Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=13718): Process ended prematurely: osmo-stp_10.42.42.5(pid=13718) [trial-2396↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13718)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 23:36:01.882977 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:36:01.898378 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 23:36:02.095510 tst cs_paging_gprs_active.py: using LAC 37009 23:36:02.245970 tst cs_paging_gprs_active.py: using RAC 34 23:36:02.372265 tst cs_paging_gprs_active.py: using CellId 37009 23:36:02.496507 tst cs_paging_gprs_active.py: using BVCI 37010 23:36:02.520747 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:36:02.532032 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:36:02.543146 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:36:02.554193 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:36:02.565965 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:36:02.577963 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:36:02.589996 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:36:02.601807 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:36:02.613847 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:36:02.734254 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:36:03.028202 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:36:03.162467 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:36:03.492252 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13708): Launched 23:36:03.766391 run iperf3-srv_10.42.42.10(pid=13709): Launched 23:36:03.962969 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:36:04.097921 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:36:04.427602 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13710): Launched 23:36:04.700833 run iperf3-srv_10.42.42.10(pid=13711): Launched 23:36:04.896405 tst cs_paging_gprs_active.py:38: start network... 23:36:05.030567 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:36:05.530999 run create_hlr_db(pid=13712): Launched 23:36:05.716312 bus /gobi_6: Setting Powered False 23:36:06.737955 run create_hlr_db(pid=13712): Terminated: ok {rc=0} 23:36:07.162913 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13714): Launched 23:36:07.482990 run osmo-hlr_10.42.42.2(pid=13715): Launched 23:36:07.604534 run osmo-stp_10.42.42.5: Starting osmo-stp 23:36:08.129461 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13717): Launched 23:36:08.429039 run osmo-stp_10.42.42.5(pid=13718): Launched 23:36:08.538352 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:36:09.057336 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13720): Launched 23:36:09.163835 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:36:09.424610 run patchelf(pid=13721): Launched 23:36:09.599284 run osmo-stp_10.42.42.5(pid=13718): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13718)] 23:36:09.727486 run osmo-stp_10.42.42.5(pid=13718): stdout: | (launched: 2022-12-13_23:36:08.282046) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:36:09.856526 run osmo-stp_10.42.42.5(pid=13718): stderr: | �[0;m�[38;5;43m20221213233608452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213233608452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213233608452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213233608453 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213233608453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213233608453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213233608453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:36:09.980364 run osmo-stp_10.42.42.5(pid=13718): stdout: | (launched: 2022-12-13_23:36:08.282046) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:36:10.103306 run osmo-stp_10.42.42.5(pid=13718): stderr: | �[0;m�[38;5;43m20221213233608452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213233608452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213233608452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213233608453 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213233608453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213233608453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213233608453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:36:10.245990 run patchelf(pid=13721): Terminating (SIGINT) 23:36:10.415030 run patchelf(pid=13721): Terminated: ok {rc=0} 23:36:10.445855 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13718): Process ended prematurely: osmo-stp_10.42.42.5(pid=13718) [trial-2396↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13718)] [trial-2396↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 23:36:10.454905 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 23:36:10.514959 run osmo-hlr_10.42.42.2(pid=13715): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13715)] 23:36:10.564108 run osmo-hlr_10.42.42.2(pid=13715): stdout: | (launched: 2022-12-13_23:36:07.326234) 23:36:10.613860 run osmo-hlr_10.42.42.2(pid=13715): stderr: | �[0;m�[1;31m20221213233607524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213233607524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213233607524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213233607524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213233607524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213233607524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213233607537 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213233607545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213233607545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213233607545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:36:10.656038 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13708): Terminating (SIGTERM) 23:36:10.695783 run iperf3-srv_10.42.42.10(pid=13709): Terminating (SIGTERM) 23:36:10.735505 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13710): Terminating (SIGTERM) 23:36:10.774884 run iperf3-srv_10.42.42.10(pid=13711): Terminating (SIGTERM) 23:36:10.818260 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13714): Terminating (SIGTERM) 23:36:10.861047 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13717): Terminating (SIGTERM) 23:36:10.903602 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13720): Terminating (SIGTERM) 23:36:10.912900 --- ParallelTerminationStrategy: PID 13708 died... 23:36:10.971133 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13708): Terminated: ok {rc=0} 23:36:10.981348 --- ParallelTerminationStrategy: PID 13709 died... 23:36:11.038862 run iperf3-srv_10.42.42.10(pid=13709): Terminated {rc=256} 23:36:11.048798 --- ParallelTerminationStrategy: PID 13710 died... 23:36:11.106331 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13710): Terminated: ok {rc=0} 23:36:11.116257 --- ParallelTerminationStrategy: PID 13711 died... 23:36:11.173145 run iperf3-srv_10.42.42.10(pid=13711): Terminated {rc=256} 23:36:11.183123 --- ParallelTerminationStrategy: PID 13714 died... 23:36:11.240603 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13714): Terminated: ok {rc=0} 23:36:11.250747 --- ParallelTerminationStrategy: PID 13717 died... 23:36:11.308311 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13717): Terminated: ok {rc=0} 23:36:11.318448 --- ParallelTerminationStrategy: PID 13720 died... 23:36:11.375738 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13720): Terminated: ok {rc=0} 23:36:11.463081 bus /gobi_0: Setting Powered False 23:36:12.568660 bus /gobi_0: Setting Powered False 23:36:13.676082 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13718): Process ended prematurely: osmo-stp_10.42.42.5(pid=13718) [trial-2396↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13718)]