Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=10694): Process ended prematurely: osmo-stp_10.42.42.5(pid=10694) [trial-2395↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10694)]
Standard Output
---------------------------------------------- trial-2395 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 22:57:00.059755 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:00.071422 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:57:00.207059 tst cs_paging_gprs_active.py: using LAC 36804 22:57:00.323321 tst cs_paging_gprs_active.py: using RAC 84 22:57:00.440119 tst cs_paging_gprs_active.py: using CellId 36804 22:57:00.555989 tst cs_paging_gprs_active.py: using BVCI 36805 22:57:00.579390 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:00.590759 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:00.601949 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:00.613116 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:00.624810 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:00.636479 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:00.648310 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:00.659944 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:00.671839 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:00.793352 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:01.126465 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:57:01.263974 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:01.621116 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10684): Launched 22:57:01.924380 run iperf3-srv_10.42.42.10(pid=10685): Launched 22:57:02.125403 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:57:02.259861 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:02.592226 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10686): Launched 22:57:02.866856 run iperf3-srv_10.42.42.10(pid=10687): Launched 22:57:03.062318 tst cs_paging_gprs_active.py:38: start network... 22:57:03.195505 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:57:03.729363 run create_hlr_db(pid=10688): Launched 22:57:03.903355 bus /gobi_6: Setting Powered False 22:57:04.925633 run create_hlr_db(pid=10688): Terminated: ok {rc=0} 22:57:05.351687 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10690): Launched 22:57:05.671841 run osmo-hlr_10.42.42.2(pid=10691): Launched 22:57:05.792678 run osmo-stp_10.42.42.5: Starting osmo-stp 22:57:06.349335 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10693): Launched 22:57:06.670703 run osmo-stp_10.42.42.5(pid=10694): Launched 22:57:06.787082 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:57:07.347545 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10696): Launched 22:57:07.462548 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:57:07.741945 run patchelf(pid=10697): Launched 22:57:07.929451 run osmo-stp_10.42.42.5(pid=10694): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10694)] 22:57:08.066730 run osmo-stp_10.42.42.5(pid=10694): stdout: | (launched: 2022-12-13_22:57:06.512496) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:57:08.204360 run osmo-stp_10.42.42.5(pid=10694): stderr: | �[0;m�[38;5;43m20221213225706703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213225706703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213225706703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213225706703 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213225706706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213225706706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213225706706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:57:08.336804 run osmo-stp_10.42.42.5(pid=10694): stdout: | (launched: 2022-12-13_22:57:06.512496) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:57:08.468461 run osmo-stp_10.42.42.5(pid=10694): stderr: | �[0;m�[38;5;43m20221213225706703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213225706703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213225706703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213225706703 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213225706706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213225706706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213225706706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:57:08.621700 run patchelf(pid=10697): Terminating (SIGINT) 22:57:08.801451 run patchelf(pid=10697): Terminated: ok {rc=0} 22:57:08.834654 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10694): Process ended prematurely: osmo-stp_10.42.42.5(pid=10694) [trial-2395↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10694)] [trial-2395↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 22:57:08.844607 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 22:57:08.908366 run osmo-hlr_10.42.42.2(pid=10691): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10691)] 22:57:08.960134 run osmo-hlr_10.42.42.2(pid=10691): stdout: | (launched: 2022-12-13_22:57:05.514733) 22:57:09.012394 run osmo-hlr_10.42.42.2(pid=10691): stderr: | �[0;m�[1;31m20221213225705714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213225705714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213225705714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213225705714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213225705714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213225705714 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213225705726 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213225705736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213225705737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213225705737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:57:09.056741 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10684): Terminating (SIGTERM) 22:57:09.098664 run iperf3-srv_10.42.42.10(pid=10685): Terminating (SIGTERM) 22:57:09.141494 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10686): Terminating (SIGTERM) 22:57:09.183529 run iperf3-srv_10.42.42.10(pid=10687): Terminating (SIGTERM) 22:57:09.225777 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10690): Terminating (SIGTERM) 22:57:09.267761 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10693): Terminating (SIGTERM) 22:57:09.310420 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10696): Terminating (SIGTERM) 22:57:09.320371 --- ParallelTerminationStrategy: PID 10684 died... 22:57:09.376828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10684): Terminated: ok {rc=0} 22:57:09.386744 --- ParallelTerminationStrategy: PID 10685 died... 22:57:09.442534 run iperf3-srv_10.42.42.10(pid=10685): Terminated {rc=256} 22:57:09.452367 --- ParallelTerminationStrategy: PID 10686 died... 22:57:09.508058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10686): Terminated: ok {rc=0} 22:57:09.517918 --- ParallelTerminationStrategy: PID 10687 died... 22:57:09.573408 run iperf3-srv_10.42.42.10(pid=10687): Terminated {rc=256} 22:57:09.583266 --- ParallelTerminationStrategy: PID 10690 died... 22:57:09.639228 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10690): Terminated: ok {rc=0} 22:57:09.649379 --- ParallelTerminationStrategy: PID 10693 died... 22:57:09.705080 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10693): Terminated: ok {rc=0} 22:57:09.715002 --- ParallelTerminationStrategy: PID 10696 died... 22:57:09.770988 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10696): Terminated: ok {rc=0} 22:57:09.858062 bus /gobi_0: Setting Powered False 22:57:10.961875 bus /gobi_0: Setting Powered False 22:57:12.072881 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10694): Process ended prematurely: osmo-stp_10.42.42.5(pid=10694) [trial-2395↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10694)]