Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=21342): Process ended prematurely: osmo-stp_10.42.42.5(pid=21342) [trial-2397↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21342)]
Standard Output
---------------------------------------------- trial-2397 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 00:57:06.212328 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:06.223217 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:57:06.368935 tst cs_paging_gprs_active.py: using LAC 37429 00:57:06.493938 tst cs_paging_gprs_active.py: using RAC 199 00:57:06.626901 tst cs_paging_gprs_active.py: using CellId 37429 00:57:06.753659 tst cs_paging_gprs_active.py: using BVCI 37430 00:57:06.778971 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:06.790521 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:06.801791 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:06.812771 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:06.824037 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:06.835456 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:06.847022 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:06.858346 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:57:06.869932 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:57:06.987578 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:57:07.285357 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:57:07.423206 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:57:07.766894 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21332): Launched 00:57:08.051599 run iperf3-srv_10.42.42.10(pid=21333): Launched 00:57:08.253206 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:57:08.390513 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:57:08.733187 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21334): Launched 00:57:09.018144 run iperf3-srv_10.42.42.10(pid=21335): Launched 00:57:09.219730 tst cs_paging_gprs_active.py:38: start network... 00:57:09.357090 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:57:09.875849 run create_hlr_db(pid=21336): Launched 00:57:10.065692 bus /gobi_6: Setting Powered False 00:57:11.086744 run create_hlr_db(pid=21336): Terminated: ok {rc=0} 00:57:11.527297 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21338): Launched 00:57:11.858530 run osmo-hlr_10.42.42.2(pid=21339): Launched 00:57:11.982359 run osmo-stp_10.42.42.5: Starting osmo-stp 00:57:12.556013 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21341): Launched 00:57:12.886733 run osmo-stp_10.42.42.5(pid=21342): Launched 00:57:13.005907 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:57:13.579758 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21344): Launched 00:57:13.696514 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:57:13.983991 run patchelf(pid=21345): Launched 00:57:14.176181 run osmo-stp_10.42.42.5(pid=21342): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21342)] 00:57:14.316304 run osmo-stp_10.42.42.5(pid=21342): stdout: | (launched: 2022-12-14_00:57:12.723168) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:57:14.457454 run osmo-stp_10.42.42.5(pid=21342): stderr: | �[0;m�[38;5;43m20221214005712916 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214005712916 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214005712916 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214005712917 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214005712917 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214005712917 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214005712917 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:57:14.593066 run osmo-stp_10.42.42.5(pid=21342): stdout: | (launched: 2022-12-14_00:57:12.723168) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:57:14.727242 run osmo-stp_10.42.42.5(pid=21342): stderr: | �[0;m�[38;5;43m20221214005712916 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214005712916 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214005712916 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214005712917 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214005712917 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214005712917 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214005712917 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:57:14.884397 run patchelf(pid=21345): Terminating (SIGINT) 00:57:15.068412 run patchelf(pid=21345): Terminated: ok {rc=0} 00:57:15.102326 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21342): Process ended prematurely: osmo-stp_10.42.42.5(pid=21342) [trial-2397↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21342)] [trial-2397↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 00:57:15.112400 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 00:57:15.176094 run osmo-hlr_10.42.42.2(pid=21339): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21339)] 00:57:15.228314 run osmo-hlr_10.42.42.2(pid=21339): stdout: | (launched: 2022-12-14_00:57:11.694342) 00:57:15.280716 run osmo-hlr_10.42.42.2(pid=21339): stderr: | �[0;m�[1;31m20221214005711893 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214005711893 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214005711893 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214005711893 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214005711893 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214005711893 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214005711906 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214005711914 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214005711914 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214005711914 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:57:15.325476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21332): Terminating (SIGTERM) 00:57:15.367424 run iperf3-srv_10.42.42.10(pid=21333): Terminating (SIGTERM) 00:57:15.410424 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21334): Terminating (SIGTERM) 00:57:15.452635 run iperf3-srv_10.42.42.10(pid=21335): Terminating (SIGTERM) 00:57:15.495384 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21338): Terminating (SIGTERM) 00:57:15.537597 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21341): Terminating (SIGTERM) 00:57:15.579971 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21344): Terminating (SIGTERM) 00:57:15.589537 --- ParallelTerminationStrategy: PID 21332 died... 00:57:15.645708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21332): Terminated: ok {rc=0} 00:57:15.655568 --- ParallelTerminationStrategy: PID 21333 died... 00:57:15.711226 run iperf3-srv_10.42.42.10(pid=21333): Terminated {rc=256} 00:57:15.721179 --- ParallelTerminationStrategy: PID 21334 died... 00:57:15.777050 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21334): Terminated: ok {rc=0} 00:57:15.786928 --- ParallelTerminationStrategy: PID 21335 died... 00:57:15.857882 run iperf3-srv_10.42.42.10(pid=21335): Terminated {rc=256} 00:57:15.869659 --- ParallelTerminationStrategy: PID 21338 died... 00:57:15.944855 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21338): Terminated: ok {rc=0} 00:57:15.955422 --- ParallelTerminationStrategy: PID 21341 died... 00:57:16.022928 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21341): Terminated: ok {rc=0} 00:57:16.033738 --- ParallelTerminationStrategy: PID 21344 died... 00:57:16.090627 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21344): Terminated: ok {rc=0} 00:57:16.180011 bus /gobi_0: Setting Powered False 00:57:17.281896 bus /gobi_0: Setting Powered False 00:57:18.392144 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21342): Process ended prematurely: osmo-stp_10.42.42.5(pid=21342) [trial-2397↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21342)]