Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=18056): Process ended prematurely: osmo-stp_10.42.42.5(pid=18056) [trial-2400↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18056)]
Standard Output
---------------------------------------------- trial-2400 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 06:32:45.659511 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 06:32:45.670237 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 06:32:45.805664 tst cs_paging_gprs_active.py: using LAC 39061 06:32:45.947400 tst cs_paging_gprs_active.py: using RAC 46 06:32:46.086739 tst cs_paging_gprs_active.py: using CellId 39061 06:32:46.214315 tst cs_paging_gprs_active.py: using BVCI 39062 06:32:46.239676 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 06:32:46.251661 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 06:32:46.263364 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 06:32:46.275056 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 06:32:46.288179 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 06:32:46.301099 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 06:32:46.314154 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 06:32:46.326606 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 06:32:46.339419 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 06:32:46.465202 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 06:32:46.828558 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:32:46.973868 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:32:47.337683 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18046): Launched 06:32:47.608470 run iperf3-srv_10.42.42.10(pid=18047): Launched 06:32:47.801379 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:32:47.932295 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:32:48.258265 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18048): Launched 06:32:48.528226 run iperf3-srv_10.42.42.10(pid=18049): Launched 06:32:48.720615 tst cs_paging_gprs_active.py:38: start network... 06:32:48.851791 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:32:49.344566 run create_hlr_db(pid=18050): Launched 06:32:49.524941 bus /sierra_2: Setting Powered False 06:32:50.545357 run create_hlr_db(pid=18050): Terminated: ok {rc=0} 06:32:50.989510 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18052): Launched 06:32:51.323368 run osmo-hlr_10.42.42.2(pid=18053): Launched 06:32:51.449608 run osmo-stp_10.42.42.5: Starting osmo-stp 06:32:52.031377 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18055): Launched 06:32:52.366469 run osmo-stp_10.42.42.5(pid=18056): Launched 06:32:52.486816 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:32:53.069605 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18058): Launched 06:32:53.189255 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:32:53.480166 run patchelf(pid=18059): Launched 06:32:53.675314 run osmo-stp_10.42.42.5(pid=18056): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18056)] 06:32:53.818199 run osmo-stp_10.42.42.5(pid=18056): stdout: | (launched: 2022-12-14_06:32:52.201778) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:32:53.960878 run osmo-stp_10.42.42.5(pid=18056): stderr: | �[0;m�[38;5;43m20221214063252396 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214063252396 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214063252396 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214063252397 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214063252397 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214063252397 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214063252397 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:32:54.098640 run osmo-stp_10.42.42.5(pid=18056): stdout: | (launched: 2022-12-14_06:32:52.201778) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:32:54.234891 run osmo-stp_10.42.42.5(pid=18056): stderr: | �[0;m�[38;5;43m20221214063252396 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214063252396 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214063252396 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214063252397 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214063252397 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214063252397 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214063252397 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:32:54.394255 run patchelf(pid=18059): Terminating (SIGINT) 06:32:54.581052 run patchelf(pid=18059): Terminated: ok {rc=0} 06:32:54.615187 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18056): Process ended prematurely: osmo-stp_10.42.42.5(pid=18056) [trial-2400↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18056)] [trial-2400↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 06:32:54.625315 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 06:32:54.687959 run osmo-hlr_10.42.42.2(pid=18053): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18053)] 06:32:54.739415 run osmo-hlr_10.42.42.2(pid=18053): stdout: | (launched: 2022-12-14_06:32:51.160094) 06:32:54.791759 run osmo-hlr_10.42.42.2(pid=18053): stderr: | �[0;m�[1;31m20221214063251360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214063251360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214063251360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214063251360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214063251360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214063251360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214063251377 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214063251385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214063251385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214063251386 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:32:54.836235 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18046): Terminating (SIGTERM) 06:32:54.878419 run iperf3-srv_10.42.42.10(pid=18047): Terminating (SIGTERM) 06:32:54.920486 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18048): Terminating (SIGTERM) 06:32:54.962588 run iperf3-srv_10.42.42.10(pid=18049): Terminating (SIGTERM) 06:32:55.004448 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18052): Terminating (SIGTERM) 06:32:55.046081 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18055): Terminating (SIGTERM) 06:32:55.088154 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18058): Terminating (SIGTERM) 06:32:55.097923 --- ParallelTerminationStrategy: PID 18046 died... 06:32:55.153865 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18046): Terminated: ok {rc=0} 06:32:55.164332 --- ParallelTerminationStrategy: PID 18047 died... 06:32:55.219863 run iperf3-srv_10.42.42.10(pid=18047): Terminated {rc=256} 06:32:55.229929 --- ParallelTerminationStrategy: PID 18048 died... 06:32:55.285464 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18048): Terminated: ok {rc=0} 06:32:55.295486 --- ParallelTerminationStrategy: PID 18049 died... 06:32:55.350667 run iperf3-srv_10.42.42.10(pid=18049): Terminated {rc=256} 06:32:55.360677 --- ParallelTerminationStrategy: PID 18052 died... 06:32:55.416141 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18052): Terminated: ok {rc=0} 06:32:55.426179 --- ParallelTerminationStrategy: PID 18055 died... 06:32:55.481637 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18055): Terminated: ok {rc=0} 06:32:55.491773 --- ParallelTerminationStrategy: PID 18058 died... 06:32:55.547798 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18058): Terminated: ok {rc=0} 06:32:55.635599 bus /gobi_0: Setting Powered False 06:32:56.742126 bus /gobi_0: Setting Powered False 06:32:57.852837 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18056): Process ended prematurely: osmo-stp_10.42.42.5(pid=18056) [trial-2400↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18056)]