Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=500): Process ended prematurely: osmo-stp_10.42.42.5(pid=500) [trial-2394↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=500)]
Standard Output
---------------------------------------------- trial-2394 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 21:09:50.084901 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:50.095704 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 21:09:50.223532 tst cs_paging_gprs_active.py: using LAC 36295 21:09:50.348217 tst cs_paging_gprs_active.py: using RAC 85 21:09:50.473166 tst cs_paging_gprs_active.py: using CellId 36295 21:09:50.597832 tst cs_paging_gprs_active.py: using BVCI 36296 21:09:50.622819 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:50.633945 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:50.644829 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:50.655732 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:50.667100 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:50.678535 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:50.690381 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:50.701722 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:50.713284 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 21:09:50.830739 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 21:09:51.123586 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:09:51.257952 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:09:51.588383 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=490): Launched 21:09:51.862955 run iperf3-srv_10.42.42.10(pid=491): Launched 21:09:52.059955 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:09:52.193919 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:09:52.524564 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=492): Launched 21:09:52.800671 run iperf3-srv_10.42.42.10(pid=493): Launched 21:09:52.997294 tst cs_paging_gprs_active.py:38: start network... 21:09:53.131212 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:09:53.643773 run create_hlr_db(pid=494): Launched 21:09:53.828808 bus /sierra_2: Setting Powered False 21:09:54.848920 run create_hlr_db(pid=494): Terminated: ok {rc=0} 21:09:55.250200 run pcap-recorder_any(filters='host 10.42.42.2')(pid=496): Launched 21:09:55.550322 run osmo-hlr_10.42.42.2(pid=497): Launched 21:09:55.668472 run osmo-stp_10.42.42.5: Starting osmo-stp 21:09:56.191351 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=499): Launched 21:09:56.491382 run osmo-stp_10.42.42.5(pid=500): Launched 21:09:56.601648 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:09:57.123767 run pcap-recorder_any(filters='host 10.42.42.6')(pid=502): Launched 21:09:57.231580 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:09:57.493043 run patchelf(pid=503): Launched 21:09:57.669254 run osmo-stp_10.42.42.5(pid=500): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=500)] 21:09:57.797639 run osmo-stp_10.42.42.5(pid=500): stdout: | (launched: 2022-12-13_21:09:56.343612) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:09:57.926393 run osmo-stp_10.42.42.5(pid=500): stderr: | �[0;m�[38;5;43m20221213210956509 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213210956509 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213210956509 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213210956510 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213210956510 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213210956510 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213210956510 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:09:58.051002 run osmo-stp_10.42.42.5(pid=500): stdout: | (launched: 2022-12-13_21:09:56.343612) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:09:58.174469 run osmo-stp_10.42.42.5(pid=500): stderr: | �[0;m�[38;5;43m20221213210956509 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213210956509 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213210956509 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213210956510 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213210956510 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213210956510 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213210956510 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:09:58.318706 run patchelf(pid=503): Terminating (SIGINT) 21:09:58.487895 run patchelf(pid=503): Terminated: ok {rc=0} 21:09:58.519008 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=500): Process ended prematurely: osmo-stp_10.42.42.5(pid=500) [trial-2394↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=500)] [trial-2394↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 21:09:58.528124 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 21:09:58.588306 run osmo-hlr_10.42.42.2(pid=497): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=497)] 21:09:58.637225 run osmo-hlr_10.42.42.2(pid=497): stdout: | (launched: 2022-12-13_21:09:55.402524) 21:09:58.687099 run osmo-hlr_10.42.42.2(pid=497): stderr: | �[0;m�[1;31m20221213210955576 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213210955576 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213210955576 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213210955576 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213210955576 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213210955576 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213210955592 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213210955602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213210955603 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213210955603 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:09:58.729446 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=490): Terminating (SIGTERM) 21:09:58.769309 run iperf3-srv_10.42.42.10(pid=491): Terminating (SIGTERM) 21:09:58.808906 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=492): Terminating (SIGTERM) 21:09:58.848663 run iperf3-srv_10.42.42.10(pid=493): Terminating (SIGTERM) 21:09:58.888512 run pcap-recorder_any(filters='host 10.42.42.2')(pid=496): Terminating (SIGTERM) 21:09:58.928330 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=499): Terminating (SIGTERM) 21:09:58.968334 run pcap-recorder_any(filters='host 10.42.42.6')(pid=502): Terminating (SIGTERM) 21:09:58.977692 --- ParallelTerminationStrategy: PID 490 died... 21:09:59.032016 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=490): Terminated: ok {rc=0} 21:09:59.041994 --- ParallelTerminationStrategy: PID 491 died... 21:09:59.095229 run iperf3-srv_10.42.42.10(pid=491): Terminated {rc=256} 21:09:59.104683 --- ParallelTerminationStrategy: PID 492 died... 21:09:59.157828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=492): Terminated: ok {rc=0} 21:09:59.167262 --- ParallelTerminationStrategy: PID 493 died... 21:09:59.220007 run iperf3-srv_10.42.42.10(pid=493): Terminated {rc=256} 21:09:59.229862 --- ParallelTerminationStrategy: PID 496 died... 21:09:59.282772 run pcap-recorder_any(filters='host 10.42.42.2')(pid=496): Terminated: ok {rc=0} 21:09:59.292207 --- ParallelTerminationStrategy: PID 499 died... 21:09:59.345614 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=499): Terminated: ok {rc=0} 21:09:59.355122 --- ParallelTerminationStrategy: PID 502 died... 21:09:59.408763 run pcap-recorder_any(filters='host 10.42.42.6')(pid=502): Terminated: ok {rc=0} 21:09:59.497668 bus /gobi_0: Setting Powered False 21:10:00.599340 bus /gobi_0: Setting Powered False 21:10:01.727371 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=500): Process ended prematurely: osmo-stp_10.42.42.5(pid=500) [trial-2394↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=500)]