Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=6107): Process ended prematurely: osmo-stp_10.42.42.5(pid=6107) [trial-2395↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6107)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 22:06:44.676088 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:44.687103 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 22:06:44.831180 tst cs_paging_gprs_active.py: using LAC 36538 22:06:44.954672 tst cs_paging_gprs_active.py: using RAC 73 22:06:45.077346 tst cs_paging_gprs_active.py: using CellId 36538 22:06:45.197280 tst cs_paging_gprs_active.py: using BVCI 36539 22:06:45.220706 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:45.231483 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:45.241905 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:45.252406 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:45.262736 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:45.273509 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:45.284533 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:45.294832 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:45.305813 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 22:06:45.426518 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 22:06:45.724552 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:06:45.866817 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:06:46.223709 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6097): Launched 22:06:46.529567 run iperf3-srv_10.42.42.10(pid=6098): Launched 22:06:46.726021 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:06:46.859615 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:06:47.209445 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6099): Launched 22:06:47.491663 run iperf3-srv_10.42.42.10(pid=6100): Launched 22:06:47.693331 tst cs_paging_gprs_active.py:38: start network... 22:06:47.830943 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:06:48.346624 run create_hlr_db(pid=6101): Launched 22:06:48.536888 bus /sierra_2: Setting Powered False 22:06:49.557160 run create_hlr_db(pid=6101): Terminated: ok {rc=0} 22:06:49.991604 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6103): Launched 22:06:50.318903 run osmo-hlr_10.42.42.2(pid=6104): Launched 22:06:50.439734 run osmo-stp_10.42.42.5: Starting osmo-stp 22:06:51.004431 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6106): Launched 22:06:51.333243 run osmo-stp_10.42.42.5(pid=6107): Launched 22:06:51.452408 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:06:52.021621 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6109): Launched 22:06:52.138364 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:06:52.423812 run patchelf(pid=6110): Launched 22:06:52.614411 run osmo-stp_10.42.42.5(pid=6107): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6107)] 22:06:52.753922 run osmo-stp_10.42.42.5(pid=6107): stdout: | (launched: 2022-12-13_22:06:51.170726) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:06:52.893542 run osmo-stp_10.42.42.5(pid=6107): stderr: | �[0;m�[38;5;43m20221213220651362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220651362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220651362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220651363 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220651363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220651363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220651363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:06:53.028535 run osmo-stp_10.42.42.5(pid=6107): stdout: | (launched: 2022-12-13_22:06:51.170726) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:06:53.162824 run osmo-stp_10.42.42.5(pid=6107): stderr: | �[0;m�[38;5;43m20221213220651362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220651362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220651362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220651363 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220651363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220651363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220651363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:06:53.319285 run patchelf(pid=6110): Terminating (SIGINT) 22:06:53.502187 run patchelf(pid=6110): Terminated: ok {rc=0} 22:06:53.535703 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6107): Process ended prematurely: osmo-stp_10.42.42.5(pid=6107) [trial-2395↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6107)] [trial-2395↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 22:06:53.545789 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 22:06:53.609256 run osmo-hlr_10.42.42.2(pid=6104): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6104)] 22:06:53.661200 run osmo-hlr_10.42.42.2(pid=6104): stdout: | (launched: 2022-12-13_22:06:50.157671) 22:06:53.713496 run osmo-hlr_10.42.42.2(pid=6104): stderr: | �[0;m�[1;31m20221213220650356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213220650356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213220650356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213220650356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213220650356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213220650356 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213220650367 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213220650376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213220650376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213220650376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:06:53.758391 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6097): Terminating (SIGTERM) 22:06:53.801107 run iperf3-srv_10.42.42.10(pid=6098): Terminating (SIGTERM) 22:06:53.843955 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6099): Terminating (SIGTERM) 22:06:53.886403 run iperf3-srv_10.42.42.10(pid=6100): Terminating (SIGTERM) 22:06:53.928849 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6103): Terminating (SIGTERM) 22:06:53.971145 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6106): Terminating (SIGTERM) 22:06:54.013909 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6109): Terminating (SIGTERM) 22:06:54.023566 --- ParallelTerminationStrategy: PID 6097 died... 22:06:54.080218 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6097): Terminated: ok {rc=0} 22:06:54.090315 --- ParallelTerminationStrategy: PID 6098 died... 22:06:54.146576 run iperf3-srv_10.42.42.10(pid=6098): Terminated {rc=256} 22:06:54.156546 --- ParallelTerminationStrategy: PID 6099 died... 22:06:54.212866 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6099): Terminated: ok {rc=0} 22:06:54.222868 --- ParallelTerminationStrategy: PID 6100 died... 22:06:54.278993 run iperf3-srv_10.42.42.10(pid=6100): Terminated {rc=256} 22:06:54.288927 --- ParallelTerminationStrategy: PID 6103 died... 22:06:54.345601 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6103): Terminated: ok {rc=0} 22:06:54.355734 --- ParallelTerminationStrategy: PID 6106 died... 22:06:54.412090 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6106): Terminated: ok {rc=0} 22:06:54.422103 --- ParallelTerminationStrategy: PID 6109 died... 22:06:54.478401 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6109): Terminated: ok {rc=0} 22:06:54.565380 bus /gobi_0: Setting Powered False 22:06:55.669524 bus /gobi_0: Setting Powered False 22:06:56.780675 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6107): Process ended prematurely: osmo-stp_10.42.42.5(pid=6107) [trial-2395↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6107)]