Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=24644): Process ended prematurely: osmo-stp_10.42.42.5(pid=24644) [trial-2397↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24644)]
Standard Output
---------------------------------------------- trial-2397 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 01:36:38.031910 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:38.042751 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 01:36:38.171419 tst cs_paging_gprs_active.py: using LAC 37640 01:36:38.289820 tst cs_paging_gprs_active.py: using RAC 155 01:36:38.411173 tst cs_paging_gprs_active.py: using CellId 37640 01:36:38.527075 tst cs_paging_gprs_active.py: using BVCI 37641 01:36:38.550001 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:38.560706 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:38.571696 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:38.582282 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:38.593333 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:38.603740 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:38.614424 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:38.625111 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:38.635770 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 01:36:38.756191 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 01:36:39.030962 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:36:39.156012 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:36:39.469265 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24634): Launched 01:36:39.729863 run iperf3-srv_10.42.42.10(pid=24635): Launched 01:36:39.912939 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:36:40.037728 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:36:40.351285 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24636): Launched 01:36:40.610841 run iperf3-srv_10.42.42.10(pid=24637): Launched 01:36:40.793254 tst cs_paging_gprs_active.py:38: start network... 01:36:40.917577 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:36:41.397769 run create_hlr_db(pid=24638): Launched 01:36:41.569580 bus /sierra_2: Setting Powered False 01:36:42.592219 run create_hlr_db(pid=24638): Terminated: ok {rc=0} 01:36:43.022513 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24640): Launched 01:36:43.345922 run osmo-hlr_10.42.42.2(pid=24641): Launched 01:36:43.466700 run osmo-stp_10.42.42.5: Starting osmo-stp 01:36:44.028310 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24643): Launched 01:36:44.352541 run osmo-stp_10.42.42.5(pid=24644): Launched 01:36:44.469460 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:36:45.037800 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24646): Launched 01:36:45.152797 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:36:45.435607 run patchelf(pid=24647): Launched 01:36:45.625064 run osmo-stp_10.42.42.5(pid=24644): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24644)] 01:36:45.763512 run osmo-stp_10.42.42.5(pid=24644): stdout: | (launched: 2022-12-14_01:36:44.192450) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:36:45.910324 run osmo-stp_10.42.42.5(pid=24644): stderr: | �[0;m�[38;5;43m20221214013644383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214013644383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214013644383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214013644383 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214013644384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214013644384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214013644384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:36:46.063340 run osmo-stp_10.42.42.5(pid=24644): stdout: | (launched: 2022-12-14_01:36:44.192450) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:36:46.244534 run osmo-stp_10.42.42.5(pid=24644): stderr: | �[0;m�[38;5;43m20221214013644383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214013644383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214013644383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214013644383 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214013644384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214013644384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214013644384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:36:46.431887 run patchelf(pid=24647): Terminating (SIGINT) 01:36:46.629168 run patchelf(pid=24647): Terminated: ok {rc=0} 01:36:46.662012 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24644): Process ended prematurely: osmo-stp_10.42.42.5(pid=24644) [trial-2397↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24644)] [trial-2397↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 01:36:46.673542 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 01:36:46.735844 run osmo-hlr_10.42.42.2(pid=24641): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24641)] 01:36:46.786808 run osmo-hlr_10.42.42.2(pid=24641): stdout: | (launched: 2022-12-14_01:36:43.186377) 01:36:46.852229 run osmo-hlr_10.42.42.2(pid=24641): stderr: | �[0;m�[1;31m20221214013643382 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214013643382 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214013643382 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214013643382 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214013643382 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214013643382 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214013643401 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214013643411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214013643411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214013643411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:36:46.910336 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24634): Terminating (SIGTERM) 01:36:46.965821 run iperf3-srv_10.42.42.10(pid=24635): Terminating (SIGTERM) 01:36:47.010514 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24636): Terminating (SIGTERM) 01:36:47.051351 run iperf3-srv_10.42.42.10(pid=24637): Terminating (SIGTERM) 01:36:47.092330 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24640): Terminating (SIGTERM) 01:36:47.134687 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24643): Terminating (SIGTERM) 01:36:47.177504 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24646): Terminating (SIGTERM) 01:36:47.187524 --- ParallelTerminationStrategy: PID 24634 died... 01:36:47.243538 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24634): Terminated: ok {rc=0} 01:36:47.253562 --- ParallelTerminationStrategy: PID 24635 died... 01:36:47.308480 run iperf3-srv_10.42.42.10(pid=24635): Terminated {rc=256} 01:36:47.319463 --- ParallelTerminationStrategy: PID 24636 died... 01:36:47.372226 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24636): Terminated: ok {rc=0} 01:36:47.381952 --- ParallelTerminationStrategy: PID 24637 died... 01:36:47.434254 run iperf3-srv_10.42.42.10(pid=24637): Terminated {rc=256} 01:36:47.443897 --- ParallelTerminationStrategy: PID 24640 died... 01:36:47.496999 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24640): Terminated: ok {rc=0} 01:36:47.506850 --- ParallelTerminationStrategy: PID 24643 died... 01:36:47.559613 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24643): Terminated: ok {rc=0} 01:36:47.569373 --- ParallelTerminationStrategy: PID 24646 died... 01:36:47.621851 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24646): Terminated: ok {rc=0} 01:36:47.708400 bus /gobi_0: Setting Powered False 01:36:48.810205 bus /gobi_0: Setting Powered False 01:36:49.920271 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24644): Process ended prematurely: osmo-stp_10.42.42.5(pid=24644) [trial-2397↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24644)]