Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=12293): Process ended prematurely: osmo-stp_10.42.42.5(pid=12293) [trial-2396↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12293)]
Standard Output
---------------------------------------------- trial-2396 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 23:19:41.661645 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:41.673155 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 23:19:41.831046 tst cs_paging_gprs_active.py: using LAC 36921 23:19:41.959013 tst cs_paging_gprs_active.py: using RAC 201 23:19:42.085718 tst cs_paging_gprs_active.py: using CellId 36921 23:19:42.206221 tst cs_paging_gprs_active.py: using BVCI 36922 23:19:42.230116 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:42.241134 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:42.252015 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:42.262918 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:42.274250 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:42.285575 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:42.296879 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:42.308041 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:19:42.319418 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:19:42.443099 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:19:42.731750 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:19:42.861609 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:19:43.184870 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12283): Launched 23:19:43.452573 run iperf3-srv_10.42.42.10(pid=12284): Launched 23:19:43.642332 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:19:43.771597 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:19:44.093921 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12285): Launched 23:19:44.361668 run iperf3-srv_10.42.42.10(pid=12286): Launched 23:19:44.551712 tst cs_paging_gprs_active.py:38: start network... 23:19:44.681696 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:19:45.178231 run create_hlr_db(pid=12287): Launched 23:19:45.356097 bus /gobi_6: Setting Powered False 23:19:46.391411 run create_hlr_db(pid=12287): Terminated: ok {rc=0} 23:19:46.830939 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12289): Launched 23:19:47.214965 run osmo-hlr_10.42.42.2(pid=12290): Launched 23:19:47.332678 run osmo-stp_10.42.42.5: Starting osmo-stp 23:19:47.873706 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12292): Launched 23:19:48.185025 run osmo-stp_10.42.42.5(pid=12293): Launched 23:19:48.297017 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:19:48.839716 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12295): Launched 23:19:48.950308 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:19:49.222484 run patchelf(pid=12296): Launched 23:19:49.403107 run osmo-stp_10.42.42.5(pid=12293): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12293)] 23:19:49.535489 run osmo-stp_10.42.42.5(pid=12293): stdout: | (launched: 2022-12-13_23:19:48.030744) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:19:49.668120 run osmo-stp_10.42.42.5(pid=12293): stderr: | �[0;m�[38;5;43m20221213231948207 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213231948207 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213231948207 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213231948208 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213231948208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213231948208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213231948209 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:19:49.796143 run osmo-stp_10.42.42.5(pid=12293): stdout: | (launched: 2022-12-13_23:19:48.030744) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:19:49.922846 run osmo-stp_10.42.42.5(pid=12293): stderr: | �[0;m�[38;5;43m20221213231948207 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213231948207 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213231948207 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213231948208 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213231948208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213231948208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213231948209 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:19:50.070466 run patchelf(pid=12296): Terminating (SIGINT) 23:19:50.243744 run patchelf(pid=12296): Terminated: ok {rc=0} 23:19:50.275720 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12293): Process ended prematurely: osmo-stp_10.42.42.5(pid=12293) [trial-2396↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12293)] [trial-2396↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 23:19:50.285168 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 23:19:50.344850 run osmo-hlr_10.42.42.2(pid=12290): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12290)] 23:19:50.393675 run osmo-hlr_10.42.42.2(pid=12290): stdout: | (launched: 2022-12-13_23:19:46.991590) 23:19:50.443149 run osmo-hlr_10.42.42.2(pid=12290): stderr: | �[0;m�[1;31m20221213231947250 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213231947250 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213231947250 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213231947250 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213231947250 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213231947250 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213231947279 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213231947289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213231947289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213231947289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:19:50.485211 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12283): Terminating (SIGTERM) 23:19:50.525039 run iperf3-srv_10.42.42.10(pid=12284): Terminating (SIGTERM) 23:19:50.564547 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12285): Terminating (SIGTERM) 23:19:50.603953 run iperf3-srv_10.42.42.10(pid=12286): Terminating (SIGTERM) 23:19:50.643506 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12289): Terminating (SIGTERM) 23:19:50.682902 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12292): Terminating (SIGTERM) 23:19:50.722287 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12295): Terminating (SIGTERM) 23:19:50.731404 --- ParallelTerminationStrategy: PID 12283 died... 23:19:50.784739 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12283): Terminated: ok {rc=0} 23:19:50.794399 --- ParallelTerminationStrategy: PID 12284 died... 23:19:50.847041 run iperf3-srv_10.42.42.10(pid=12284): Terminated {rc=256} 23:19:50.856581 --- ParallelTerminationStrategy: PID 12285 died... 23:19:50.909255 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12285): Terminated: ok {rc=0} 23:19:50.918689 --- ParallelTerminationStrategy: PID 12286 died... 23:19:50.971410 run iperf3-srv_10.42.42.10(pid=12286): Terminated {rc=256} 23:19:50.981090 --- ParallelTerminationStrategy: PID 12289 died... 23:19:51.033803 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12289): Terminated: ok {rc=0} 23:19:51.043265 --- ParallelTerminationStrategy: PID 12292 died... 23:19:51.096265 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12292): Terminated: ok {rc=0} 23:19:51.105850 --- ParallelTerminationStrategy: PID 12295 died... 23:19:51.158933 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12295): Terminated: ok {rc=0} 23:19:51.242581 bus /gobi_0: Setting Powered False 23:19:52.349382 bus /gobi_0: Setting Powered False 23:19:53.461467 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12293): Process ended prematurely: osmo-stp_10.42.42.5(pid=12293) [trial-2396↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12293)]