Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=26415): Process ended prematurely: osmo-stp_10.42.42.5(pid=26415) [trial-2394↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26415)]
Standard Output
---------------------------------------------- trial-2394 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:15:01.867202 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:15:01.879587 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:15:02.041366 tst cs_paging_gprs_active.py: using LAC 36004 20:15:02.167149 tst cs_paging_gprs_active.py: using RAC 49 20:15:02.292639 tst cs_paging_gprs_active.py: using CellId 36004 20:15:02.421545 tst cs_paging_gprs_active.py: using BVCI 36005 20:15:02.448314 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:15:02.460593 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:15:02.472758 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:15:02.485123 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:15:02.497481 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:15:02.510210 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:15:02.523071 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:15:02.535613 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:15:02.548243 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:15:02.670068 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:15:02.971857 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:15:03.110397 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:15:03.452352 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26405): Launched 20:15:03.737996 run iperf3-srv_10.42.42.10(pid=26406): Launched 20:15:03.941530 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:15:04.079770 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:15:04.425191 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26407): Launched 20:15:04.711666 run iperf3-srv_10.42.42.10(pid=26408): Launched 20:15:04.914549 tst cs_paging_gprs_active.py:38: start network... 20:15:05.053760 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:15:05.584907 run create_hlr_db(pid=26409): Launched 20:15:05.776176 bus /gobi_6: Setting Powered False 20:15:06.796703 run create_hlr_db(pid=26409): Terminated: ok {rc=0} 20:15:07.231820 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26411): Launched 20:15:07.567056 run osmo-hlr_10.42.42.2(pid=26412): Launched 20:15:07.691415 run osmo-stp_10.42.42.5: Starting osmo-stp 20:15:08.267781 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26414): Launched 20:15:08.599871 run osmo-stp_10.42.42.5(pid=26415): Launched 20:15:08.719627 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:15:09.298489 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26417): Launched 20:15:09.416524 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:15:09.706434 run patchelf(pid=26418): Launched 20:15:09.899074 run osmo-stp_10.42.42.5(pid=26415): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26415)] 20:15:10.039982 run osmo-stp_10.42.42.5(pid=26415): stdout: | (launched: 2022-12-13_20:15:08.435666) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:15:10.180707 run osmo-stp_10.42.42.5(pid=26415): stderr: | �[0;m�[38;5;43m20221213201508630 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213201508631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213201508631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213201508631 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213201508632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213201508632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213201508632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:15:10.317950 run osmo-stp_10.42.42.5(pid=26415): stdout: | (launched: 2022-12-13_20:15:08.435666) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:15:10.454138 run osmo-stp_10.42.42.5(pid=26415): stderr: | �[0;m�[38;5;43m20221213201508630 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213201508631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213201508631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213201508631 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213201508632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213201508632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213201508632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:15:10.613253 run patchelf(pid=26418): Terminating (SIGINT) 20:15:10.799600 run patchelf(pid=26418): Terminated: ok {rc=0} 20:15:10.833507 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26415): Process ended prematurely: osmo-stp_10.42.42.5(pid=26415) [trial-2394↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26415)] [trial-2394↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:15:10.843253 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 20:15:10.906363 run osmo-hlr_10.42.42.2(pid=26412): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26412)] 20:15:10.958342 run osmo-hlr_10.42.42.2(pid=26412): stdout: | (launched: 2022-12-13_20:15:07.401439) 20:15:11.010490 run osmo-hlr_10.42.42.2(pid=26412): stderr: | �[0;m�[1;31m20221213201507603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213201507603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213201507603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213201507603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213201507603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213201507603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213201507615 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213201507625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213201507625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213201507625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:15:11.054928 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26405): Terminating (SIGTERM) 20:15:11.096888 run iperf3-srv_10.42.42.10(pid=26406): Terminating (SIGTERM) 20:15:11.138909 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26407): Terminating (SIGTERM) 20:15:11.180753 run iperf3-srv_10.42.42.10(pid=26408): Terminating (SIGTERM) 20:15:11.222631 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26411): Terminating (SIGTERM) 20:15:11.264477 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26414): Terminating (SIGTERM) 20:15:11.306422 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26417): Terminating (SIGTERM) 20:15:11.316113 --- ParallelTerminationStrategy: PID 26405 died... 20:15:11.372199 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26405): Terminated: ok {rc=0} 20:15:11.382671 --- ParallelTerminationStrategy: PID 26406 died... 20:15:11.438507 run iperf3-srv_10.42.42.10(pid=26406): Terminated {rc=256} 20:15:11.448515 --- ParallelTerminationStrategy: PID 26407 died... 20:15:11.504425 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26407): Terminated: ok {rc=0} 20:15:11.514473 --- ParallelTerminationStrategy: PID 26408 died... 20:15:11.570358 run iperf3-srv_10.42.42.10(pid=26408): Terminated {rc=256} 20:15:11.580481 --- ParallelTerminationStrategy: PID 26411 died... 20:15:11.636402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26411): Terminated: ok {rc=0} 20:15:11.646468 --- ParallelTerminationStrategy: PID 26414 died... 20:15:11.702229 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26414): Terminated: ok {rc=0} 20:15:11.712281 --- ParallelTerminationStrategy: PID 26417 died... 20:15:11.768135 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26417): Terminated: ok {rc=0} 20:15:11.856028 bus /gobi_0: Setting Powered False 20:15:12.966486 bus /gobi_0: Setting Powered False 20:15:14.092270 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26415): Process ended prematurely: osmo-stp_10.42.42.5(pid=26415) [trial-2394↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26415)]