Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=15478): Process ended prematurely: osmo-stp_10.42.42.5(pid=15478) [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15478)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 06:03:56.794681 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:03:56.806846 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 06:03:56.977122 tst ping_idle_ping.py: using LAC 38909 06:03:57.106825 tst ping_idle_ping.py: using RAC 149 06:03:57.234290 tst ping_idle_ping.py: using CellId 38909 06:03:57.361760 tst ping_idle_ping.py: using BVCI 38910 06:03:57.386880 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:03:57.398497 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:03:57.409900 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:03:57.421229 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:03:57.432427 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:03:57.443833 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:03:57.455373 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:03:57.466757 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:03:57.746962 tst ping_idle_ping.py:24: start network... 06:03:57.879192 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:03:58.360504 run create_hlr_db(pid=15472): Launched 06:03:58.537077 bus /gobi_6: Setting Powered False 06:03:59.557592 run create_hlr_db(pid=15472): Terminated: ok {rc=0} 06:03:59.988348 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15474): Launched 06:04:00.312903 run osmo-hlr_10.42.42.2(pid=15475): Launched 06:04:00.431859 run osmo-stp_10.42.42.5: Starting osmo-stp 06:04:01.052542 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15477): Launched 06:04:01.435720 run osmo-stp_10.42.42.5(pid=15478): Launched 06:04:01.610412 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:04:02.249307 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15480): Launched 06:04:02.361225 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:04:02.626861 run patchelf(pid=15481): Launched 06:04:02.805362 run osmo-stp_10.42.42.5(pid=15478): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15478)] 06:04:02.936058 run osmo-stp_10.42.42.5(pid=15478): stdout: | (launched: 2022-12-14_06:04:01.210058) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:04:03.067774 run osmo-stp_10.42.42.5(pid=15478): stderr: | �[0;m�[38;5;43m20221214060401535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214060401535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214060401536 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214060401536 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214060401538 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214060401539 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214060401540 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:04:03.194372 run osmo-stp_10.42.42.5(pid=15478): stdout: | (launched: 2022-12-14_06:04:01.210058) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:04:03.319528 run osmo-stp_10.42.42.5(pid=15478): stderr: | �[0;m�[38;5;43m20221214060401535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214060401535 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214060401536 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214060401536 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214060401538 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214060401539 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214060401540 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:04:03.464284 run patchelf(pid=15481): Terminating (SIGINT) 06:04:03.635243 run patchelf(pid=15481): Terminated: ok {rc=0} 06:04:03.666370 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=15478): Process ended prematurely: osmo-stp_10.42.42.5(pid=15478) [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15478)] [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 06:04:03.675270 tst ping_idle_ping.py:27: Test FAILED (6.9 sec) 06:04:03.735895 run osmo-hlr_10.42.42.2(pid=15475): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15475)] 06:04:03.785101 run osmo-hlr_10.42.42.2(pid=15475): stdout: | (launched: 2022-12-14_06:04:00.153755) 06:04:03.835312 run osmo-hlr_10.42.42.2(pid=15475): stderr: | �[0;m�[1;31m20221214060400350 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214060400350 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214060400350 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214060400350 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214060400350 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214060400350 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214060400363 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214060400371 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214060400371 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214060400371 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:04:03.878300 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15474): Terminating (SIGTERM) 06:04:03.918673 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15477): Terminating (SIGTERM) 06:04:03.959050 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15480): Terminating (SIGTERM) 06:04:03.968205 --- ParallelTerminationStrategy: PID 15474 died... 06:04:04.023137 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15474): Terminated: ok {rc=0} 06:04:04.032737 --- ParallelTerminationStrategy: PID 15477 died... 06:04:04.087123 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15477): Terminated: ok {rc=0} 06:04:04.096681 --- ParallelTerminationStrategy: PID 15480 died... 06:04:04.151017 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15480): Terminated: ok {rc=0} 06:04:04.239615 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15478): Process ended prematurely: osmo-stp_10.42.42.5(pid=15478) [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15478)]