Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=25413): Process ended prematurely: osmo-stp_10.42.42.5(pid=25413) [trial-2397↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25413)]
Standard Output
---------------------------------------------- trial-2397 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 01:43:45.303654 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:45.314886 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 01:43:45.446989 tst cs_paging_gprs_active.py: using LAC 37678 01:43:45.573824 tst cs_paging_gprs_active.py: using RAC 193 01:43:45.702791 tst cs_paging_gprs_active.py: using CellId 37678 01:43:45.839067 tst cs_paging_gprs_active.py: using BVCI 37679 01:43:45.877288 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:45.889664 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:45.901951 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:45.914382 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:45.927916 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:45.941049 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:45.954941 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:45.966856 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:45.980717 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 01:43:46.109061 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 01:43:46.441698 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:43:46.580018 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:43:46.933803 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25403): Launched 01:43:47.210506 run iperf3-srv_10.42.42.10(pid=25404): Launched 01:43:47.400455 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:43:47.527096 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:43:47.844299 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25405): Launched 01:43:48.107237 run iperf3-srv_10.42.42.10(pid=25406): Launched 01:43:48.292119 tst cs_paging_gprs_active.py:38: start network... 01:43:48.417763 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:43:48.904809 run create_hlr_db(pid=25407): Launched 01:43:49.078376 bus /sierra_2: Setting Powered False 01:43:50.101013 run create_hlr_db(pid=25407): Terminated: ok {rc=0} 01:43:50.505601 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25409): Launched 01:43:50.808910 run osmo-hlr_10.42.42.2(pid=25410): Launched 01:43:50.918147 run osmo-stp_10.42.42.5: Starting osmo-stp 01:43:51.444902 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25412): Launched 01:43:51.747894 run osmo-stp_10.42.42.5(pid=25413): Launched 01:43:51.856923 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:43:52.386198 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25415): Launched 01:43:52.493423 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:43:52.758494 run patchelf(pid=25416): Launched 01:43:52.935833 run osmo-stp_10.42.42.5(pid=25413): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25413)] 01:43:53.065427 run osmo-stp_10.42.42.5(pid=25413): stdout: | (launched: 2022-12-14_01:43:51.597862) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:43:53.195874 run osmo-stp_10.42.42.5(pid=25413): stderr: | �[0;m�[38;5;43m20221214014351770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214014351770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214014351770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214014351771 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214014351771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214014351771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214014351771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:43:53.320409 run osmo-stp_10.42.42.5(pid=25413): stdout: | (launched: 2022-12-14_01:43:51.597862) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:43:53.443998 run osmo-stp_10.42.42.5(pid=25413): stderr: | �[0;m�[38;5;43m20221214014351770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214014351770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214014351770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214014351771 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214014351771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214014351771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214014351771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:43:53.587890 run patchelf(pid=25416): Terminating (SIGINT) 01:43:53.757630 run patchelf(pid=25416): Terminated: ok {rc=0} 01:43:53.788942 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25413): Process ended prematurely: osmo-stp_10.42.42.5(pid=25413) [trial-2397↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25413)] [trial-2397↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 01:43:53.798414 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 01:43:53.857479 run osmo-hlr_10.42.42.2(pid=25410): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25410)] 01:43:53.905233 run osmo-hlr_10.42.42.2(pid=25410): stdout: | (launched: 2022-12-14_01:43:50.658325) 01:43:53.954129 run osmo-hlr_10.42.42.2(pid=25410): stderr: | �[0;m�[1;31m20221214014350834 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214014350834 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214014350834 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214014350834 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214014350834 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214014350834 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214014350846 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214014350857 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214014350857 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214014350857 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:43:53.995687 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25403): Terminating (SIGTERM) 01:43:54.034827 run iperf3-srv_10.42.42.10(pid=25404): Terminating (SIGTERM) 01:43:54.073910 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25405): Terminating (SIGTERM) 01:43:54.112919 run iperf3-srv_10.42.42.10(pid=25406): Terminating (SIGTERM) 01:43:54.151962 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25409): Terminating (SIGTERM) 01:43:54.190958 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25412): Terminating (SIGTERM) 01:43:54.229958 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25415): Terminating (SIGTERM) 01:43:54.239045 --- ParallelTerminationStrategy: PID 25403 died... 01:43:54.291931 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25403): Terminated: ok {rc=0} 01:43:54.301876 --- ParallelTerminationStrategy: PID 25404 died... 01:43:54.354305 run iperf3-srv_10.42.42.10(pid=25404): Terminated {rc=256} 01:43:54.363676 --- ParallelTerminationStrategy: PID 25405 died... 01:43:54.415897 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25405): Terminated: ok {rc=0} 01:43:54.425464 --- ParallelTerminationStrategy: PID 25406 died... 01:43:54.477388 run iperf3-srv_10.42.42.10(pid=25406): Terminated {rc=256} 01:43:54.486850 --- ParallelTerminationStrategy: PID 25409 died... 01:43:54.539200 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25409): Terminated: ok {rc=0} 01:43:54.548766 --- ParallelTerminationStrategy: PID 25412 died... 01:43:54.601275 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25412): Terminated: ok {rc=0} 01:43:54.610961 --- ParallelTerminationStrategy: PID 25415 died... 01:43:54.663734 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25415): Terminated: ok {rc=0} 01:43:54.747711 bus /gobi_0: Setting Powered False 01:43:55.854366 bus /gobi_0: Setting Powered False 01:43:56.968179 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25413): Process ended prematurely: osmo-stp_10.42.42.5(pid=25413) [trial-2397↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25413)]