Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=32180): Process ended prematurely: osmo-stp_10.42.42.5(pid=32180) [trial-2394↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32180)]
Standard Output
---------------------------------------------- trial-2394 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 21:02:39.894009 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:02:39.905308 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 21:02:40.040659 tst cs_paging_gprs_active.py: using LAC 36257 21:02:40.161364 tst cs_paging_gprs_active.py: using RAC 47 21:02:40.286252 tst cs_paging_gprs_active.py: using CellId 36257 21:02:40.405179 tst cs_paging_gprs_active.py: using BVCI 36258 21:02:40.428383 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:02:40.439266 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:02:40.449976 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:02:40.460471 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:02:40.471372 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:02:40.482589 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:02:40.493834 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:02:40.504705 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:02:40.515877 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 21:02:40.639383 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 21:02:40.935910 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:02:41.071979 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:02:41.411782 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32170): Launched 21:02:41.693663 run iperf3-srv_10.42.42.10(pid=32171): Launched 21:02:41.893792 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:02:42.030032 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:02:42.367356 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32172): Launched 21:02:42.647528 run iperf3-srv_10.42.42.10(pid=32173): Launched 21:02:42.847869 tst cs_paging_gprs_active.py:38: start network... 21:02:42.984094 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:02:43.507409 run create_hlr_db(pid=32174): Launched 21:02:43.695666 bus /sierra_2: Setting Powered False 21:02:44.717602 run create_hlr_db(pid=32174): Terminated: ok {rc=0} 21:02:45.124772 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32176): Launched 21:02:45.431560 run osmo-hlr_10.42.42.2(pid=32177): Launched 21:02:45.548148 run osmo-stp_10.42.42.5: Starting osmo-stp 21:02:46.122547 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32179): Launched 21:02:46.602606 run osmo-stp_10.42.42.5(pid=32180): Launched 21:02:46.732775 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:02:47.285879 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32182): Launched 21:02:47.395310 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:02:47.661529 run patchelf(pid=32183): Launched 21:02:47.839865 run osmo-stp_10.42.42.5(pid=32180): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32180)] 21:02:47.970653 run osmo-stp_10.42.42.5(pid=32180): stdout: | (launched: 2022-12-13_21:02:46.279907) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:02:48.101188 run osmo-stp_10.42.42.5(pid=32180): stderr: | �[0;m�[38;5;43m20221213210246490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213210246490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213210246490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213210246491 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213210246491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213210246491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213210246491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:02:48.227566 run osmo-stp_10.42.42.5(pid=32180): stdout: | (launched: 2022-12-13_21:02:46.279907) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:02:48.352903 run osmo-stp_10.42.42.5(pid=32180): stderr: | �[0;m�[38;5;43m20221213210246490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213210246490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213210246490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213210246491 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213210246491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213210246491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213210246491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:02:48.498995 run patchelf(pid=32183): Terminating (SIGINT) 21:02:48.671474 run patchelf(pid=32183): Terminated: ok {rc=0} 21:02:48.702881 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32180): Process ended prematurely: osmo-stp_10.42.42.5(pid=32180) [trial-2394↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32180)] [trial-2394↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 21:02:48.712081 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 21:02:48.772472 run osmo-hlr_10.42.42.2(pid=32177): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32177)] 21:02:48.821714 run osmo-hlr_10.42.42.2(pid=32177): stdout: | (launched: 2022-12-13_21:02:45.279992) 21:02:48.871345 run osmo-hlr_10.42.42.2(pid=32177): stderr: | �[0;m�[1;31m20221213210245452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213210245452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213210245452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213210245452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213210245452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213210245452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213210245464 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213210245472 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213210245472 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213210245473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:02:48.913512 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32170): Terminating (SIGTERM) 21:02:48.953185 run iperf3-srv_10.42.42.10(pid=32171): Terminating (SIGTERM) 21:02:48.992835 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32172): Terminating (SIGTERM) 21:02:49.032374 run iperf3-srv_10.42.42.10(pid=32173): Terminating (SIGTERM) 21:02:49.072087 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32176): Terminating (SIGTERM) 21:02:49.111689 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32179): Terminating (SIGTERM) 21:02:49.151332 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32182): Terminating (SIGTERM) 21:02:49.160609 --- ParallelTerminationStrategy: PID 32170 died... 21:02:49.214315 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32170): Terminated: ok {rc=0} 21:02:49.223942 --- ParallelTerminationStrategy: PID 32171 died... 21:02:49.277328 run iperf3-srv_10.42.42.10(pid=32171): Terminated {rc=256} 21:02:49.286929 --- ParallelTerminationStrategy: PID 32172 died... 21:02:49.340171 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32172): Terminated: ok {rc=0} 21:02:49.349866 --- ParallelTerminationStrategy: PID 32173 died... 21:02:49.402945 run iperf3-srv_10.42.42.10(pid=32173): Terminated {rc=256} 21:02:49.412481 --- ParallelTerminationStrategy: PID 32176 died... 21:02:49.465591 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32176): Terminated: ok {rc=0} 21:02:49.475172 --- ParallelTerminationStrategy: PID 32179 died... 21:02:49.528348 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32179): Terminated: ok {rc=0} 21:02:49.537951 --- ParallelTerminationStrategy: PID 32182 died... 21:02:49.591039 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32182): Terminated: ok {rc=0} 21:02:49.678939 bus /gobi_0: Setting Powered False 21:02:50.781490 bus /gobi_0: Setting Powered False 21:02:51.891171 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32180): Process ended prematurely: osmo-stp_10.42.42.5(pid=32180) [trial-2394↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32180)]