Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=17058): Process ended prematurely: osmo-stp_10.42.42.5(pid=17058) [trial-2396↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17058)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 00:07:38.957047 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:38.968344 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 00:07:39.110054 tst cs_paging_gprs_active.py: using LAC 37179 00:07:39.238302 tst cs_paging_gprs_active.py: using RAC 204 00:07:39.365398 tst cs_paging_gprs_active.py: using CellId 37179 00:07:39.493393 tst cs_paging_gprs_active.py: using BVCI 37180 00:07:39.518262 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:39.529617 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:39.540695 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:39.551707 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:39.563042 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:39.574394 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:39.586017 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:39.597289 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:39.608661 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 00:07:39.726278 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 00:07:40.023287 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:07:40.159684 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:07:40.496703 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17048): Launched 00:07:40.776179 run iperf3-srv_10.42.42.10(pid=17049): Launched 00:07:40.976015 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:07:41.111966 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:07:41.448207 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17050): Launched 00:07:41.728354 run iperf3-srv_10.42.42.10(pid=17051): Launched 00:07:41.928380 tst cs_paging_gprs_active.py:38: start network... 00:07:42.064867 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:07:42.575824 run create_hlr_db(pid=17052): Launched 00:07:42.763034 bus /sierra_2: Setting Powered False 00:07:43.785225 run create_hlr_db(pid=17052): Terminated: ok {rc=0} 00:07:44.218130 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17054): Launched 00:07:44.544925 run osmo-hlr_10.42.42.2(pid=17055): Launched 00:07:44.666727 run osmo-stp_10.42.42.5: Starting osmo-stp 00:07:45.229963 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17057): Launched 00:07:45.554651 run osmo-stp_10.42.42.5(pid=17058): Launched 00:07:45.672609 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:07:46.265648 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17060): Launched 00:07:46.378867 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:07:46.667623 run patchelf(pid=17061): Launched 00:07:46.851503 run osmo-stp_10.42.42.5(pid=17058): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17058)] 00:07:46.988367 run osmo-stp_10.42.42.5(pid=17058): stdout: | (launched: 2022-12-14_00:07:45.395153) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:07:47.124492 run osmo-stp_10.42.42.5(pid=17058): stderr: | �[0;m�[38;5;43m20221214000745589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214000745589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214000745590 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214000745590 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214000745590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214000745590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214000745591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:07:47.252922 run osmo-stp_10.42.42.5(pid=17058): stdout: | (launched: 2022-12-14_00:07:45.395153) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:07:47.378906 run osmo-stp_10.42.42.5(pid=17058): stderr: | �[0;m�[38;5;43m20221214000745589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214000745589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214000745590 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214000745590 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214000745590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214000745590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214000745591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:07:47.524051 run patchelf(pid=17061): Terminating (SIGINT) 00:07:47.695324 run patchelf(pid=17061): Terminated: ok {rc=0} 00:07:47.726949 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17058): Process ended prematurely: osmo-stp_10.42.42.5(pid=17058) [trial-2396↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17058)] [trial-2396↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 00:07:47.736248 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 00:07:47.796668 run osmo-hlr_10.42.42.2(pid=17055): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17055)] 00:07:47.845658 run osmo-hlr_10.42.42.2(pid=17055): stdout: | (launched: 2022-12-14_00:07:44.383165) 00:07:47.895174 run osmo-hlr_10.42.42.2(pid=17055): stderr: | �[0;m�[1;31m20221214000744584 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214000744584 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214000744584 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214000744584 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214000744584 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214000744584 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214000744599 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214000744608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214000744608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214000744608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:07:47.937510 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17048): Terminating (SIGTERM) 00:07:47.977026 run iperf3-srv_10.42.42.10(pid=17049): Terminating (SIGTERM) 00:07:48.016643 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17050): Terminating (SIGTERM) 00:07:48.056058 run iperf3-srv_10.42.42.10(pid=17051): Terminating (SIGTERM) 00:07:48.095750 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17054): Terminating (SIGTERM) 00:07:48.135484 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17057): Terminating (SIGTERM) 00:07:48.175235 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17060): Terminating (SIGTERM) 00:07:48.184583 --- ParallelTerminationStrategy: PID 17048 died... 00:07:48.238214 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17048): Terminated: ok {rc=0} 00:07:48.248032 --- ParallelTerminationStrategy: PID 17049 died... 00:07:48.301511 run iperf3-srv_10.42.42.10(pid=17049): Terminated {rc=256} 00:07:48.311223 --- ParallelTerminationStrategy: PID 17050 died... 00:07:48.364442 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17050): Terminated: ok {rc=0} 00:07:48.374299 --- ParallelTerminationStrategy: PID 17051 died... 00:07:48.427321 run iperf3-srv_10.42.42.10(pid=17051): Terminated {rc=256} 00:07:48.437161 --- ParallelTerminationStrategy: PID 17054 died... 00:07:48.490009 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17054): Terminated: ok {rc=0} 00:07:48.499892 --- ParallelTerminationStrategy: PID 17057 died... 00:07:48.552679 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17057): Terminated: ok {rc=0} 00:07:48.562487 --- ParallelTerminationStrategy: PID 17060 died... 00:07:48.615393 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17060): Terminated: ok {rc=0} 00:07:48.702042 bus /gobi_0: Setting Powered False 00:07:49.804322 bus /gobi_0: Setting Powered False 00:07:50.910014 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17058): Process ended prematurely: osmo-stp_10.42.42.5(pid=17058) [trial-2396↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17058)]