Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=6174): Process ended prematurely: osmo-stp_10.42.42.5(pid=6174) [trial-2395↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6174)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 22:07:45.649195 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:45.660484 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:07:45.800064 tst cs_paging_gprs_active.py: using LAC 36543 22:07:45.943699 tst cs_paging_gprs_active.py: using RAC 78 22:07:46.088391 tst cs_paging_gprs_active.py: using CellId 36543 22:07:46.232793 tst cs_paging_gprs_active.py: using BVCI 36544 22:07:46.256774 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:46.268700 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:46.280383 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:46.292170 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:46.304066 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:46.315746 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:46.328939 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:46.341690 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:46.354932 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:07:46.479009 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:07:46.773198 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:07:46.908323 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:07:47.248307 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6164): Launched 22:07:47.512569 run iperf3-srv_10.42.42.10(pid=6165): Launched 22:07:47.699385 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:07:47.826359 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:07:48.143767 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6166): Launched 22:07:48.407012 run iperf3-srv_10.42.42.10(pid=6167): Launched 22:07:48.593317 tst cs_paging_gprs_active.py:38: start network... 22:07:48.720327 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:07:49.206586 run create_hlr_db(pid=6168): Launched 22:07:49.381653 bus /gobi_6: Setting Powered False 22:07:50.404118 run create_hlr_db(pid=6168): Terminated: ok {rc=0} 22:07:50.808529 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6170): Launched 22:07:51.114906 run osmo-hlr_10.42.42.2(pid=6171): Launched 22:07:51.235847 run osmo-stp_10.42.42.5: Starting osmo-stp 22:07:51.772036 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6173): Launched 22:07:52.100345 run osmo-stp_10.42.42.5(pid=6174): Launched 22:07:52.211558 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:07:52.743600 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6176): Launched 22:07:52.852236 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:07:53.117342 run patchelf(pid=6177): Launched 22:07:53.295672 run osmo-stp_10.42.42.5(pid=6174): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6174)] 22:07:53.426415 run osmo-stp_10.42.42.5(pid=6174): stdout: | (launched: 2022-12-13_22:07:51.950129) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:07:53.557236 run osmo-stp_10.42.42.5(pid=6174): stderr: | �[0;m�[38;5;43m20221213220752120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220752120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220752120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220752121 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220752121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220752121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220752121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:07:53.683448 run osmo-stp_10.42.42.5(pid=6174): stdout: | (launched: 2022-12-13_22:07:51.950129) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:07:53.808261 run osmo-stp_10.42.42.5(pid=6174): stderr: | �[0;m�[38;5;43m20221213220752120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220752120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220752120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220752121 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220752121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220752121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220752121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:07:53.953758 run patchelf(pid=6177): Terminating (SIGINT) 22:07:54.124444 run patchelf(pid=6177): Terminated: ok {rc=0} 22:07:54.155980 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6174): Process ended prematurely: osmo-stp_10.42.42.5(pid=6174) [trial-2395↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6174)] [trial-2395↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 22:07:54.165086 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 22:07:54.224870 run osmo-hlr_10.42.42.2(pid=6171): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6171)] 22:07:54.274392 run osmo-hlr_10.42.42.2(pid=6171): stdout: | (launched: 2022-12-13_22:07:50.964941) 22:07:54.324048 run osmo-hlr_10.42.42.2(pid=6171): stderr: | �[0;m�[1;31m20221213220751142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213220751142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213220751142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213220751142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213220751142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213220751142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213220751154 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213220751163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213220751164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213220751164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:07:54.366157 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6164): Terminating (SIGTERM) 22:07:54.405548 run iperf3-srv_10.42.42.10(pid=6165): Terminating (SIGTERM) 22:07:54.445166 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6166): Terminating (SIGTERM) 22:07:54.484533 run iperf3-srv_10.42.42.10(pid=6167): Terminating (SIGTERM) 22:07:54.524086 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6170): Terminating (SIGTERM) 22:07:54.563580 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6173): Terminating (SIGTERM) 22:07:54.603183 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6176): Terminating (SIGTERM) 22:07:54.612232 --- ParallelTerminationStrategy: PID 6164 died... 22:07:54.664609 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6164): Terminated: ok {rc=0} 22:07:54.674007 --- ParallelTerminationStrategy: PID 6165 died... 22:07:54.726193 run iperf3-srv_10.42.42.10(pid=6165): Terminated {rc=256} 22:07:54.735534 --- ParallelTerminationStrategy: PID 6166 died... 22:07:54.787852 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6166): Terminated: ok {rc=0} 22:07:54.797254 --- ParallelTerminationStrategy: PID 6167 died... 22:07:54.849416 run iperf3-srv_10.42.42.10(pid=6167): Terminated {rc=256} 22:07:54.858799 --- ParallelTerminationStrategy: PID 6170 died... 22:07:54.911118 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6170): Terminated: ok {rc=0} 22:07:54.920496 --- ParallelTerminationStrategy: PID 6173 died... 22:07:54.972877 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6173): Terminated: ok {rc=0} 22:07:54.982270 --- ParallelTerminationStrategy: PID 6176 died... 22:07:55.034615 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6176): Terminated: ok {rc=0} 22:07:55.118445 bus /gobi_0: Setting Powered False 22:07:56.225646 bus /gobi_0: Setting Powered False 22:07:57.333211 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6174): Process ended prematurely: osmo-stp_10.42.42.5(pid=6174) [trial-2395↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6174)]