Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=7681): Process ended prematurely: osmo-stp_10.42.42.5(pid=7681) [trial-2399↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7681)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 04:18:22.299567 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:18:22.311331 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 04:18:22.458115 tst cs_paging_gprs_active.py: using LAC 38493 04:18:22.578090 tst cs_paging_gprs_active.py: using RAC 243 04:18:22.703179 tst cs_paging_gprs_active.py: using CellId 38493 04:18:22.827633 tst cs_paging_gprs_active.py: using BVCI 38494 04:18:22.852362 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:18:22.864054 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:18:22.875743 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:18:22.887307 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:18:22.899069 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:18:22.910816 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:18:22.922736 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:18:22.934547 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:18:22.946589 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:18:23.063637 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:18:23.346002 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:18:23.470999 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:18:23.783250 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7671): Launched 04:18:24.042160 run iperf3-srv_10.42.42.10(pid=7672): Launched 04:18:24.224492 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:18:24.348807 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:18:24.660455 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7673): Launched 04:18:24.921826 run iperf3-srv_10.42.42.10(pid=7674): Launched 04:18:25.104237 tst cs_paging_gprs_active.py:38: start network... 04:18:25.228487 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:18:25.717463 run create_hlr_db(pid=7675): Launched 04:18:25.890375 bus /gobi_6: Setting Powered False 04:18:26.913369 run create_hlr_db(pid=7675): Terminated: ok {rc=0} 04:18:27.343043 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7677): Launched 04:18:27.668237 run osmo-hlr_10.42.42.2(pid=7678): Launched 04:18:27.787885 run osmo-stp_10.42.42.5: Starting osmo-stp 04:18:28.349157 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7680): Launched 04:18:28.672132 run osmo-stp_10.42.42.5(pid=7681): Launched 04:18:28.789163 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:18:29.351321 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7683): Launched 04:18:29.466458 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:18:29.747540 run patchelf(pid=7684): Launched 04:18:29.935781 run osmo-stp_10.42.42.5(pid=7681): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7681)] 04:18:30.073615 run osmo-stp_10.42.42.5(pid=7681): stdout: | (launched: 2022-12-14_04:18:28.512865) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:18:30.211542 run osmo-stp_10.42.42.5(pid=7681): stderr: | �[0;m�[38;5;43m20221214041828704 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214041828704 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214041828705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214041828707 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214041828707 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214041828707 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214041828707 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:18:30.345311 run osmo-stp_10.42.42.5(pid=7681): stdout: | (launched: 2022-12-14_04:18:28.512865) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:18:30.477912 run osmo-stp_10.42.42.5(pid=7681): stderr: | �[0;m�[38;5;43m20221214041828704 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214041828704 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214041828705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214041828707 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214041828707 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214041828707 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214041828707 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:18:30.631346 run patchelf(pid=7684): Terminating (SIGINT) 04:18:30.811629 run patchelf(pid=7684): Terminated: ok {rc=0} 04:18:30.846273 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7681): Process ended prematurely: osmo-stp_10.42.42.5(pid=7681) [trial-2399↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7681)] [trial-2399↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 04:18:30.867068 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 04:18:30.942299 run osmo-hlr_10.42.42.2(pid=7678): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7678)] 04:18:30.993634 run osmo-hlr_10.42.42.2(pid=7678): stdout: | (launched: 2022-12-14_04:18:27.507858) 04:18:31.045927 run osmo-hlr_10.42.42.2(pid=7678): stderr: | �[0;m�[1;31m20221214041827705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214041827706 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214041827706 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214041827706 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214041827706 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214041827706 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214041827718 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214041827726 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214041827727 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214041827727 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:18:31.089922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7671): Terminating (SIGTERM) 04:18:31.134013 run iperf3-srv_10.42.42.10(pid=7672): Terminating (SIGTERM) 04:18:31.174984 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7673): Terminating (SIGTERM) 04:18:31.217711 run iperf3-srv_10.42.42.10(pid=7674): Terminating (SIGTERM) 04:18:31.258865 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7677): Terminating (SIGTERM) 04:18:31.301041 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7680): Terminating (SIGTERM) 04:18:31.346864 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7683): Terminating (SIGTERM) 04:18:31.356819 --- ParallelTerminationStrategy: PID 7671 died... 04:18:31.413436 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7671): Terminated: ok {rc=0} 04:18:31.423501 --- ParallelTerminationStrategy: PID 7672 died... 04:18:31.477762 run iperf3-srv_10.42.42.10(pid=7672): Terminated {rc=256} 04:18:31.488095 --- ParallelTerminationStrategy: PID 7673 died... 04:18:31.544521 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7673): Terminated: ok {rc=0} 04:18:31.554956 --- ParallelTerminationStrategy: PID 7674 died... 04:18:31.610522 run iperf3-srv_10.42.42.10(pid=7674): Terminated {rc=256} 04:18:31.620469 --- ParallelTerminationStrategy: PID 7677 died... 04:18:31.675160 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7677): Terminated: ok {rc=0} 04:18:31.685191 --- ParallelTerminationStrategy: PID 7680 died... 04:18:31.741633 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7680): Terminated: ok {rc=0} 04:18:31.751738 --- ParallelTerminationStrategy: PID 7683 died... 04:18:31.806526 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7683): Terminated: ok {rc=0} 04:18:31.902933 bus /gobi_0: Setting Powered False 04:18:33.009168 bus /gobi_0: Setting Powered False 04:18:34.120378 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7681): Process ended prematurely: osmo-stp_10.42.42.5(pid=7681) [trial-2399↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7681)]