Failed
dynts:oc2g+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_oc2g+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13993): Process ended prematurely: osmo-stp_10.42.42.5(pid=13993) [trial-2400↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13993)]
Standard Output
---------------------------------------------- trial-2400 dynts:oc2g+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 05:46:36.299406 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:46:36.310749 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 05:46:36.459410 tst switch_tch_pdch.py: using LAC 38818 05:46:36.585125 tst switch_tch_pdch.py: using RAC 58 05:46:36.710628 tst switch_tch_pdch.py: using CellId 38818 05:46:36.831598 tst switch_tch_pdch.py: using BVCI 38819 05:46:36.854633 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:46:36.865637 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:46:36.876343 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:46:36.887089 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:46:36.898391 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:46:36.909492 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:46:36.920568 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:46:36.931611 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 05:46:37.051026 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 05:46:37.328054 tst switch_tch_pdch.py:51: start network... 05:46:37.454188 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:46:37.902157 run create_hlr_db(pid=13987): Launched 05:46:38.024451 bus /gobi_6: Setting Powered False 05:46:39.097018 run create_hlr_db(pid=13987): Terminated: ok {rc=0} 05:46:39.471633 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13989): Launched 05:46:39.772249 run osmo-hlr_10.42.42.2(pid=13990): Launched 05:46:39.889064 run osmo-stp_10.42.42.5: Starting osmo-stp 05:46:40.388898 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13992): Launched 05:46:40.689783 run osmo-stp_10.42.42.5(pid=13993): Launched 05:46:40.800221 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:46:41.299082 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13995): Launched 05:46:41.406234 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:46:41.669298 run patchelf(pid=13996): Launched 05:46:41.844264 run osmo-stp_10.42.42.5(pid=13993): ERR: Terminated: ERROR {rc=1} [trial-2400↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13993)] 05:46:41.972501 run osmo-stp_10.42.42.5(pid=13993): stdout: | (launched: 2022-12-14_05:46:40.540904) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:46:42.101187 run osmo-stp_10.42.42.5(pid=13993): stderr: | �[0;m�[38;5;43m20221214054640709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214054640709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214054640709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214054640710 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214054640710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214054640710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214054640710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:46:42.225132 run osmo-stp_10.42.42.5(pid=13993): stdout: | (launched: 2022-12-14_05:46:40.540904) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:46:42.348329 run osmo-stp_10.42.42.5(pid=13993): stderr: | �[0;m�[38;5;43m20221214054640709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214054640709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214054640709 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214054640710 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214054640710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214054640710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214054640710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:46:42.490885 run patchelf(pid=13996): Terminating (SIGINT) 05:46:42.658566 run patchelf(pid=13996): Terminated: ok {rc=0} 05:46:42.689152 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=13993): Process ended prematurely: osmo-stp_10.42.42.5(pid=13993) [trial-2400↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13993)] [trial-2400↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 05:46:42.697760 tst switch_tch_pdch.py:54: Test FAILED (6.4 sec) 05:46:42.757272 run osmo-hlr_10.42.42.2(pid=13990): ERR: Terminated: ERROR {rc=237} [trial-2400↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13990)] 05:46:42.806313 run osmo-hlr_10.42.42.2(pid=13990): stdout: | (launched: 2022-12-14_05:46:39.623687) 05:46:42.855334 run osmo-hlr_10.42.42.2(pid=13990): stderr: | �[0;m�[1;31m20221214054639796 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214054639796 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214054639796 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214054639796 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214054639796 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214054639796 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214054639808 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/dynts:oc2g+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214054639817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214054639817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214054639817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:46:42.897417 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13989): Terminating (SIGTERM) 05:46:42.937385 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13992): Terminating (SIGTERM) 05:46:42.976674 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13995): Terminating (SIGTERM) 05:46:42.985736 --- ParallelTerminationStrategy: PID 13989 died... 05:46:43.038795 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13989): Terminated: ok {rc=0} 05:46:43.048242 --- ParallelTerminationStrategy: PID 13992 died... 05:46:43.101041 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13992): Terminated: ok {rc=0} 05:46:43.110472 --- ParallelTerminationStrategy: PID 13995 died... 05:46:43.163471 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13995): Terminated: ok {rc=0} 05:46:43.250842 bus /gobi_0: Setting Powered False 05:46:44.351921 bus /gobi_0: Setting Powered False 05:46:45.457745 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13993): Process ended prematurely: osmo-stp_10.42.42.5(pid=13993) [trial-2400↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13993)]