Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=21869): Process ended prematurely: osmo-stp_10.42.42.5(pid=21869) [trial-2397↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21869)]
Standard Output
---------------------------------------------- trial-2397 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 01:04:41.794174 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:41.805503 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 01:04:41.966513 tst cs_paging_gprs_active.py: using LAC 37470 01:04:42.087390 tst cs_paging_gprs_active.py: using RAC 240 01:04:42.208703 tst cs_paging_gprs_active.py: using CellId 37470 01:04:42.329384 tst cs_paging_gprs_active.py: using BVCI 37471 01:04:42.352463 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:42.363271 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:42.373854 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:42.384358 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:42.395002 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:42.405595 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:42.416191 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:42.426659 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:42.437383 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:04:42.557872 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:04:42.854152 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:04:42.990214 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:04:43.327262 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21859): Launched 01:04:43.606740 run iperf3-srv_10.42.42.10(pid=21860): Launched 01:04:43.806567 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:04:43.942035 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:04:44.279029 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21861): Launched 01:04:44.559236 run iperf3-srv_10.42.42.10(pid=21862): Launched 01:04:44.759262 tst cs_paging_gprs_active.py:38: start network... 01:04:44.894889 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:04:45.408252 run create_hlr_db(pid=21863): Launched 01:04:45.597398 bus /gobi_6: Setting Powered False 01:04:46.643920 run create_hlr_db(pid=21863): Terminated: ok {rc=0} 01:04:47.140593 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21865): Launched 01:04:47.445033 run osmo-hlr_10.42.42.2(pid=21866): Launched 01:04:47.558668 run osmo-stp_10.42.42.5: Starting osmo-stp 01:04:48.086667 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21868): Launched 01:04:48.389351 run osmo-stp_10.42.42.5(pid=21869): Launched 01:04:48.499356 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:04:49.030282 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21871): Launched 01:04:49.138083 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:04:49.402817 run patchelf(pid=21872): Launched 01:04:49.580664 run osmo-stp_10.42.42.5(pid=21869): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21869)] 01:04:49.711073 run osmo-stp_10.42.42.5(pid=21869): stdout: | (launched: 2022-12-14_01:04:48.239977) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:04:49.841471 run osmo-stp_10.42.42.5(pid=21869): stderr: | �[0;m�[38;5;43m20221214010448407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214010448407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214010448408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214010448408 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214010448409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214010448409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214010448409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:04:49.967012 run osmo-stp_10.42.42.5(pid=21869): stdout: | (launched: 2022-12-14_01:04:48.239977) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:04:50.091351 run osmo-stp_10.42.42.5(pid=21869): stderr: | �[0;m�[38;5;43m20221214010448407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214010448407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214010448408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214010448408 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214010448409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214010448409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214010448409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:04:50.235642 run patchelf(pid=21872): Terminating (SIGINT) 01:04:50.405459 run patchelf(pid=21872): Terminated: ok {rc=0} 01:04:50.436692 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21869): Process ended prematurely: osmo-stp_10.42.42.5(pid=21869) [trial-2397↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21869)] [trial-2397↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 01:04:50.445897 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 01:04:50.505616 run osmo-hlr_10.42.42.2(pid=21866): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21866)] 01:04:50.554571 run osmo-hlr_10.42.42.2(pid=21866): stdout: | (launched: 2022-12-14_01:04:47.295521) 01:04:50.603963 run osmo-hlr_10.42.42.2(pid=21866): stderr: | �[0;m�[1;31m20221214010447468 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214010447468 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214010447468 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214010447468 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214010447468 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214010447468 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214010447481 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214010447490 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214010447491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214010447491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:04:50.645913 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21859): Terminating (SIGTERM) 01:04:50.685244 run iperf3-srv_10.42.42.10(pid=21860): Terminating (SIGTERM) 01:04:50.724487 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21861): Terminating (SIGTERM) 01:04:50.763507 run iperf3-srv_10.42.42.10(pid=21862): Terminating (SIGTERM) 01:04:50.802624 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21865): Terminating (SIGTERM) 01:04:50.841743 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21868): Terminating (SIGTERM) 01:04:50.880799 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21871): Terminating (SIGTERM) 01:04:50.889872 --- ParallelTerminationStrategy: PID 21859 died... 01:04:50.942513 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21859): Terminated: ok {rc=0} 01:04:50.951840 --- ParallelTerminationStrategy: PID 21860 died... 01:04:51.003849 run iperf3-srv_10.42.42.10(pid=21860): Terminated {rc=256} 01:04:51.013267 --- ParallelTerminationStrategy: PID 21861 died... 01:04:51.065402 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21861): Terminated: ok {rc=0} 01:04:51.074690 --- ParallelTerminationStrategy: PID 21862 died... 01:04:51.126627 run iperf3-srv_10.42.42.10(pid=21862): Terminated {rc=256} 01:04:51.135850 --- ParallelTerminationStrategy: PID 21865 died... 01:04:51.187644 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21865): Terminated: ok {rc=0} 01:04:51.197017 --- ParallelTerminationStrategy: PID 21868 died... 01:04:51.248857 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21868): Terminated: ok {rc=0} 01:04:51.258213 --- ParallelTerminationStrategy: PID 21871 died... 01:04:51.310160 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21871): Terminated: ok {rc=0} 01:04:51.397490 bus /gobi_0: Setting Powered False 01:04:52.502196 bus /gobi_0: Setting Powered False 01:04:53.614535 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21869): Process ended prematurely: osmo-stp_10.42.42.5(pid=21869) [trial-2397↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21869)]