Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21801): Process ended prematurely: osmo-stp_10.42.42.5(pid=21801) [trial-2397↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21801)]
Standard Output
---------------------------------------------- trial-2397 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 01:03:41.592167 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:41.603631 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:03:41.748514 tst cs_paging_gprs_active.py: using LAC 37465 01:03:41.876310 tst cs_paging_gprs_active.py: using RAC 235 01:03:42.003161 tst cs_paging_gprs_active.py: using CellId 37465 01:03:42.130931 tst cs_paging_gprs_active.py: using BVCI 37466 01:03:42.155681 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:42.166959 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:42.178122 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:42.189317 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:42.200993 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:42.212392 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:42.224404 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:42.236022 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:42.247932 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:03:42.364920 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:03:42.660816 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:03:42.796616 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:03:43.132591 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21791): Launched 01:03:43.413228 run iperf3-srv_10.42.42.10(pid=21792): Launched 01:03:43.612785 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:03:43.748349 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:03:44.084802 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21793): Launched 01:03:44.364708 run iperf3-srv_10.42.42.10(pid=21794): Launched 01:03:44.563587 tst cs_paging_gprs_active.py:38: start network... 01:03:44.699649 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:03:45.207881 run create_hlr_db(pid=21795): Launched 01:03:45.394980 bus /gobi_6: Setting Powered False 01:03:46.424560 run create_hlr_db(pid=21795): Terminated: ok {rc=0} 01:03:46.870447 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21797): Launched 01:03:47.250985 run osmo-hlr_10.42.42.2(pid=21798): Launched 01:03:47.370124 run osmo-stp_10.42.42.5: Starting osmo-stp 01:03:47.932932 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21800): Launched 01:03:48.255942 run osmo-stp_10.42.42.5(pid=21801): Launched 01:03:48.375237 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:03:48.938716 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21803): Launched 01:03:49.054697 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:03:49.337827 run patchelf(pid=21804): Launched 01:03:49.527390 run osmo-stp_10.42.42.5(pid=21801): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21801)] 01:03:49.667128 run osmo-stp_10.42.42.5(pid=21801): stdout: | (launched: 2022-12-14_01:03:48.097467) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:03:49.806675 run osmo-stp_10.42.42.5(pid=21801): stderr: | �[0;m�[38;5;43m20221214010348285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214010348285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214010348285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214010348286 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214010348286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214010348286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214010348286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:03:49.940724 run osmo-stp_10.42.42.5(pid=21801): stdout: | (launched: 2022-12-14_01:03:48.097467) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:03:50.074152 run osmo-stp_10.42.42.5(pid=21801): stderr: | �[0;m�[38;5;43m20221214010348285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214010348285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214010348285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214010348286 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214010348286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214010348286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214010348286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:03:50.229883 run patchelf(pid=21804): Terminating (SIGINT) 01:03:50.412256 run patchelf(pid=21804): Terminated: ok {rc=0} 01:03:50.445811 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21801): Process ended prematurely: osmo-stp_10.42.42.5(pid=21801) [trial-2397↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21801)] [trial-2397↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 01:03:50.455711 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 01:03:50.518552 run osmo-hlr_10.42.42.2(pid=21798): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21798)] 01:03:50.569598 run osmo-hlr_10.42.42.2(pid=21798): stdout: | (launched: 2022-12-14_01:03:47.027935) 01:03:50.621443 run osmo-hlr_10.42.42.2(pid=21798): stderr: | �[0;m�[1;31m20221214010347286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214010347286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214010347286 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214010347287 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214010347287 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214010347287 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214010347303 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214010347313 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214010347313 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214010347313 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:03:50.665742 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21791): Terminating (SIGTERM) 01:03:50.707322 run iperf3-srv_10.42.42.10(pid=21792): Terminating (SIGTERM) 01:03:50.748849 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21793): Terminating (SIGTERM) 01:03:50.790494 run iperf3-srv_10.42.42.10(pid=21794): Terminating (SIGTERM) 01:03:50.832189 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21797): Terminating (SIGTERM) 01:03:50.874224 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21800): Terminating (SIGTERM) 01:03:50.915910 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21803): Terminating (SIGTERM) 01:03:50.925564 --- ParallelTerminationStrategy: PID 21791 died... 01:03:50.981277 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21791): Terminated: ok {rc=0} 01:03:50.991204 --- ParallelTerminationStrategy: PID 21792 died... 01:03:51.046300 run iperf3-srv_10.42.42.10(pid=21792): Terminated {rc=256} 01:03:51.056162 --- ParallelTerminationStrategy: PID 21793 died... 01:03:51.111459 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21793): Terminated: ok {rc=0} 01:03:51.121397 --- ParallelTerminationStrategy: PID 21794 died... 01:03:51.176035 run iperf3-srv_10.42.42.10(pid=21794): Terminated {rc=256} 01:03:51.185933 --- ParallelTerminationStrategy: PID 21797 died... 01:03:51.241122 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21797): Terminated: ok {rc=0} 01:03:51.251075 --- ParallelTerminationStrategy: PID 21800 died... 01:03:51.306242 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21800): Terminated: ok {rc=0} 01:03:51.316159 --- ParallelTerminationStrategy: PID 21803 died... 01:03:51.371190 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21803): Terminated: ok {rc=0} 01:03:51.456700 bus /gobi_0: Setting Powered False 01:03:52.561518 bus /gobi_0: Setting Powered False 01:03:53.668288 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21801): Process ended prematurely: osmo-stp_10.42.42.5(pid=21801) [trial-2397↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21801)]