Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=21940): Process ended prematurely: osmo-stp_10.42.42.5(pid=21940) [trial-2397↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21940)]
Standard Output
---------------------------------------------- trial-2397 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 01:05:41.447277 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:41.458227 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 01:05:41.614126 tst cs_paging_gprs_active.py: using LAC 37475 01:05:41.736594 tst cs_paging_gprs_active.py: using RAC 245 01:05:41.863207 tst cs_paging_gprs_active.py: using CellId 37475 01:05:42.007077 tst cs_paging_gprs_active.py: using BVCI 37476 01:05:42.032057 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:42.043411 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:42.054686 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:42.065896 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:42.077416 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:42.088829 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:42.100441 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:42.111878 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:05:42.123453 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:05:42.240456 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:05:42.537521 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:05:42.674638 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:05:43.013253 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21930): Launched 01:05:43.294207 run iperf3-srv_10.42.42.10(pid=21931): Launched 01:05:43.494702 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:05:43.630535 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:05:43.969388 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21932): Launched 01:05:44.249763 run iperf3-srv_10.42.42.10(pid=21933): Launched 01:05:44.449565 tst cs_paging_gprs_active.py:38: start network... 01:05:44.585419 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:05:45.098504 run create_hlr_db(pid=21934): Launched 01:05:45.287254 bus /gobi_6: Setting Powered False 01:05:46.353575 run create_hlr_db(pid=21934): Terminated: ok {rc=0} 01:05:46.809984 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21936): Launched 01:05:47.250803 run osmo-hlr_10.42.42.2(pid=21937): Launched 01:05:47.375024 run osmo-stp_10.42.42.5: Starting osmo-stp 01:05:47.906006 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21939): Launched 01:05:48.209674 run osmo-stp_10.42.42.5(pid=21940): Launched 01:05:48.319420 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:05:48.850059 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21942): Launched 01:05:48.957301 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:05:49.222611 run patchelf(pid=21943): Launched 01:05:49.400086 run osmo-stp_10.42.42.5(pid=21940): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21940)] 01:05:49.529305 run osmo-stp_10.42.42.5(pid=21940): stdout: | (launched: 2022-12-14_01:05:48.059014) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:05:49.658891 run osmo-stp_10.42.42.5(pid=21940): stderr: | �[0;m�[38;5;43m20221214010548225 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214010548226 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214010548226 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214010548226 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214010548227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214010548227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214010548227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:05:49.783836 run osmo-stp_10.42.42.5(pid=21940): stdout: | (launched: 2022-12-14_01:05:48.059014) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:05:49.907663 run osmo-stp_10.42.42.5(pid=21940): stderr: | �[0;m�[38;5;43m20221214010548225 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214010548226 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214010548226 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214010548226 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214010548227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214010548227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214010548227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:05:50.051675 run patchelf(pid=21943): Terminating (SIGINT) 01:05:50.221520 run patchelf(pid=21943): Terminated: ok {rc=0} 01:05:50.252668 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21940): Process ended prematurely: osmo-stp_10.42.42.5(pid=21940) [trial-2397↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21940)] [trial-2397↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 01:05:50.261956 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:05:50.321355 run osmo-hlr_10.42.42.2(pid=21937): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21937)] 01:05:50.369764 run osmo-hlr_10.42.42.2(pid=21937): stdout: | (launched: 2022-12-14_01:05:46.968773) 01:05:50.418667 run osmo-hlr_10.42.42.2(pid=21937): stderr: | �[0;m�[1;31m20221214010547236 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214010547236 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214010547236 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214010547236 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214010547236 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214010547236 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214010547257 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214010547265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214010547266 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214010547266 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:05:50.460115 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21930): Terminating (SIGTERM) 01:05:50.499042 run iperf3-srv_10.42.42.10(pid=21931): Terminating (SIGTERM) 01:05:50.538106 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21932): Terminating (SIGTERM) 01:05:50.577238 run iperf3-srv_10.42.42.10(pid=21933): Terminating (SIGTERM) 01:05:50.616326 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21936): Terminating (SIGTERM) 01:05:50.655599 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21939): Terminating (SIGTERM) 01:05:50.694706 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21942): Terminating (SIGTERM) 01:05:50.703788 --- ParallelTerminationStrategy: PID 21930 died... 01:05:50.756414 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21930): Terminated: ok {rc=0} 01:05:50.766209 --- ParallelTerminationStrategy: PID 21931 died... 01:05:50.818360 run iperf3-srv_10.42.42.10(pid=21931): Terminated {rc=256} 01:05:50.827862 --- ParallelTerminationStrategy: PID 21932 died... 01:05:50.879839 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21932): Terminated: ok {rc=0} 01:05:50.889233 --- ParallelTerminationStrategy: PID 21933 died... 01:05:50.941164 run iperf3-srv_10.42.42.10(pid=21933): Terminated {rc=256} 01:05:50.950564 --- ParallelTerminationStrategy: PID 21936 died... 01:05:51.002685 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21936): Terminated: ok {rc=0} 01:05:51.011981 --- ParallelTerminationStrategy: PID 21939 died... 01:05:51.064737 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21939): Terminated: ok {rc=0} 01:05:51.074287 --- ParallelTerminationStrategy: PID 21942 died... 01:05:51.126370 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21942): Terminated: ok {rc=0} 01:05:51.212814 bus /gobi_0: Setting Powered False 01:05:52.314733 bus /gobi_0: Setting Powered False 01:05:53.418490 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21940): Process ended prematurely: osmo-stp_10.42.42.5(pid=21940) [trial-2397↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21940)]