Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=5277): Process ended prematurely: osmo-stp_10.42.42.5(pid=5277) [trial-2399↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5277)]
Standard Output
---------------------------------------------- trial-2399 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 03:51:36.820235 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:36.830932 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 03:51:36.971250 tst cs_paging_gprs_active.py: using LAC 38351 03:51:37.090058 tst cs_paging_gprs_active.py: using RAC 101 03:51:37.207261 tst cs_paging_gprs_active.py: using CellId 38351 03:51:37.326019 tst cs_paging_gprs_active.py: using BVCI 38352 03:51:37.348762 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:37.359444 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:37.369979 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:37.380378 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:37.390885 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:37.401719 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:37.412642 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:37.423451 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:51:37.434060 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:51:37.553547 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:51:37.828837 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:51:37.952609 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:51:38.263601 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5267): Launched 03:51:38.520831 run iperf3-srv_10.42.42.10(pid=5268): Launched 03:51:38.701877 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:51:38.825309 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:51:39.134804 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5269): Launched 03:51:39.391861 run iperf3-srv_10.42.42.10(pid=5270): Launched 03:51:39.573420 tst cs_paging_gprs_active.py:38: start network... 03:51:39.697476 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:51:40.178281 run create_hlr_db(pid=5271): Launched 03:51:40.349071 bus /gobi_6: Setting Powered False 03:51:41.371027 run create_hlr_db(pid=5271): Terminated: ok {rc=0} 03:51:41.797199 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5273): Launched 03:51:42.118848 run osmo-hlr_10.42.42.2(pid=5274): Launched 03:51:42.237074 run osmo-stp_10.42.42.5: Starting osmo-stp 03:51:42.795479 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5276): Launched 03:51:43.116577 run osmo-stp_10.42.42.5(pid=5277): Launched 03:51:43.237667 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:51:43.798680 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5279): Launched 03:51:43.913396 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:51:44.194251 run patchelf(pid=5280): Launched 03:51:44.382446 run osmo-stp_10.42.42.5(pid=5277): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5277)] 03:51:44.519894 run osmo-stp_10.42.42.5(pid=5277): stdout: | (launched: 2022-12-14_03:51:42.958765) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:51:44.658633 run osmo-stp_10.42.42.5(pid=5277): stderr: | �[0;m�[38;5;43m20221214035143151 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214035143151 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214035143152 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214035143152 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214035143153 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214035143153 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214035143153 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:51:44.791844 run osmo-stp_10.42.42.5(pid=5277): stdout: | (launched: 2022-12-14_03:51:42.958765) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:51:44.924259 run osmo-stp_10.42.42.5(pid=5277): stderr: | �[0;m�[38;5;43m20221214035143151 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214035143151 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214035143152 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214035143152 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214035143153 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214035143153 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214035143153 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:51:45.077642 run patchelf(pid=5280): Terminating (SIGINT) 03:51:45.257155 run patchelf(pid=5280): Terminated: ok {rc=0} 03:51:45.290231 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5277): Process ended prematurely: osmo-stp_10.42.42.5(pid=5277) [trial-2399↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5277)] [trial-2399↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 03:51:45.300086 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 03:51:45.363149 run osmo-hlr_10.42.42.2(pid=5274): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5274)] 03:51:45.414472 run osmo-hlr_10.42.42.2(pid=5274): stdout: | (launched: 2022-12-14_03:51:41.960625) 03:51:45.466427 run osmo-hlr_10.42.42.2(pid=5274): stderr: | �[0;m�[1;31m20221214035142155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214035142155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214035142155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214035142155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214035142155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214035142155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214035142168 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214035142176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214035142177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214035142177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:51:45.510745 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5267): Terminating (SIGTERM) 03:51:45.552416 run iperf3-srv_10.42.42.10(pid=5268): Terminating (SIGTERM) 03:51:45.595141 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5269): Terminating (SIGTERM) 03:51:45.637252 run iperf3-srv_10.42.42.10(pid=5270): Terminating (SIGTERM) 03:51:45.679699 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5273): Terminating (SIGTERM) 03:51:45.721839 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5276): Terminating (SIGTERM) 03:51:45.764103 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5279): Terminating (SIGTERM) 03:51:45.773835 --- ParallelTerminationStrategy: PID 5267 died... 03:51:45.830396 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5267): Terminated: ok {rc=0} 03:51:45.841763 --- ParallelTerminationStrategy: PID 5268 died... 03:51:45.919299 run iperf3-srv_10.42.42.10(pid=5268): Terminated {rc=256} 03:51:45.930738 --- ParallelTerminationStrategy: PID 5269 died... 03:51:45.988157 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5269): Terminated: ok {rc=0} 03:51:45.998896 --- ParallelTerminationStrategy: PID 5270 died... 03:51:46.056724 run iperf3-srv_10.42.42.10(pid=5270): Terminated {rc=256} 03:51:46.073489 --- ParallelTerminationStrategy: PID 5273 died... 03:51:46.130560 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5273): Terminated: ok {rc=0} 03:51:46.141387 --- ParallelTerminationStrategy: PID 5276 died... 03:51:46.200302 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5276): Terminated: ok {rc=0} 03:51:46.211224 --- ParallelTerminationStrategy: PID 5279 died... 03:51:46.269901 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5279): Terminated: ok {rc=0} 03:51:46.362002 bus /gobi_0: Setting Powered False 03:51:47.468480 bus /gobi_0: Setting Powered False 03:51:48.577503 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5277): Process ended prematurely: osmo-stp_10.42.42.5(pid=5277) [trial-2399↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5277)]