Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=14684): Process ended prematurely: osmo-stp_10.42.42.5(pid=14684) [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14684)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 23:45:49.821957 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:49.833130 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:45:49.986949 tst cs_paging_gprs_active.py: using LAC 37061 23:45:50.102273 tst cs_paging_gprs_active.py: using RAC 86 23:45:50.226575 tst cs_paging_gprs_active.py: using CellId 37061 23:45:50.352088 tst cs_paging_gprs_active.py: using BVCI 37062 23:45:50.376479 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:50.387898 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:50.399576 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:50.410921 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:50.422472 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:50.433861 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:50.445523 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:50.457005 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:45:50.468603 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:45:50.585852 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:45:50.878194 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:45:51.011686 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:45:51.340459 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14670): Launched 23:45:51.613533 run iperf3-srv_10.42.42.10(pid=14671): Launched 23:45:51.809520 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:45:51.943849 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:45:52.273907 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14676): Launched 23:45:52.546403 run iperf3-srv_10.42.42.10(pid=14677): Launched 23:45:52.742033 tst cs_paging_gprs_active.py:38: start network... 23:45:52.875533 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:45:53.376461 run create_hlr_db(pid=14678): Launched 23:45:53.560941 bus /gobi_6: Setting Powered False 23:45:54.582928 run create_hlr_db(pid=14678): Terminated: ok {rc=0} 23:45:54.983657 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14680): Launched 23:45:55.281822 run osmo-hlr_10.42.42.2(pid=14681): Launched 23:45:55.402195 run osmo-stp_10.42.42.5: Starting osmo-stp 23:45:55.928544 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14683): Launched 23:45:56.225911 run osmo-stp_10.42.42.5(pid=14684): Launched 23:45:56.335107 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:45:56.852646 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14686): Launched 23:45:56.959416 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:45:57.218288 run patchelf(pid=14687): Launched 23:45:57.392577 run osmo-stp_10.42.42.5(pid=14684): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14684)] 23:45:57.520371 run osmo-stp_10.42.42.5(pid=14684): stdout: | (launched: 2022-12-13_23:45:56.080089) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:45:57.648482 run osmo-stp_10.42.42.5(pid=14684): stderr: | �[0;m�[38;5;43m20221213234556249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213234556249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213234556249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213234556249 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213234556251 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213234556252 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213234556252 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:45:57.771869 run osmo-stp_10.42.42.5(pid=14684): stdout: | (launched: 2022-12-13_23:45:56.080089) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:45:57.894003 run osmo-stp_10.42.42.5(pid=14684): stderr: | �[0;m�[38;5;43m20221213234556249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213234556249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213234556249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213234556249 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213234556251 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213234556252 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213234556252 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:45:58.036218 run patchelf(pid=14687): Terminating (SIGINT) 23:45:58.203842 run patchelf(pid=14687): Terminated: ok {rc=0} 23:45:58.234708 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14684): Process ended prematurely: osmo-stp_10.42.42.5(pid=14684) [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14684)] [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 23:45:58.243818 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 23:45:58.303047 run osmo-hlr_10.42.42.2(pid=14681): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14681)] 23:45:58.351726 run osmo-hlr_10.42.42.2(pid=14681): stdout: | (launched: 2022-12-13_23:45:55.135480) 23:45:58.400983 run osmo-hlr_10.42.42.2(pid=14681): stderr: | �[0;m�[1;31m20221213234555311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213234555311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213234555311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213234555311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213234555312 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213234555312 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213234555324 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213234555335 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213234555335 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213234555335 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:45:58.442638 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14670): Terminating (SIGTERM) 23:45:58.481650 run iperf3-srv_10.42.42.10(pid=14671): Terminating (SIGTERM) 23:45:58.520699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14676): Terminating (SIGTERM) 23:45:58.559479 run iperf3-srv_10.42.42.10(pid=14677): Terminating (SIGTERM) 23:45:58.598492 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14680): Terminating (SIGTERM) 23:45:58.637481 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14683): Terminating (SIGTERM) 23:45:58.676507 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14686): Terminating (SIGTERM) 23:45:58.685545 --- ParallelTerminationStrategy: PID 14670 died... 23:45:58.737922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14670): Terminated: ok {rc=0} 23:45:58.747301 --- ParallelTerminationStrategy: PID 14671 died... 23:45:58.799219 run iperf3-srv_10.42.42.10(pid=14671): Terminated {rc=256} 23:45:58.808504 --- ParallelTerminationStrategy: PID 14676 died... 23:45:58.860653 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14676): Terminated: ok {rc=0} 23:45:58.870008 --- ParallelTerminationStrategy: PID 14677 died... 23:45:58.922118 run iperf3-srv_10.42.42.10(pid=14677): Terminated {rc=256} 23:45:58.931431 --- ParallelTerminationStrategy: PID 14680 died... 23:45:58.984118 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14680): Terminated: ok {rc=0} 23:45:58.993634 --- ParallelTerminationStrategy: PID 14683 died... 23:45:59.045736 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14683): Terminated: ok {rc=0} 23:45:59.055092 --- ParallelTerminationStrategy: PID 14686 died... 23:45:59.107132 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14686): Terminated: ok {rc=0} 23:45:59.193970 bus /gobi_0: Setting Powered False 23:46:00.296187 bus /gobi_0: Setting Powered False 23:46:01.404468 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14684): Process ended prematurely: osmo-stp_10.42.42.5(pid=14684) [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14684)]