Failed
dynts:trx-b200+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-b200+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=14931): Process ended prematurely: osmo-stp_10.42.42.5(pid=14931) [trial-2400↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14931)]
Standard Output
---------------------------------------------- trial-2400 dynts:trx-b200+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 05:56:18.854494 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:56:18.865442 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 05:56:19.025753 tst switch_tch_pdch.py: using LAC 38869 05:56:19.150758 tst switch_tch_pdch.py: using RAC 109 05:56:19.269744 tst switch_tch_pdch.py: using CellId 38869 05:56:19.389953 tst switch_tch_pdch.py: using BVCI 38870 05:56:19.413729 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:56:19.424611 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:56:19.435381 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:56:19.446147 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:56:19.457575 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:56:19.468652 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:56:19.479793 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 05:56:19.490866 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 05:56:19.611017 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 05:56:19.907551 tst switch_tch_pdch.py:51: start network... 05:56:20.045515 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:56:20.541893 run create_hlr_db(pid=14925): Launched 05:56:20.676263 bus /gobi_6: Setting Powered False 05:56:21.754612 run create_hlr_db(pid=14925): Terminated: ok {rc=0} 05:56:22.142700 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14927): Launched 05:56:22.451911 run osmo-hlr_10.42.42.2(pid=14928): Launched 05:56:22.572400 run osmo-stp_10.42.42.5: Starting osmo-stp 05:56:23.089477 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14930): Launched 05:56:23.400877 run osmo-stp_10.42.42.5(pid=14931): Launched 05:56:23.513739 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:56:24.026792 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14933): Launched 05:56:24.137094 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:56:24.406616 run patchelf(pid=14934): Launched 05:56:24.587817 run osmo-stp_10.42.42.5(pid=14931): ERR: Terminated: ERROR {rc=1} [trial-2400↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14931)] 05:56:24.720081 run osmo-stp_10.42.42.5(pid=14931): stdout: | (launched: 2022-12-14_05:56:23.246020) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:56:24.852786 run osmo-stp_10.42.42.5(pid=14931): stderr: | �[0;m�[38;5;43m20221214055623420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214055623420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214055623420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214055623421 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214055623421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214055623421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214055623421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:56:24.980264 run osmo-stp_10.42.42.5(pid=14931): stdout: | (launched: 2022-12-14_05:56:23.246020) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:56:25.106879 run osmo-stp_10.42.42.5(pid=14931): stderr: | �[0;m�[38;5;43m20221214055623420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214055623420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214055623420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214055623421 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214055623421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214055623421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214055623421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:56:25.254282 run patchelf(pid=14934): Terminating (SIGINT) 05:56:25.428237 run patchelf(pid=14934): Terminated: ok {rc=0} 05:56:25.459843 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=14931): Process ended prematurely: osmo-stp_10.42.42.5(pid=14931) [trial-2400↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14931)] [trial-2400↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 05:56:25.468689 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 05:56:25.529463 run osmo-hlr_10.42.42.2(pid=14928): ERR: Terminated: ERROR {rc=237} [trial-2400↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14928)] 05:56:25.579156 run osmo-hlr_10.42.42.2(pid=14928): stdout: | (launched: 2022-12-14_05:56:22.299675) 05:56:25.629621 run osmo-hlr_10.42.42.2(pid=14928): stderr: | �[0;m�[1;31m20221214055622478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214055622478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214055622478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214055622478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214055622478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214055622478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214055622490 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/dynts:trx-b200+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214055622499 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214055622499 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214055622499 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:56:25.672420 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14927): Terminating (SIGTERM) 05:56:25.712531 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14930): Terminating (SIGTERM) 05:56:25.752642 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14933): Terminating (SIGTERM) 05:56:25.761586 --- ParallelTerminationStrategy: PID 14927 died... 05:56:25.815521 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14927): Terminated: ok {rc=0} 05:56:25.825224 --- ParallelTerminationStrategy: PID 14930 died... 05:56:25.878926 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14930): Terminated: ok {rc=0} 05:56:25.888433 --- ParallelTerminationStrategy: PID 14933 died... 05:56:25.941959 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14933): Terminated: ok {rc=0} 05:56:26.029942 bus /gobi_0: Setting Powered False 05:56:27.133707 bus /gobi_0: Setting Powered False 05:56:28.245482 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14931): Process ended prematurely: osmo-stp_10.42.42.5(pid=14931) [trial-2400↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14931)]