Failed
gprs:trx-lms+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=8484): Process ended prematurely: osmo-stp_10.42.42.5(pid=8484) [trial-2399↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8484)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-lms+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 04:26:07.120345 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:07.132603 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 04:26:07.301476 tst ping_idle_ping.py: using LAC 38534 04:26:07.428789 tst ping_idle_ping.py: using RAC 29 04:26:07.558214 tst ping_idle_ping.py: using CellId 38534 04:26:07.684530 tst ping_idle_ping.py: using BVCI 38535 04:26:07.709106 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:07.720408 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:07.731686 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:07.743001 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:07.754865 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:07.766813 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:07.779070 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:26:07.791354 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 04:26:08.067887 tst ping_idle_ping.py:24: start network... 04:26:08.191357 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:26:08.676298 run create_hlr_db(pid=8478): Launched 04:26:08.848203 bus /gobi_6: Setting Powered False 04:26:09.870791 run create_hlr_db(pid=8478): Terminated: ok {rc=0} 04:26:10.298543 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8480): Launched 04:26:10.619514 run osmo-hlr_10.42.42.2(pid=8481): Launched 04:26:10.740829 run osmo-stp_10.42.42.5: Starting osmo-stp 04:26:11.295300 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8483): Launched 04:26:11.616559 run osmo-stp_10.42.42.5(pid=8484): Launched 04:26:11.735383 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:26:12.296076 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8486): Launched 04:26:12.410421 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:26:12.692227 run patchelf(pid=8487): Launched 04:26:12.880118 run osmo-stp_10.42.42.5(pid=8484): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8484)] 04:26:13.017865 run osmo-stp_10.42.42.5(pid=8484): stdout: | (launched: 2022-12-14_04:26:11.456543) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:26:13.155843 run osmo-stp_10.42.42.5(pid=8484): stderr: | �[0;m�[38;5;43m20221214042611651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214042611651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214042611652 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214042611652 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214042611652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214042611653 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214042611653 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:26:13.288886 run osmo-stp_10.42.42.5(pid=8484): stdout: | (launched: 2022-12-14_04:26:11.456543) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:26:13.420838 run osmo-stp_10.42.42.5(pid=8484): stderr: | �[0;m�[38;5;43m20221214042611651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214042611651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214042611652 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214042611652 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214042611652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214042611653 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214042611653 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:26:13.573762 run patchelf(pid=8487): Terminating (SIGINT) 04:26:13.753369 run patchelf(pid=8487): Terminated: ok {rc=0} 04:26:13.785886 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=8484): Process ended prematurely: osmo-stp_10.42.42.5(pid=8484) [trial-2399↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8484)] [trial-2399↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 04:26:13.795288 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 04:26:13.859190 run osmo-hlr_10.42.42.2(pid=8481): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8481)] 04:26:13.911175 run osmo-hlr_10.42.42.2(pid=8481): stdout: | (launched: 2022-12-14_04:26:10.460530) 04:26:13.963905 run osmo-hlr_10.42.42.2(pid=8481): stderr: | �[0;m�[1;31m20221214042610658 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214042610658 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214042610658 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214042610658 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214042610658 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214042610658 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214042610670 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-lms+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214042610678 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214042610678 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214042610679 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:26:14.008873 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8480): Terminating (SIGTERM) 04:26:14.051250 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8483): Terminating (SIGTERM) 04:26:14.093625 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8486): Terminating (SIGTERM) 04:26:14.103403 --- ParallelTerminationStrategy: PID 8480 died... 04:26:14.160310 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8480): Terminated: ok {rc=0} 04:26:14.170515 --- ParallelTerminationStrategy: PID 8483 died... 04:26:14.227364 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8483): Terminated: ok {rc=0} 04:26:14.237608 --- ParallelTerminationStrategy: PID 8486 died... 04:26:14.294583 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8486): Terminated: ok {rc=0} 04:26:14.382996 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8484): Process ended prematurely: osmo-stp_10.42.42.5(pid=8484) [trial-2399↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8484)]