ended prematurely: osmo-stp_10.42.42.5(pid=21808) [trial-2393↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21808)]