Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=30541): Process ended prematurely: osmo-stp_10.42.42.5(pid=30541) [trial-2394↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30541)]
Standard Output
---------------------------------------------- trial-2394 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 20:54:45.505920 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:54:45.516840 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 20:54:45.658528 tst cs_paging_gprs_active.py: using LAC 36215 20:54:45.783902 tst cs_paging_gprs_active.py: using RAC 5 20:54:45.927776 tst cs_paging_gprs_active.py: using CellId 36215 20:54:46.049512 tst cs_paging_gprs_active.py: using BVCI 36216 20:54:46.077331 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:54:46.089209 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:54:46.100982 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:54:46.112520 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:54:46.124805 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:54:46.137139 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:54:46.149589 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:54:46.161700 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 20:54:46.174066 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 20:54:46.298382 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 20:54:46.585418 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:54:46.717745 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:54:47.052079 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30531): Launched 20:54:47.325659 run iperf3-srv_10.42.42.10(pid=30532): Launched 20:54:47.524021 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:54:47.658943 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:54:47.993101 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30533): Launched 20:54:48.270356 run iperf3-srv_10.42.42.10(pid=30534): Launched 20:54:48.467378 tst cs_paging_gprs_active.py:38: start network... 20:54:48.602140 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:54:49.120070 run create_hlr_db(pid=30535): Launched 20:54:49.306273 bus /sierra_2: Setting Powered False 20:54:50.328501 run create_hlr_db(pid=30535): Terminated: ok {rc=0} 20:54:50.734627 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30537): Launched 20:54:51.036539 run osmo-hlr_10.42.42.2(pid=30538): Launched 20:54:51.152398 run osmo-stp_10.42.42.5: Starting osmo-stp 20:54:51.680904 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30540): Launched 20:54:51.984799 run osmo-stp_10.42.42.5(pid=30541): Launched 20:54:52.094922 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:54:52.621345 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30543): Launched 20:54:52.728743 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:54:52.991678 run patchelf(pid=30544): Launched 20:54:53.168435 run osmo-stp_10.42.42.5(pid=30541): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30541)] 20:54:53.297570 run osmo-stp_10.42.42.5(pid=30541): stdout: | (launched: 2022-12-13_20:54:51.834403) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:54:53.426709 run osmo-stp_10.42.42.5(pid=30541): stderr: | �[0;m�[38;5;43m20221213205452000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213205452000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213205452000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213205452001 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213205452001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213205452001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213205452002 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:54:53.552371 run osmo-stp_10.42.42.5(pid=30541): stdout: | (launched: 2022-12-13_20:54:51.834403) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:54:53.676693 run osmo-stp_10.42.42.5(pid=30541): stderr: | �[0;m�[38;5;43m20221213205452000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213205452000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213205452000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213205452001 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213205452001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213205452001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213205452002 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:54:53.821833 run patchelf(pid=30544): Terminating (SIGINT) 20:54:53.992047 run patchelf(pid=30544): Terminated: ok {rc=0} 20:54:54.023189 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30541): Process ended prematurely: osmo-stp_10.42.42.5(pid=30541) [trial-2394↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30541)] [trial-2394↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 20:54:54.032269 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 20:54:54.093079 run osmo-hlr_10.42.42.2(pid=30538): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30538)] 20:54:54.142869 run osmo-hlr_10.42.42.2(pid=30538): stdout: | (launched: 2022-12-13_20:54:50.888455) 20:54:54.193277 run osmo-hlr_10.42.42.2(pid=30538): stderr: | �[0;m�[1;31m20221213205451058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213205451058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213205451058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213205451058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213205451058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213205451058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213205451072 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213205451080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213205451080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213205451080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:54:54.236139 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30531): Terminating (SIGTERM) 20:54:54.276370 run iperf3-srv_10.42.42.10(pid=30532): Terminating (SIGTERM) 20:54:54.316390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30533): Terminating (SIGTERM) 20:54:54.356654 run iperf3-srv_10.42.42.10(pid=30534): Terminating (SIGTERM) 20:54:54.396731 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30537): Terminating (SIGTERM) 20:54:54.436736 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30540): Terminating (SIGTERM) 20:54:54.476844 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30543): Terminating (SIGTERM) 20:54:54.486111 --- ParallelTerminationStrategy: PID 30531 died... 20:54:54.540027 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30531): Terminated: ok {rc=0} 20:54:54.549656 --- ParallelTerminationStrategy: PID 30532 died... 20:54:54.603267 run iperf3-srv_10.42.42.10(pid=30532): Terminated {rc=256} 20:54:54.612703 --- ParallelTerminationStrategy: PID 30533 died... 20:54:54.665990 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30533): Terminated: ok {rc=0} 20:54:54.675442 --- ParallelTerminationStrategy: PID 30534 died... 20:54:54.728934 run iperf3-srv_10.42.42.10(pid=30534): Terminated {rc=256} 20:54:54.738528 --- ParallelTerminationStrategy: PID 30537 died... 20:54:54.791778 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30537): Terminated: ok {rc=0} 20:54:54.801392 --- ParallelTerminationStrategy: PID 30540 died... 20:54:54.854729 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30540): Terminated: ok {rc=0} 20:54:54.864280 --- ParallelTerminationStrategy: PID 30543 died... 20:54:54.917575 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30543): Terminated: ok {rc=0} 20:54:55.005606 bus /gobi_0: Setting Powered False 20:54:56.108431 bus /gobi_0: Setting Powered False 20:54:57.220308 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30541): Process ended prematurely: osmo-stp_10.42.42.5(pid=30541) [trial-2394↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30541)]