Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28862): Process ended prematurely: osmo-stp_10.42.42.5(pid=28862) [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28862)]
Standard Output
---------------------------------------------- trial-2394 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:38:34.029632 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:38:34.041310 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:38:34.183479 tst cs_paging_gprs_active.py: using LAC 36129 20:38:34.305642 tst cs_paging_gprs_active.py: using RAC 174 20:38:34.425057 tst cs_paging_gprs_active.py: using CellId 36129 20:38:34.546483 tst cs_paging_gprs_active.py: using BVCI 36130 20:38:34.570004 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:38:34.580874 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:38:34.591646 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:38:34.602367 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:38:34.613711 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:38:34.624778 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:38:34.635847 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:38:34.647230 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:38:34.658462 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:38:34.780531 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:38:35.061633 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:38:35.189295 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:38:35.505449 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28852): Launched 20:38:35.769191 run iperf3-srv_10.42.42.10(pid=28853): Launched 20:38:35.955009 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:38:36.082459 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:38:36.397862 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28854): Launched 20:38:36.660515 run iperf3-srv_10.42.42.10(pid=28855): Launched 20:38:36.845683 tst cs_paging_gprs_active.py:38: start network... 20:38:36.972445 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:38:37.452484 run create_hlr_db(pid=28856): Launched 20:38:37.627880 bus /gobi_6: Setting Powered False 20:38:38.649670 run create_hlr_db(pid=28856): Terminated: ok {rc=0} 20:38:39.084324 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28858): Launched 20:38:39.411593 run osmo-hlr_10.42.42.2(pid=28859): Launched 20:38:39.530626 run osmo-stp_10.42.42.5: Starting osmo-stp 20:38:40.100398 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28861): Launched 20:38:40.427108 run osmo-stp_10.42.42.5(pid=28862): Launched 20:38:40.544643 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:38:41.117361 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28864): Launched 20:38:41.234629 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:38:41.519234 run patchelf(pid=28865): Launched 20:38:41.710507 run osmo-stp_10.42.42.5(pid=28862): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28862)] 20:38:41.850801 run osmo-stp_10.42.42.5(pid=28862): stdout: | (launched: 2022-12-13_20:38:40.266263) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:38:41.990398 run osmo-stp_10.42.42.5(pid=28862): stderr: | �[0;m�[38;5;43m20221213203840454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213203840454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213203840455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213203840455 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213203840455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213203840456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213203840456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:38:42.125861 run osmo-stp_10.42.42.5(pid=28862): stdout: | (launched: 2022-12-13_20:38:40.266263) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:38:42.260373 run osmo-stp_10.42.42.5(pid=28862): stderr: | �[0;m�[38;5;43m20221213203840454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213203840454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213203840455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213203840455 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213203840455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213203840456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213203840456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:38:42.417103 run patchelf(pid=28865): Terminating (SIGINT) 20:38:42.600906 run patchelf(pid=28865): Terminated: ok {rc=0} 20:38:42.635055 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28862): Process ended prematurely: osmo-stp_10.42.42.5(pid=28862) [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28862)] [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:38:42.645242 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 20:38:42.708923 run osmo-hlr_10.42.42.2(pid=28859): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28859)] 20:38:42.760875 run osmo-hlr_10.42.42.2(pid=28859): stdout: | (launched: 2022-12-13_20:38:39.250787) 20:38:42.813572 run osmo-hlr_10.42.42.2(pid=28859): stderr: | �[0;m�[1;31m20221213203839445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213203839445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213203839445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213203839445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213203839445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213203839445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213203839525 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213203839535 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213203839535 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213203839536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:38:42.858437 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28852): Terminating (SIGTERM) 20:38:42.900631 run iperf3-srv_10.42.42.10(pid=28853): Terminating (SIGTERM) 20:38:42.943121 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28854): Terminating (SIGTERM) 20:38:42.985420 run iperf3-srv_10.42.42.10(pid=28855): Terminating (SIGTERM) 20:38:43.027680 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28858): Terminating (SIGTERM) 20:38:43.070548 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28861): Terminating (SIGTERM) 20:38:43.112735 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28864): Terminating (SIGTERM) 20:38:43.122501 --- ParallelTerminationStrategy: PID 28852 died... 20:38:43.179199 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28852): Terminated: ok {rc=0} 20:38:43.189410 --- ParallelTerminationStrategy: PID 28853 died... 20:38:43.245620 run iperf3-srv_10.42.42.10(pid=28853): Terminated {rc=256} 20:38:43.255775 --- ParallelTerminationStrategy: PID 28854 died... 20:38:43.311756 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28854): Terminated: ok {rc=0} 20:38:43.321963 --- ParallelTerminationStrategy: PID 28855 died... 20:38:43.377705 run iperf3-srv_10.42.42.10(pid=28855): Terminated {rc=256} 20:38:43.387784 --- ParallelTerminationStrategy: PID 28858 died... 20:38:43.443602 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28858): Terminated: ok {rc=0} 20:38:43.454027 --- ParallelTerminationStrategy: PID 28861 died... 20:38:43.509964 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28861): Terminated: ok {rc=0} 20:38:43.520088 --- ParallelTerminationStrategy: PID 28864 died... 20:38:43.576155 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28864): Terminated: ok {rc=0} 20:38:43.662301 bus /gobi_0: Setting Powered False 20:38:44.769021 bus /gobi_0: Setting Powered False 20:38:45.906368 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28862): Process ended prematurely: osmo-stp_10.42.42.5(pid=28862) [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28862)]