Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=7036): Process ended prematurely: osmo-stp_10.42.42.5(pid=7036) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7036)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 04:09:09.844368 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:09.857517 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 04:09:10.023516 tst cs_paging_gprs_active.py: using LAC 38444 04:09:10.142582 tst cs_paging_gprs_active.py: using RAC 194 04:09:10.262608 tst cs_paging_gprs_active.py: using CellId 38444 04:09:10.382468 tst cs_paging_gprs_active.py: using BVCI 38445 04:09:10.406813 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:10.418839 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:10.430767 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:10.442546 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:10.456241 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:10.468448 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:10.480789 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:10.493028 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:09:10.505609 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:09:10.628650 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:09:10.917017 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:09:11.045757 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:09:11.382105 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7026): Launched 04:09:11.669136 run iperf3-srv_10.42.42.10(pid=7027): Launched 04:09:11.861630 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:09:11.991854 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:09:12.331974 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7028): Launched 04:09:12.618246 run iperf3-srv_10.42.42.10(pid=7029): Launched 04:09:12.812426 tst cs_paging_gprs_active.py:38: start network... 04:09:12.942015 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:09:13.478875 run create_hlr_db(pid=7030): Launched 04:09:13.658924 bus /gobi_6: Setting Powered False 04:09:14.683136 run create_hlr_db(pid=7030): Terminated: ok {rc=0} 04:09:15.112402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7032): Launched 04:09:15.522914 run osmo-hlr_10.42.42.2(pid=7033): Launched 04:09:15.707675 run osmo-stp_10.42.42.5: Starting osmo-stp 04:09:16.430871 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7035): Launched 04:09:16.857401 run osmo-stp_10.42.42.5(pid=7036): Launched 04:09:17.071465 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:09:17.807677 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7038): Launched 04:09:17.925847 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:09:18.318154 run patchelf(pid=7039): Launched 04:09:18.550118 run osmo-stp_10.42.42.5(pid=7036): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7036)] 04:09:18.692192 run osmo-stp_10.42.42.5(pid=7036): stdout: | (launched: 2022-12-14_04:09:16.630262) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:09:18.834449 run osmo-stp_10.42.42.5(pid=7036): stderr: | �[0;m�[38;5;43m20221214040916990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214040916990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214040916990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214040916991 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214040916991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214040916991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214040916991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:09:18.971327 run osmo-stp_10.42.42.5(pid=7036): stdout: | (launched: 2022-12-14_04:09:16.630262) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:09:19.108526 run osmo-stp_10.42.42.5(pid=7036): stderr: | �[0;m�[38;5;43m20221214040916990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214040916990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214040916990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214040916991 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214040916991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214040916991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214040916991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:09:19.267152 run patchelf(pid=7039): Terminating (SIGINT) 04:09:19.453566 run patchelf(pid=7039): Terminated: ok {rc=0} 04:09:19.487913 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7036): Process ended prematurely: osmo-stp_10.42.42.5(pid=7036) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7036)] [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 04:09:19.498246 tst cs_paging_gprs_active.py:38: Test FAILED (9.7 sec) 04:09:19.566176 run osmo-hlr_10.42.42.2(pid=7033): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7033)] 04:09:19.620850 run osmo-hlr_10.42.42.2(pid=7033): stdout: | (launched: 2022-12-14_04:09:15.271186) 04:09:19.677127 run osmo-hlr_10.42.42.2(pid=7033): stderr: | �[0;m�[1;31m20221214040915606 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214040915606 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214040915606 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214040915606 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214040915607 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214040915607 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214040915658 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214040915672 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214040915672 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214040915672 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:09:19.725095 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7026): Terminating (SIGTERM) 04:09:19.770321 run iperf3-srv_10.42.42.10(pid=7027): Terminating (SIGTERM) 04:09:19.815669 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7028): Terminating (SIGTERM) 04:09:19.862867 run iperf3-srv_10.42.42.10(pid=7029): Terminating (SIGTERM) 04:09:19.910255 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7032): Terminating (SIGTERM) 04:09:19.957661 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7035): Terminating (SIGTERM) 04:09:20.005392 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7038): Terminating (SIGTERM) 04:09:20.016537 --- ParallelTerminationStrategy: PID 7026 died... 04:09:20.078623 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7026): Terminated: ok {rc=0} 04:09:20.090777 --- ParallelTerminationStrategy: PID 7027 died... 04:09:20.150116 run iperf3-srv_10.42.42.10(pid=7027): Terminated {rc=256} 04:09:20.161917 --- ParallelTerminationStrategy: PID 7028 died... 04:09:20.221184 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7028): Terminated: ok {rc=0} 04:09:20.232814 --- ParallelTerminationStrategy: PID 7029 died... 04:09:20.291827 run iperf3-srv_10.42.42.10(pid=7029): Terminated {rc=256} 04:09:20.303520 --- ParallelTerminationStrategy: PID 7032 died... 04:09:20.362548 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7032): Terminated: ok {rc=0} 04:09:20.374678 --- ParallelTerminationStrategy: PID 7035 died... 04:09:20.434087 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7035): Terminated: ok {rc=0} 04:09:20.446279 --- ParallelTerminationStrategy: PID 7038 died... 04:09:20.505215 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7038): Terminated: ok {rc=0} 04:09:20.596481 bus /gobi_0: Setting Powered False 04:09:21.709748 bus /gobi_0: Setting Powered False 04:09:22.827934 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7036): Process ended prematurely: osmo-stp_10.42.42.5(pid=7036) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7036)]